Issues 1 and 3 are corrected in the next build. #2 can you send me screenshots of what you are talking about. The setup window is configured for normal fonts I have not done any window sizing for

That works Ed. thanks! Herb, KV4FZ

On 10/26/2015 9:20 AM, Herbert Schoenbohm wrote: > How does one remove set up files with zero qsos? I used to be prompted that a created files had zero contacts and could easily delete them in Logger

Bob, I automatically down load those files thru N1MM every time I set up for a contest. Thank You! Dave Greig N3BUO Phone: (682) 422-6667

I entered CQ WW SSB with the latest program version but forgot to update wl_cty.dat. TO2A and TO4K were logged with no Pfx and no Country. After the contest I used the Tools menu to update

I was also using two recorded audio messages with COM1 PTT control. Somehow also software PTT was required on FT1000MP DVK input. This caused frequent random termination delays on release with lost

Had some issues over the weekend and I sure you cant help with the loss of AC for 7 hours. I had a comm port loss every 30 seconds or so not always the same duration. Using the space bar or enter

Herb, here are the instructions for this, I think this applies to your question ? Go to the Contest selection dialog ( >File >Open Log in Database ) and highlight the contest in the

Hi Herb, I do this all the time. Just select the contest to be deleted and press the delete key. Sometimes, I have to highlight a different contest first, then go to the one to be deleted

How to remove files with zero qsos? I used to be prompted that a created files had zero contacts and could easily delete them in Logger Classic. I have mistakenly created a bunch of orphan

Hi all, maybe I am a little bit too early. I should just wait for Rick's work on those. But anyway I should add what seems to be two more issues. Contest is WAE RTTY on V 1.0.5251 W8.1 I7-3720QM 12GB

Thanks, Gerald! You are right, I was entering the split fx from the radio. Alt+F7 works perfectly. It never occurred to me to read the manual (hi). 73, Dan, AI4WW

I have only used ESM for the past month, 99% of the time on CW. So far, so good. This w/e during CQWW SSB using the latest version, I noticed in perhaps 25% of the times when I was running the

I felt like a salesperson for the AD1C country files this CQ WW DX weekend. I am not sure why CQ put MT and WY into Zone 4; most of the 7th US call area is in Zone 3. Folks who don’t use Jim

Hi Stewart, There are options to blacklist spotter in the bandmap right click menu and also in the Telnet window Filters tab. Vytenis ly5t

Hello Rich, OK that works here I have exactly that you explain Thanks 73 Dan 2015-10-26 3:34 GMT+01:00 'James Setzler' jms_k1sd@... [N1MMLoggerplus] <N1MMLoggerplus@...>: -- Daniel

That gets rid of future bandmap pollution. How about a block delete function for spots posted by stupid/malicious poster(s) ? 73 Stewart G3RXQ

I saw the same thing here. The TO4K station showed zero points until I changed it in the log. 73 Tom W7WHY

All 5 of my TO4K QSOs correctly showed FJ as the country. But none of my TO2A contacts showed any country at all (should be FY); and I think I had to enter the corrected zone as he reported in the

You are making this much too complicated. 1. Use the "Tools > Download and install latest country file (wl_cty.dat) (Internet)" menu item. This does everything for you - the program goes to the