Date   

Re: ARRL VHF cw function keys

Jamie WW3S
 

you may need to expand the entry window to see some labels....

------ Original Message ------
From: "Tad Danley" <tdanley@centurylink.net>
To: N1MMLoggerPlus@groups.io
Sent: 1/16/2021 12:45:29 PM
Subject: Re: [N1MM+] ARRL VHF cw function keys

Also, in S&P I use only F2, F4, F6, F8

Tad Danley, K3TD

On 1/16/2021 12:43 PM, Tad Danley wrote:
Thanks - not using the run keys, I am S&P only in cw!

Tad Danley, K3TD

On 1/16/2021 12:41 PM, Jamie WW3S wrote:
You don’t have some labeled...see F1 under run, after the comma you
have CQ Test....that’s the label.....see under F2, after the comma
the macro starts , no label....
On Jan 16, 2021, at 12:38 PM, Tad Danley <tdanley@centurylink.net>
wrote:

#
# CW Function Key File
#
# This file can be used in most CW contests that have a simple exchange
# The {EXCH} macro uses the contents of the Sent Exchange box in the
contest setup
# The {SENTRSTCUT} defaults to 5NN. If you want to send another signal
report,
# change the Sent RST in the Entry Window before transmitting your
exchange.
#
# F5 uses "!" macro for his callsign
# Do not use the {CALL} macro in place of the ! macro
#
# S&P F1 calls QRL? before placing the program in RUN mode for
calling CQ
# To respond to caller, send F5 then F2, or ; (default exchange key) or
# Insert, or Enter in ESM
#
###################
# RUN Messages
###################
F1 Cq,Cq Test {MYCALL} {MYCALL}
F2 Exch,{SENTRSTCUT} {EXCH}
F3 Tu,Tu {MYCALL}
F4 {MYCALL},K3TD
F5 His Call,!
F6 Repeat,{SENTRSTCUT} {EXCH} {EXCH}
F7 Spare,
F8 Agn?,Agn?
F9 Nr?,Nr?
F10 Call?,Cl?
F11 Spare,
F12 Wipe,{WIPE}
#
###################
# S&P Messages
###################
F1 N/A,
F2 Exch,TU FM05
F3 N/A,
F4 K3TD,K3~TD
F5 N/A
F6 EXCH,FM05 FM05
F7 N/A,
F8 Agn?,?
F9 N/A,
F10 TAD,TAD TAD
F11 N/A,
F12 Wipe,{WIPE}

Tad, K3TD

On 1/16/2021 12:29 PM, Tom Wagner (N1MM) wrote:
Copy/paste the entire list here. Do not remove lines you think are
unnecessary.

Tom - N1MM


On 1/16/2021 12:27 PM, Tad Danley wrote:
Running the latest 1.0.8891.0 Able to edit the function keys for CW
fine, but not able to change the labels to match. Rig is in CW
mode and
S&P selected. Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com











--
This email has been checked for viruses by AVG.
https://www.avg.com









Re: ARRL VHF cw function keys

Jamie WW3S
 

the convention is the same.....you have F1/F3/F5/F7/F9/F11 labeled has N/A....if you want them to say something else.....edit the file......whatever you type in first, is the label

F1 This is a label, this is the macro
F3 Label, Macro
F5 LABEL, get the idea?

------ Original Message ------
From: "Tad Danley" <tdanley@centurylink.net>
To: N1MMLoggerPlus@groups.io
Sent: 1/16/2021 12:45:29 PM
Subject: Re: [N1MM+] ARRL VHF cw function keys

Also, in S&P I use only F2, F4, F6, F8

Tad Danley, K3TD

On 1/16/2021 12:43 PM, Tad Danley wrote:
Thanks - not using the run keys, I am S&P only in cw!

Tad Danley, K3TD

On 1/16/2021 12:41 PM, Jamie WW3S wrote:
You don’t have some labeled...see F1 under run, after the comma you
have CQ Test....that’s the label.....see under F2, after the comma
the macro starts , no label....
On Jan 16, 2021, at 12:38 PM, Tad Danley <tdanley@centurylink.net>
wrote:

#
# CW Function Key File
#
# This file can be used in most CW contests that have a simple exchange
# The {EXCH} macro uses the contents of the Sent Exchange box in the
contest setup
# The {SENTRSTCUT} defaults to 5NN. If you want to send another signal
report,
# change the Sent RST in the Entry Window before transmitting your
exchange.
#
# F5 uses "!" macro for his callsign
# Do not use the {CALL} macro in place of the ! macro
#
# S&P F1 calls QRL? before placing the program in RUN mode for
calling CQ
# To respond to caller, send F5 then F2, or ; (default exchange key) or
# Insert, or Enter in ESM
#
###################
# RUN Messages
###################
F1 Cq,Cq Test {MYCALL} {MYCALL}
F2 Exch,{SENTRSTCUT} {EXCH}
F3 Tu,Tu {MYCALL}
F4 {MYCALL},K3TD
F5 His Call,!
F6 Repeat,{SENTRSTCUT} {EXCH} {EXCH}
F7 Spare,
F8 Agn?,Agn?
F9 Nr?,Nr?
F10 Call?,Cl?
F11 Spare,
F12 Wipe,{WIPE}
#
###################
# S&P Messages
###################
F1 N/A,
F2 Exch,TU FM05
F3 N/A,
F4 K3TD,K3~TD
F5 N/A
F6 EXCH,FM05 FM05
F7 N/A,
F8 Agn?,?
F9 N/A,
F10 TAD,TAD TAD
F11 N/A,
F12 Wipe,{WIPE}

Tad, K3TD

On 1/16/2021 12:29 PM, Tom Wagner (N1MM) wrote:
Copy/paste the entire list here. Do not remove lines you think are
unnecessary.

Tom - N1MM


On 1/16/2021 12:27 PM, Tad Danley wrote:
Running the latest 1.0.8891.0 Able to edit the function keys for CW
fine, but not able to change the labels to match. Rig is in CW
mode and
S&P selected. Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com











--
This email has been checked for viruses by AVG.
https://www.avg.com









Re: ARRL VHF cw function keys

Tad Danley
 

Also, in S&P I use only F2, F4, F6, F8

Tad Danley, K3TD

On 1/16/2021 12:43 PM, Tad Danley wrote:
Thanks - not using the run keys, I am S&P only in cw!

Tad Danley, K3TD

On 1/16/2021 12:41 PM, Jamie WW3S wrote:
You don’t have some labeled...see F1 under run, after the comma you
have CQ Test....that’s the label.....see under F2, after the comma
the macro starts , no label....
On Jan 16, 2021, at 12:38 PM, Tad Danley <tdanley@centurylink.net>
wrote:

#
# CW Function Key File
#
# This file can be used in most CW contests that have a simple exchange
# The {EXCH} macro uses the contents of the Sent Exchange box in the
contest setup
# The {SENTRSTCUT} defaults to 5NN. If you want to send another signal
report,
#  change the Sent RST in the Entry Window before transmitting your
exchange.
#
# F5 uses "!" macro for his callsign
# Do not use the {CALL} macro in place of the ! macro
#
# S&P F1 calls QRL? before placing the program in RUN mode for
calling CQ
# To respond to caller, send F5 then F2, or ; (default exchange key) or
#   Insert, or Enter in ESM
#
###################
#   RUN Messages
###################
F1 Cq,Cq Test {MYCALL} {MYCALL}
F2 Exch,{SENTRSTCUT} {EXCH}
F3 Tu,Tu {MYCALL}
F4 {MYCALL},K3TD
F5 His Call,!
F6 Repeat,{SENTRSTCUT} {EXCH} {EXCH}
F7 Spare,
F8 Agn?,Agn?
F9 Nr?,Nr?
F10 Call?,Cl?
F11 Spare,
F12 Wipe,{WIPE}
#
###################
#   S&P Messages
###################
F1 N/A,
F2 Exch,TU FM05
F3 N/A,
F4 K3TD,K3~TD
F5 N/A
F6 EXCH,FM05 FM05
F7 N/A,
F8 Agn?,?
F9 N/A,
F10 TAD,TAD TAD
F11 N/A,
F12 Wipe,{WIPE}

Tad, K3TD

On 1/16/2021 12:29 PM, Tom Wagner (N1MM) wrote:
Copy/paste the entire list here. Do not remove lines you think are
unnecessary.

Tom - N1MM


On 1/16/2021 12:27 PM, Tad Danley wrote:
Running the latest 1.0.8891.0  Able to edit the function keys for CW
fine, but not able to change the labels to match.  Rig is in CW
mode and
S&P selected.  Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com











--
This email has been checked for viruses by AVG.
https://www.avg.com





Re: ARRL VHF cw function keys

Tad Danley
 

Thanks - not using the run keys, I am S&P only in cw!

Tad Danley, K3TD

On 1/16/2021 12:41 PM, Jamie WW3S wrote:
You don’t have some labeled...see F1 under run, after the comma you have CQ Test....that’s the label.....see under F2, after the comma the macro starts , no label....
On Jan 16, 2021, at 12:38 PM, Tad Danley <tdanley@centurylink.net> wrote:

#
# CW Function Key File
#
# This file can be used in most CW contests that have a simple exchange
# The {EXCH} macro uses the contents of the Sent Exchange box in the
contest setup
# The {SENTRSTCUT} defaults to 5NN. If you want to send another signal
report,
# change the Sent RST in the Entry Window before transmitting your
exchange.
#
# F5 uses "!" macro for his callsign
# Do not use the {CALL} macro in place of the ! macro
#
# S&P F1 calls QRL? before placing the program in RUN mode for calling CQ
# To respond to caller, send F5 then F2, or ; (default exchange key) or
# Insert, or Enter in ESM
#
###################
# RUN Messages
###################
F1 Cq,Cq Test {MYCALL} {MYCALL}
F2 Exch,{SENTRSTCUT} {EXCH}
F3 Tu,Tu {MYCALL}
F4 {MYCALL},K3TD
F5 His Call,!
F6 Repeat,{SENTRSTCUT} {EXCH} {EXCH}
F7 Spare,
F8 Agn?,Agn?
F9 Nr?,Nr?
F10 Call?,Cl?
F11 Spare,
F12 Wipe,{WIPE}
#
###################
# S&P Messages
###################
F1 N/A,
F2 Exch,TU FM05
F3 N/A,
F4 K3TD,K3~TD
F5 N/A
F6 EXCH,FM05 FM05
F7 N/A,
F8 Agn?,?
F9 N/A,
F10 TAD,TAD TAD
F11 N/A,
F12 Wipe,{WIPE}

Tad, K3TD

On 1/16/2021 12:29 PM, Tom Wagner (N1MM) wrote:
Copy/paste the entire list here. Do not remove lines you think are
unnecessary.

Tom - N1MM


On 1/16/2021 12:27 PM, Tad Danley wrote:
Running the latest 1.0.8891.0 Able to edit the function keys for CW
fine, but not able to change the labels to match. Rig is in CW mode and
S&P selected. Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com










--
This email has been checked for viruses by AVG.
https://www.avg.com


Re: ARRL VHF cw function keys

Jamie WW3S
 

You don’t have some labeled...see F1 under run, after the comma you have CQ Test....that’s the label.....see under F2, after the comma the macro starts , no label....

On Jan 16, 2021, at 12:38 PM, Tad Danley <tdanley@centurylink.net> wrote:

#
# CW Function Key File
#
# This file can be used in most CW contests that have a simple exchange
# The {EXCH} macro uses the contents of the Sent Exchange box in the
contest setup
# The {SENTRSTCUT} defaults to 5NN. If you want to send another signal
report,
# change the Sent RST in the Entry Window before transmitting your
exchange.
#
# F5 uses "!" macro for his callsign
# Do not use the {CALL} macro in place of the ! macro
#
# S&P F1 calls QRL? before placing the program in RUN mode for calling CQ
# To respond to caller, send F5 then F2, or ; (default exchange key) or
# Insert, or Enter in ESM
#
###################
# RUN Messages
###################
F1 Cq,Cq Test {MYCALL} {MYCALL}
F2 Exch,{SENTRSTCUT} {EXCH}
F3 Tu,Tu {MYCALL}
F4 {MYCALL},K3TD
F5 His Call,!
F6 Repeat,{SENTRSTCUT} {EXCH} {EXCH}
F7 Spare,
F8 Agn?,Agn?
F9 Nr?,Nr?
F10 Call?,Cl?
F11 Spare,
F12 Wipe,{WIPE}
#
###################
# S&P Messages
###################
F1 N/A,
F2 Exch,TU FM05
F3 N/A,
F4 K3TD,K3~TD
F5 N/A
F6 EXCH,FM05 FM05
F7 N/A,
F8 Agn?,?
F9 N/A,
F10 TAD,TAD TAD
F11 N/A,
F12 Wipe,{WIPE}

Tad, K3TD

On 1/16/2021 12:29 PM, Tom Wagner (N1MM) wrote:
Copy/paste the entire list here. Do not remove lines you think are
unnecessary.

Tom - N1MM


On 1/16/2021 12:27 PM, Tad Danley wrote:
Running the latest 1.0.8891.0 Able to edit the function keys for CW
fine, but not able to change the labels to match. Rig is in CW mode and
S&P selected. Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com











Re: ARRL VHF cw function keys

Tad Danley
 

#
# CW Function Key File
#
# This file can be used in most CW contests that have a simple exchange
# The {EXCH} macro uses the contents of the Sent Exchange box in the
contest setup
# The {SENTRSTCUT} defaults to 5NN. If you want to send another signal
report,
#  change the Sent RST in the Entry Window before transmitting your
exchange.
#
# F5 uses "!" macro for his callsign
# Do not use the {CALL} macro in place of the ! macro
#
# S&P F1 calls QRL? before placing the program in RUN mode for calling CQ
# To respond to caller, send F5 then F2, or ; (default exchange key) or
#   Insert, or Enter in ESM
#
###################
#   RUN Messages
###################
F1 Cq,Cq Test {MYCALL} {MYCALL}
F2 Exch,{SENTRSTCUT} {EXCH}
F3 Tu,Tu {MYCALL}
F4 {MYCALL},K3TD
F5 His Call,!
F6 Repeat,{SENTRSTCUT} {EXCH} {EXCH}
F7 Spare,
F8 Agn?,Agn?
F9 Nr?,Nr?
F10 Call?,Cl?
F11 Spare,
F12 Wipe,{WIPE}
#
###################
#   S&P Messages
###################
F1 N/A,
F2 Exch,TU FM05
F3 N/A,
F4 K3TD,K3~TD
F5 N/A
F6 EXCH,FM05 FM05
F7 N/A,
F8 Agn?,?
F9 N/A,
F10 TAD,TAD TAD
F11 N/A,
F12 Wipe,{WIPE}

Tad, K3TD

On 1/16/2021 12:29 PM, Tom Wagner (N1MM) wrote:
Copy/paste the entire list here. Do not remove lines you think are
unnecessary.

Tom - N1MM


On 1/16/2021 12:27 PM, Tad Danley wrote:
Running the latest 1.0.8891.0  Able to edit the function keys for CW
fine, but not able to change the labels to match.  Rig is in CW mode and
S&P selected.  Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com








Re: ARRL VHF cw function keys

Tom Wagner (N1MM)
 

Copy/paste the entire list here. Do not remove lines you think are unnecessary.

Tom - N1MM

On 1/16/2021 12:27 PM, Tad Danley wrote:
Running the latest 1.0.8891.0  Able to edit the function keys for CW
fine, but not able to change the labels to match.  Rig is in CW mode and
S&P selected.  Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com





ARRL VHF cw function keys

Tad Danley
 

Running the latest 1.0.8891.0  Able to edit the function keys for CW
fine, but not able to change the labels to match.  Rig is in CW mode and
S&P selected.  Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com


Re: Defect at 1.0.8869 version

Rick Ellison
 

Igor What TNC are you using??

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Igor ananyev
Sent: Saturday, January 16, 2021 9:33 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] Defect at 1.0.8869 version

 

 

Hi all!

From v.8869 there appeared stable defect in DI1 RTTY Mode Other window.

RX and TX text are in TX part of the window both. RX pane is empty.

And very old minor defect at the right clicking in this window:

RX Clear works as should,

TX Clear does nothing,

Command Clear wipes TX pane, but not Command.

 

73! Igor, UC6N

 

 


Virus-free. www.avast.com


Re: Switching to Alternate Radio in SO2R not working correctly

Art Suberbielle
 

Steve,

This works fine as expected. Thanks for the fix! And great job in the NAQP! See you in the Sprint.

73,
Art KZ5D


On Fri, Jan 15, 2021 at 8:18 PM Steve London <n2ic@...> wrote:
This sounds similar to the issues that N3RD and K2YR reported.

I have posted an experimental version "SO2R Focus" in the experimental files area.

73,
Steve, N2IC

On 01/15/2021 07:09 PM, Art Suberbielle wrote:
> I use the Sprint setup that N2IC details with functions keys. I have been using
> it for years with no issues. However, when I tried to use it in the Thursday
> night sprint, I found that I could not switch to alternate radio after one or
> two switching back and forth.
>
> Here's the sequence using the latest update 1.0.8891:
>
> 1 - Radio 1 : CQ using F1
>
> 2 - No answer so used Fkey to send my call on alternate radio (F10 on my setup).
> This works sometimes, but not always.
>
> 3 - Send CQ on alternate radio -Radio 1 (F7 in my setup). Does not switch here.
>
> I am using a DX-Doubler and the lights on it indicate that transmit should be
> occurring on radio 1 but in the Entry window, the correct lights are not
> indicated nor is anything transmitted on Radio 1 in this 3rd sequence.
>
> I know this all worked perfectly for the NAQP when I was using 1.0.8841. Went
> back and re-installed that version and everything works fine.
>
> There appears to be a glitch in the programs updates after that one.
>
> Please take a look at it. This may be caused by whatever was causing the
> backslash key not to work properly.
>
> Thanks.
>
> 73,
> Art KZ5D
>
>






Experimental code posted

John Bednar
 

If you are using Logger+ Audio concatenating audio player and have time to test code, I posted an experimental version at the link below.

 

https://n1mmwp.hamdocs.com/mmfiles/all-submitted-changes-plus-logger-audio-concatenating-audio-player-parser/

 

The build contains all pending changes for Tuesdays release. The specific parser changes are included below.

 

John, K3CT

 

 

Logger+ Audio: Concatenating audio player parser changes.

-          Allow a function key message to start with a wav file prior to the callsign macro (!).

-          Check each letter file during the function key parsing for existence, read permission, and matching wav file properties.

-          Skip any wav file during the parsing that is a problem and display the error in a NIMB message. This is to eliminate the frequent RunTime reports from users that try to use wav files with different recording properties.

-          Added support for ? and / in the callsign.

-          A callsign ending with "/P" is played with the STROKEP.wav file.

-          Remember that concatenating the audio files before the audio player starts means a callsign changes will not update the playing message. This is supported in the non-concatenating audio player because the callsign box is checked between each wav file.


Re: Reset radio notice

IK4OMU
 
Edited

Version 1.0.8779 (December 8, 2020)
Bandmap: Move reset button and progress control to top of window for higher visibility. (K3CT) (Coded by N1MM)

Thank you very much guys!
It's exactly what I meant, it works perfectly!

73 de IK4OMU

 


Defect at 1.0.8869 version

Igor ananyev
 

 

Hi all!

From v.8869 there appeared stable defect in DI1 RTTY Mode Other window.

RX and TX text are in TX part of the window both. RX pane is empty.

And very old minor defect at the right clicking in this window:

RX Clear works as should,

TX Clear does nothing,

Command Clear wipes TX pane, but not Command.

 

73! Igor, UC6N

 

 

_._,_._,_

 


Re: SO2R and Broadcast and Flex6

Jamie WW3S
 

with the Flex, maybe, but the amp only has one RF input....

------ Original Message ------
From: "Chris DL5NAM" <dl5nam@...>
Sent: 1/16/2021 4:59:36 AM
Subject: Re: [N1MM+] SO2R and Broadcast and Flex6

... and now it work

The software for the amplifier RF2K-S has been changed. SO2R with the PA is now possible with N1MM + based on UPD and broadcast. N1MM + immediately broadcasts a change of the active window and thus the new QRG; even if only the frequency was changed a little with the VFO. The PA follows and switches to the correct QRG.
 
With a Flex6xxx and the RF2K-S, full SO2R operation can be made; And that also remotely, since devices can be controlled and monitored completely via the internet, with only an internet required on the remote side, but no PC required.
CAT or Banddata cables are not required.

The PA has PIN diodes PTT with 3ms - that should be fast enough for almost operation
 
73 Chris DL5NAM


Re: PDC or Pro Digital Contest UDC (Member)

Patrick ON6AT
 

Hi Jan,

Thanks for the info about /M
I was setting just M in the last field.

Now is correct.

73 de ON6AT Patrick


Re: PDC or Pro Digital Contest UDC (Member)

Patrick ON6AT
 

Dag Jan,

Zie hier mijn scherm:



En hier het score venster:



73 de Patrick ON6AT



Re: PDC or Pro Digital Contest UDC (Member)

PA4JJ
 

Be sure to log the /M in the last field


Op 16-1-2021 om 14:14 schreef PA4JJ:

Patrick

I use the same file but my score ixs correct.



73
Jan

PA4JJ
Op 16-1-2021 om 14:09 schreef Patrick ON6AT:
Hallo,

I have installed the PDC_MEM.UDC file for PDC or Pro Digital Contest (Member) as described.
I notice during the contest that the points are not correct.
If I work a member (eg 002 / M) then I should normally receive 6 points because I am also a member.

An example:
RT6DI sends 009 / M and I send 014 / M this should give 6 points anyway?
In the log window I only see 2 points.
In the Score window there is also no field on how many members I have worked.

How can this be adjusted?
73 Patrick ON6AT



Re: PDC or Pro Digital Contest UDC (Member)

PA4JJ
 

Patrick

I use the same file but my score ixs correct.



73
Jan

PA4JJ
Op 16-1-2021 om 14:09 schreef Patrick ON6AT:

Hallo,

I have installed the PDC_MEM.UDC file for PDC or Pro Digital Contest (Member) as described.
I notice during the contest that the points are not correct.
If I work a member (eg 002 / M) then I should normally receive 6 points because I am also a member.

An example:
RT6DI sends 009 / M and I send 014 / M this should give 6 points anyway?
In the log window I only see 2 points.
In the Score window there is also no field on how many members I have worked.

How can this be adjusted?
73 Patrick ON6AT


PDC or Pro Digital Contest UDC (Member)

Patrick ON6AT
 

Hallo,

I have installed the PDC_MEM.UDC file for PDC or Pro Digital Contest (Member) as described.
I notice during the contest that the points are not correct.
If I work a member (eg 002 / M) then I should normally receive 6 points because I am also a member.

An example:
RT6DI sends 009 / M and I send 014 / M this should give 6 points anyway?
In the log window I only see 2 points.
In the Score window there is also no field on how many members I have worked.

How can this be adjusted?
73 Patrick ON6AT


1st EU-DX CONTEST 2021

IK6QON Francesco
 

The European Dx Contest Club has the honour to invite the N1MM users to participate in the first EuropeanUnion Dx Contest “EUDX CONTEST”. 

The objective is to establish as many contacts as possible between radio amateurs around the world and radio amateurs in European Union countries. 

We invite all of you  to take part in EU DX CONTEST from 12.00 UTC on 6th February till 12:00 UTC on 7th February, 2021.

For more info please visit Eu Dx Contest Rules: 

https://eudxcc.altervista.org/eu-dx-contest/

73 Francesco IK6QON 





3681 - 3700 of 61331