Date   
Re: Audio input into K3s Problem is too low from N1MM

Irwin Darack
 

We will be VP5W in CQWW SSB next weekend. This is the radio we are taking with us. 

Thanks again, Irwin KD3TB 

On Thu, Oct 17, 2019 at 10:27 PM Ted Bryant <tlbryant02@...> wrote:

FB!

 

73, Ted W4NZ

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Irwin Darack
Sent: Thursday, October 17, 2019 7:53 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Audio input into K3s Problem is too low from N1MM

 

Thanks for sending me this. I now have everything working including the Codec USB for sound.

 

Irwin, KD3TB

 

On Thu, Oct 17, 2019 at 6:52 PM Irwin Darack via Groups.Io <idarack=gmail.com@groups.io> wrote:

No, thanks. I will try this next.

 

I now have the Line in working. Next need to focus on the USB next.

 

Irwin 

 

On Thu, Oct 17, 2019 at 3:53 PM Ted Bryant <tlbryant02@...> wrote:

I went through a similar problem when using a K3s for the recent PA QSO Party.

 

Have you tried the setup described in this document? It worked for me.

 

<https://n1mmwp.hamdocs.com/mmfiles/k3radiocodecsetup_v2a-pdf/>

 

73, Ted W4NZ

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Irwin Darack
Sent: Thursday, October 17, 2019 3:05 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Audio input into K3s Problem is too low from N1MM

 

Thanks. Tried this too. Did not solve the problem. I think something is wrong with the KIOB3 board. The USB is working as I have full rig control. When I press a Macro I Key the K3s, audio our is just too low.

 

Irwin KD3TB 

 

 

 

On Thu, Oct 17, 2019 at 1:05 PM Ted Bryant <tlbryant02@...> wrote:

Irwin,

 

In the K3s, go to:  MENU -> MIC SEL -> LInE In, use the MIC gain control to set the line in level to the desired value.

 

73, Ted W4NZ

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Irwin Darack
Sent: Thursday, October 17, 2019 12:16 PM
To: Elecraft-K3@groups.io; n1mmloggerplus@groups.io
Subject: [N1MM+] Audio input into K3s Problem is too low from N1MM

 

I am setting up for our VP5W CQWW Contest and I am having a problem getting the audio into my K3s (Line in) from my Laptop using an N1MM wave file. I have tried both using both the Codec USB and a separate stereo plug  - Line in.

 

1. I am keying the radio

2. I can hear the voice - although very low from the K3s in Monitor

3. I have the K3s set for Mic+Line  - On

4. If I use the computer speakers, the recorded message is fine.

I am thinking I have a setting wrong in the K3s?

 

Any suggestions where to look?

 

Thanks, Irwin KD3TB

--

Irwin KD3TB

--

Irwin KD3TB

--

Irwin KD3TB



--

Irwin KD3TB

--
Irwin KD3TB

Re: Cannot send CW F key messages in Split mode on K3

KY7M Lee
 

I isolated the problem to the N1MM Mode Control tab.  When "Use radio mode (default)" is selected, it will not send F key messages in SPLIT setting on CW.  When SPLIT is selected on the K3, the header on the N1MM logging window shows "Contact Mode () <> Contest mode (MIXED)!"  I am using a DX log in N1MM for general logging on our remote station for CW, Phone, and Digital QSOs.

 

When I change the Mode Control setting in N1MM to "Use Contest or Radio Mode" or "Always CW" it works normally for sending the F key CW messages in SPLIT setting.

 

Lee, KY7M

 

Re: Cannot send CW F key messages in Split mode on K3

ve3ki
 

How did you activate Split? You should always activate Split from N1MM+ using the Ctrl+S command, not by using the Split button on the radio. Likewise, you should exit from Split mode using the Ctrl+Alt+S command, not by turning Split off from the radio. Trying to control Split mode from the radio instead of from the software can lead to mismatches between the software and the radio.

Are you in SO2V or SO1V? In SO2V, it is particularly important to use software commands and not the radio buttons to control split operation and choose VFOs, and it is important to make sure that both Entry Windows are in the same mode if you want to operate Split from one of them.

Are you sure VFO B and VFO A are in the same mode? It is quite possible for VFO B to be in SSB mode while VFO A is in CW, in which case the software will detect the mode mismatch, causing it to refuse to transmit in split mode. If the radio's CW-in-SSB feature is enabled, you will be able to send CW from the paddle in this situation, but the program will still refuse to send CW function key messages.

73,
Rich VE3KI




On Fri, Oct 18, 2019 at 01:37 PM, KY7M Lee wrote:

I isolated the problem to the N1MM Mode Control tab.  When "Use radio mode (default)" is selected, it will not send F key messages in SPLIT setting on CW.  When SPLIT is selected on the K3, the header on the N1MM logging window shows "Contact Mode () <> Contest mode (MIXED)!"  I am using a DX log in N1MM for general logging on our remote station for CW, Phone, and Digital QSOs.

 

When I change the Mode Control setting in N1MM to "Use Contest or Radio Mode" or "Always CW" it works normally for sending the F key CW messages in SPLIT setting.

 

Lee, KY7M

 

Cannot Download/Install Newer Version of Program

Fred - NA2U
 

Trying to install most recent version. Have not used my version V1.0.7440.0 in quite some time. When I click “Check for New Program Version and Install” I get this error message:

Argument ‘Start’ must be greater than zero.

In my many years of using the program I have never seen this. How to proceed? Thanks.

73 from the desert,

Fred/NA2U
____________________________________________________________
Urologist Tells Men To "Fix" Their ED With This New Trick!
Med Journal
http://thirdpartyoffers.juno.com/TGL3141/5daa2ffd1d6792ffb7ea7st02vuc

Re: Cannot Download/Install Newer Version of Program

John Bednar
 

Fred,
Assuming that you have internet connectivity....
The web site went through an upgrade. It must have been awhile since you updated that computer. Download the update manually, save to your disk, and run. After this you will be back to normal.
Here is the link.
https://n1mmwp.hamdocs.com/mmfiles/n1mm-logger-update-1-0-7971-oct-15-2019/


John, K3CT

-----Original Message-----
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Fred - NA2U
Sent: Friday, October 18, 2019 5:35 PM
To: N1MMLoggerPlus <N1MMLoggerPlus@groups.io>
Subject: [N1MM+] Cannot Download/Install Newer Version of Program

Trying to install most recent version. Have not used my version V1.0.7440.0 in quite some time. When I click “Check for New Program Version and Install” I get this error message:

Argument ‘Start’ must be greater than zero.

In my many years of using the program I have never seen this. How to proceed? Thanks.

73 from the desert,

Fred/NA2U
____________________________________________________________
Urologist Tells Men To "Fix" Their ED With This New Trick!
Med Journal
http://thirdpartyoffers.juno.com/TGL3141/5daa2ffd1d6792ffb7ea7st02vuc

Re: Cannot Download/Install Newer Version of Program

Fred - NA2U
 

Manual download worked. Thanks, John.

73 from the desert,

Fred/NA2U

On Oct 18, 2019, at 2:57 PM, John Bednar via Groups.Io <k3ct=verizon.net@groups.io> wrote:

Fred,
Assuming that you have internet connectivity....
The web site went through an upgrade. It must have been awhile since you updated that computer. Download the update manually, save to your disk, and run. After this you will be back to normal.
Here is the link.
https://n1mmwp.hamdocs.com/mmfiles/n1mm-logger-update-1-0-7971-oct-15-2019/


John, K3CT


-----Original Message-----
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Fred - NA2U
Sent: Friday, October 18, 2019 5:35 PM
To: N1MMLoggerPlus <N1MMLoggerPlus@groups.io>
Subject: [N1MM+] Cannot Download/Install Newer Version of Program

Trying to install most recent version. Have not used my version V1.0.7440.0 in quite some time. When I click “Check for New Program Version and Install” I get this error message:

Argument ‘Start’ must be greater than zero.

In my many years of using the program I have never seen this. How to proceed? Thanks.

73 from the desert,

Fred/NA2U
____________________________________________________________
Urologist Tells Men To "Fix" Their ED With This New Trick!
Med Journal
http://thirdpartyoffers.juno.com/TGL3141/5daa2ffd1d6792ffb7ea7st02vuc






S & P Problem

AI9T
 

Trying to operate in the Jarts RTTY. I'm having a problem when I right click in the Digital Interface to send my Call Twice. When I do this if there is a call in the window above the call field it puts the call in the field and sends his call then mmy call twice. When I right click I only want it to send my call and not his. I had this problem last week in the Makrothen test as well. Hope this makes some sense. I must have change something that I'm not aware of.
73 Steve AI9T

Re: S & P Problem

VE2FK
 

Try a LEFT click on a call

Le 2019-10-18 à 20:20, AI9T a écrit :
Trying to operate in the Jarts RTTY. I'm having a problem when I right click in the Digital Interface to send my Call Twice. When I do this if there is a call in the window above the call field it puts the call in the field and sends his call then mmy call twice. When I right click I only want it to send my call and not his. I had this problem last week in the Makrothen test as well. Hope this makes some sense. I must have change something that I'm not aware of.
73 Steve AI9T

Aucun virus trouvé dans ce message.
Analyse effectuée par AVG - www.avg.fr
Version: 2016.0.7226 / Base de données virale: 4793/15886 - Date: 14/08/2018
La Base de données des virus a expiré.


Re: S & P Problem

AI9T
 

I'm not clicking on the call Just clicking in the window so it will send my call. If there is a call in the field above the call entry it is placing it in call field then sending that call then mine. Normally I would right click to send my call then left click on his call to put it in the entry field.
Steve

Re: S & P Problem

Rick Ellison
 

Steve..

This was changed a couple of weeks ago as a user pointed out it was not consistent across all modes. In the mark contest was the first contest that I worked with the change in place. It drove me nuts… If you right click in the DI window to send your call and a call is in the on-deck box it drops down automatically instead of sending your call like you want..

I’m not sure if I want to remove it or add a setting bypassing it if the user wants.

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of AI9T
Sent: Friday, October 18, 2019 8:21 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] S & P Problem

 

Trying to operate in the Jarts RTTY. I'm having a problem when I right click in the Digital Interface to send my Call Twice. When I do this if there is a call in the window above the call field it puts the call in the field and sends his call then mmy call twice. When I right click I only want it to send my call and not his. I had this problem last week in the Makrothen test as well. Hope this makes some sense. I must have change something that I'm not aware of.
73 Steve AI9T


Virus-free. www.avast.com

Re: S & P Problem

Rick Ellison
 

Opps makrothen

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Rick Ellison
Sent: Friday, October 18, 2019 9:00 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] S & P Problem

 

Steve..

This was changed a couple of weeks ago as a user pointed out it was not consistent across all modes. In the mark contest was the first contest that I worked with the change in place. It drove me nuts… If you right click in the DI window to send your call and a call is in the on-deck box it drops down automatically instead of sending your call like you want..

I’m not sure if I want to remove it or add a setting bypassing it if the user wants.

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of AI9T
Sent: Friday, October 18, 2019 8:21 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] S & P Problem

 

Trying to operate in the Jarts RTTY. I'm having a problem when I right click in the Digital Interface to send my Call Twice. When I do this if there is a call in the window above the call field it puts the call in the field and sends his call then mmy call twice. When I right click I only want it to send my call and not his. I had this problem last week in the Makrothen test as well. Hope this makes some sense. I must have change something that I'm not aware of.
73 Steve AI9T

 

Virus-free. www.avast.com

Re: S & P Problem

Jamie WW3S
 

why not just put it back the way it was......only one person complained, now you have many !!!!


------ Original Message ------
From: "Rick Ellison" <rellison@...>
Sent: 10/18/2019 9:00:03 PM
Subject: Re: [N1MM+] S & P Problem

Steve..

This was changed a couple of weeks ago as a user pointed out it was not consistent across all modes. In the mark contest was the first contest that I worked with the change in place. It drove me nuts… If you right click in the DI window to send your call and a call is in the on-deck box it drops down automatically instead of sending your call like you want..

I’m not sure if I want to remove it or add a setting bypassing it if the user wants.

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of AI9T
Sent: Friday, October 18, 2019 8:21 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] S & P Problem

 

Trying to operate in the Jarts RTTY. I'm having a problem when I right click in the Digital Interface to send my Call Twice. When I do this if there is a call in the window above the call field it puts the call in the field and sends his call then mmy call twice. When I right click I only want it to send my call and not his. I had this problem last week in the Makrothen test as well. Hope this makes some sense. I must have change something that I'm not aware of.
73 Steve AI9T


Virus-free. www.avast.com

Re: S & P Problem

VE2FK
 

I like it, as on CW with esm
Claude
 
 

Sent: Friday, October 18, 2019 9:00 PM
Subject: Re: [N1MM+] S & P Problem
 

Steve..

This was changed a couple of weeks ago as a user pointed out it was not consistent across all modes. In the mark contest was the first contest that I worked with the change in place. It drove me nuts… If you right click in the DI window to send your call and a call is in the on-deck box it drops down automatically instead of sending your call like you want..

I’m not sure if I want to remove it or add a setting bypassing it if the user wants.

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of AI9T
Sent: Friday, October 18, 2019 8:21 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] S & P Problem

 

Trying to operate in the Jarts RTTY. I'm having a problem when I right click in the Digital Interface to send my Call Twice. When I do this if there is a call in the window above the call field it puts the call in the field and sends his call then mmy call twice. When I right click I only want it to send my call and not his. I had this problem last week in the Makrothen test as well. Hope this makes some sense. I must have change something that I'm not aware of.
73 Steve AI9T


Virus-free. www.avast.com

Re: S & P Problem

AI9T
 

I think it need to go back or an option to set it. It is a pain for RTTY. If your trying to make rate.
Steve

Re: S & P Problem

Rick Ellison
 

Have now made a change about this. If you right click in the DI RX window the callsign in the on-Deck window does not drop into the callsign field. If you are in ESM  and the Callsign window is empty and the MyCall button if highlighted and you press Enter the Callsign will drop to the callsign window.

 

I have built an experimental version and have uploaded to the link below..

 

https://n1mmwp.hamdocs.com/mmfiles/n1mm-logger-update-1-0-7965fix-for-rtty-exe/

 

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of AI9T
Sent: Friday, October 18, 2019 10:14 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] S & P Problem

 

I think it need to go back or an option to set it. It is a pain for RTTY. If your trying to make rate.
Steve


Virus-free. www.avast.com

Re: Cannot send CW F key messages in Split mode on K3

K7XC Tim Marek
 

I thought it was just me! Whew!

My Flex 3000 suddenly refuses to send CW in split mode now with N1MM+ and KE9NS SDR software driving the SDR.

73s de Tim - K7XC - DM09jh... sk

Adapt, Overcome, Succeed!



On Fri, Oct 18, 2019 at 5:42 PM KY7M Lee <ars.ky7m@...> wrote:

I isolated the problem to the N1MM Mode Control tab.  When "Use radio mode (default)" is selected, it will not send F key messages in SPLIT setting on CW.  When SPLIT is selected on the K3, the header on the N1MM logging window shows "Contact Mode () <> Contest mode (MIXED)!"  I am using a DX log in N1MM for general logging on our remote station for CW, Phone, and Digital QSOs.

 

When I change the Mode Control setting in N1MM to "Use Contest or Radio Mode" or "Always CW" it works normally for sending the F key CW messages in SPLIT setting.

 

Lee, KY7M

 

unable to change bands (more)

James Funk
 

To clarify, once I shut down the program and restart, I simply type in the frequency of the “new band” (e.g., 7050) or click on the band/mode desired in the list on the left, as I was always able to do with N1MM but have been unable to do with N1MM+.  73, Jim N9JF

Re: S & P Problem

AI9T
 

Thanks for the quick fix Rick. Back to normal now.
73 Steve AI9T

Re: unable to change bands (more)

Ted Bryant
 

Hi Jim,

 

When this happens, what information is showing in the title bar of the Entry window?

 

Also, if you right-click in the Entry window to open the menu, is “Band Button Left Click Enabled” checked?

 

73, Ted W4NZ

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of n9jfcountyhunter@...
Sent: Friday, October 18, 2019 9:03 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] unable to change bands (more)

 

To clarify, once I shut down the program and restart, I simply type in the frequency of the “new band” (e.g., 7050) or click on the band/mode desired in the list on the left, as I was always able to do with N1MM but have been unable to do with N1MM+.  73, Jim N9JF

Re: S & P Problem

Jim W7RY
 

So what about sending CQ while in CQ mode by right clicking in the digital window regardless if there is a call in the on deck window?

Does that still work Rick?


Thanks
73
Jim W7RY
On 10/18/2019 8:00 PM, Rick Ellison wrote:

Steve..

This was changed a couple of weeks ago as a user pointed out it was not consistent across all modes. In the mark contest was the first contest that I worked with the change in place. It drove me nuts… If you right click in the DI window to send your call and a call is in the on-deck box it drops down automatically instead of sending your call like you want..

I’m not sure if I want to remove it or add a setting bypassing it if the user wants.

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of AI9T
Sent: Friday, October 18, 2019 8:21 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] S & P Problem

 

Trying to operate in the Jarts RTTY. I'm having a problem when I right click in the Digital Interface to send my Call Twice. When I do this if there is a call in the window above the call field it puts the call in the field and sends his call then mmy call twice. When I right click I only want it to send my call and not his. I had this problem last week in the Makrothen test as well. Hope this makes some sense. I must have change something that I'm not aware of.
73 Steve AI9T


Virus-free. www.avast.com