One possibility might be that the receive window is removing extraneous CR-LF codes. This is done in order to prevent received messages from scrolling off the screen when someone, for reasons known

Did you set up your USB codec correctly in Config->Use Logger+ Audio and Config->Logger+ Audio Setup ? Don't forget to check the "Internal Radio Codec" checkbox. 73, Steve, N2IC

I'd bet dollars to donuts there is something wrong with your CW messages file. Either one or more lines are missing, the comment indicator # is missing from the beginning of a comment line, or there

You minimized the digital window. When the window is minimized it goes and sits in the taskbar with the main N1MM icon. It is this was for most of the N1MM windows.. 73 Rick N2AMG

One possibility: Sometimes N1MM+ opens up a warning or error window during startup which must be responded to. For example, if I have it configured to talk to the radio on a USB port and that USB

Setting Up for CQWW-SSB I am looking for some help in setting up voice keying from N1MM+ (latest version) to my new FTDX5K MP via the Yaesu SCU-17 USB Interface. I have all my WAV files in the

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the N1MMLoggerplus group. File : /CWT_CallHistory_VE2FK_1512.txt Uploaded

Hi, James. I’m using high tones. 73, Mark

justcurious, what tones were you using, high or low tones, with 2 tone? >On 9/29/2015 3:17:04 PM, mpklocksin@... [N1MMLoggerplus](N1MMLoggerplus@...) wrote: > > First, thanks to all

If you have an ICOM radio with a REMOTE jack on the back, you can read and write to the VFO using a CT-17 level converter cable. The factory ICOM cable works fine but is rather expensive - about $130.

First, thanks to all those programmers who have worked sohard to bring us an incredible suite of software for amateur radio! I’ve enjoyed using MMTTY and 2Tone since shortly after 2Tonewas

I have a HP Pavilion PC with Windows8 and a Rigblaster Advantage interface. MMVARI and MMTTY has been running OK. I have installed FLDIGI and it sends and receives PSK31 and RTTY . But using {ENTER}

Hello Andy, Did you check function keys mapping as it is shown in this picture

Sorry, i am back on the SAC contest again using N1MM+ During this contest I had to revert back to N1MM. N1MM+ ===== I have checked the MACROs and they are the same as N1MM In "RUN" everything is

Did you open the DI Window? Tom W1TO

ahh not hidden, but what was in the toolbar looked like the opening splash screen logo thing so ignored it when I clicked on it the text window appeared huh,,,� Joe WB9SBD

It's probably hidden behind the entry window. Several of us ran into that lately. For me, it was smaller than it used to be. Moving the entry window make make it visible. You might be able to find it

(b) for truly ad lib text, you can use the transmit text pane below the received text pane and above those buttons to type text, and use the TX and RX buttons to control PTT; in digital modes, Ctrl+K

We had the same problem with K1SFA log. Only appears to be CQWW RTTY log problem. 73, Tom W1TO

I read the section in the manual about recovering a deleted QSO. n1mmplus.hamdocs.com/tiki-index.php?page=Edit+Contact+Window#How_to_Recover_a_Deleted_QSO_revisions_thanks_to_W9WI_and_K0RC_ and I