John, So far so good! The program is set to an SSB contest and the configuration of the radio port worked. I have now have the SSB frequency showing..... ...next? -- Kindest regards, Charles

Ad, I don’t recommend that anyone unplugs a USB cable when the program is running. This can cause a RunTime error. John, K3CT

Charles, This is a local configuration issue. See if you can crack the nut with this technique. In the Logger+ program, open a non-digital contest like CQWW SSB, and set the program mode

Hi all, I had the same problem after installing Windows10. Using COM3 for CAT. Still no final solution but I found the following temporary solution. After starting N1MM+ and

Sam, This is a technique used to switch contests rapidly. You cannot open two programs at the same time or open two contests at the same time. This is why you cannot find the topic in the

Hi Rick, In L32 I have COM8 set up for PTT with the TS990 (COM 3 is actually used for a second radio). I did try COM 8 in N1MM+ and got the same result as when I used COM 3. Does that make

I can’t tell you about connecting the 990S but you will get that error message about COM3. The logger passes com 3 off to the MMVARI engine. The next time it checks the com ports it is telling you

Hi All, Attempting to connect N1MM+ to TS990S and unable to succeed. The connection works fine in Logger32

Hello all, I'm interested in finding out if anyone has used N1MM+ on a Dell Optiplex 780 USFF computer? I'm particularly interested if you are using Win 10 and especially interested if you have

This has been an interesting exchange. I never knew you could operate two programs at the same time and have been reading the instruction manual but can't find the proper method. John, can you explain

Should not be a problem. Tell us more about the symptoms. 73, Pete N4ZRDownload the new N1MM Logger+ at . Check out the Reverse Beacon Network at , now spotting RTTY activity worldwide. For

John, You're right, it's working. If the multiplier window is not open when I change contests, the callsign field in the new contest's entry window is white and the cursor is

Have installed N1MM+ to Windows 10 upgrade. Everything seems to function fine except telnet will not connect to any Clusters. Can anyone help

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the N1MMLoggerplus group. File : /CWT_CallHistory_VE2FK_1509.txt Uploaded

Must be something wrong in your local config, Andrew (maybe f-key definitions?). NL+ wkd fine here using ESM during SAC. 73, Olli - DH8BQA Contest, DX & radio projects:

Version 1.0.5221 (September 22, 2015) 1. Automatic newexe download: expanded the time allowed to download (Coded by N1MM) Note that this will change when you download the NEXT version, not this

This suggests that your Function Key messages file and your definition of the ESM sequence on the Function Keys tab in the Configurer are out of sync. Take a look at. Make sure that your

SAC CONTEST. I had to revert to my N1MM. N1MM+ I found I could not use ESM. Run - Calling CQ etc worked fine. S&P was chaotic. Pressing return would send his callsign I wud Put in his number pressing

Steve, I opened the windows you listed. Starting with the cursor in the Callsign box, I switched between contests with Alt+F, 2. The cursor always returns to the Callsign box when the Entry

Beware... we discovered a bug this morning in the ADIF import process. It is supposed to block you if you try to import contacts from an ADIF file to other than the same contest, but