Date   
WAEDX QTC Logging

Ed W2LCQ
 

How are QTC’s logged in N1MM+? There doesn’t seem to be space for QTC information. Thanks a lot. 

73, Ed W2LCQ

Frankford Radio Club
CWops 701 - SKCC 5474 - FISTS 12294





Re: Unable to Log in to N1MM Website

Jim W7RY
 

Works here! Clear out your history on your browser?

73
Jim W7RY


Thanks
73
Jim W7RY
On 8/9/2019 5:50 PM, Chuck Dietz wrote:

Windows Network Diagnostics
Issues found
Your computer appears to be correctly configured, but the d... Detected
Contact your network administrator or Internet service provi... Completed
Issues found
< Your computer appears to be correctly configured, but the
device or resource (n1mmwp.hamdocs.com) is not
responding
Detected
Contact your network administrator or Internet service
provider (ISP)
Completed
Windows can't communicate with the device or resource
(n1mmwp.hamdocs.com). The computer or service you are trying to reach
might be temporarily unavailable.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter Ethernet driver information:
Description . . . . . . . . . . : Realtek PCIe GBE Family Controller
Manufacturer . . . . . . . . . : Realtek
Provider . . . . . . . . . . . : Realtek
Version . . . . . . . . . . . : 10.6.1001.2015
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem27.inf
Inf File Date . . . . . . . . . : Wednesday, February 24, 2016 11:27:51 PM
Section Name . . . . . . . . . : RTL8168G.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8168&rev_0c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 6
Physical Media Type . . . . . . : 14
Network Diagnostics Log
File Name: 223EC393-4EEA-456C-B624-E516DBF6CAB6.Diagnose.0.etl
Other Networking Configuration and Logs
File Name: NetworkConfiguration.cab
Collection information
Computer Name: LOGANS-DESKTOP
Windows Version: 10.0
Architecture: x64
Time: Friday, August 9, 2019 5:47:02 PM
Publisher details
Windows Network Diagnostics
Detects problems with network connectivity.
Package Version: 4.0
Publisher: Microsoft Windows
Page 1 of 1
file:///


On Fri, Aug 9, 2019 at 5:41 PM Chuck Dietz via Groups.Io <w5prChuck=gmail.com@groups.io> wrote:
Thanks, but same problem:

This site can’t be reached

n1mmwp.hamdocs.com took too long to respond.

Try:

ERR_CONNECTION_TIMED_OUT

On Fri, Aug 9, 2019 at 5:35 PM VE9AA - Mike <ve9aa@...> wrote:
Chuck,

That's the old address my friend.
https://n1mmwp.hamdocs.com/
is the new one.

Re: Unable to Log in to N1MM Website

Jim Cooper
 

On 9 Aug 2019 at 17:50, Chuck Dietz wrote:

> Windows Network Diagnostics Issues
> found Your computer appears to be
> correctly configured, but the d...
> Detected Contact your network
> administrator or Internet service
> provi... Completed

the site comes up just fine here ...
so it's either something in your browser
(try several different browsers ...
opera, safari, Chrome ... )

or your router or your ISP ... something
is blocking that site address apparently.

run ping n1mmwp.hamdocs.com  and see if you
get a response back from the server

graphic

then run a   tracert   and see if you are getting stuck
somewhere between you and the server ...

graphic

w2jc


  

Re: RSPduo N1MM+ with or without WB? #spectrum

Victor Paul
 

Thanks Rich.
I opted to do the straight to N1MM+ Spectrum window route and forgo putting WB in between.  Seemed easier with one less thing to get mis-configured. I suspect that using WB either by itself or as a feed to N1MM+ may offer some capability that omitting it doesn't afford, if so, I'd like to know what I might be missing.

I tried a couple things to see if I could get 2 spectrum windows going from the RSPduo, by putting N1MM+ in SO2V mode, opening the SDR UI and selecting Dual mode then trying to open a spectrum window from the 2nd N1MM+ Entry Window, but all I succeeded in doing was locking up N1MM+ and screwing things up pretty well.  I had to do some reboots, Permanently Delete this Window (not sure if that was necessary) and resetting some things the SDR UI that somehow got goofed up (it got itself set to Zero IF instead of Low IF, dropped its gain to almost zilch, and something else I've already forgotten).

Anyway, its up and working now on a single channel basis.  If in the future, someone comes up with a method or updated S/W to allow two spectrum windows in N1MM+ via an SDRplay RSPduo, I'd be pleased to learn of it.

73 and see you on the waterfalls,

Victor WB0TEV / V31VP

Re: Unable to Log in to N1MM Website

Don Murray
 

No problem with:


73
Don
W4WJ
EM00mg

In a message dated 8/9/2019 5:41:08 PM Central Standard Time, w5prChuck@... writes:

Thanks, but same problem:

This site can’t be reached

n1mmwp.hamdocs.com took too long to respond.

Try:

ERR_CONNECTION_TIMED_OUT

On Fri, Aug 9, 2019 at 5:35 PM VE9AA - Mike <ve9aa@...> wrote:
Chuck,

That's the old address my friend.
https://n1mmwp.hamdocs.com/
is the new one.

 


Re: Unable to Log in to N1MM Website

Chuck Dietz
 

Windows Network Diagnostics
Issues found
Your computer appears to be correctly configured, but the d... Detected
Contact your network administrator or Internet service provi... Completed
Issues found
< Your computer appears to be correctly configured, but the
device or resource (n1mmwp.hamdocs.com) is not
responding
Detected
Contact your network administrator or Internet service
provider (ISP)
Completed
Windows can't communicate with the device or resource
(n1mmwp.hamdocs.com). The computer or service you are trying to reach
might be temporarily unavailable.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter Ethernet driver information:
Description . . . . . . . . . . : Realtek PCIe GBE Family Controller
Manufacturer . . . . . . . . . : Realtek
Provider . . . . . . . . . . . : Realtek
Version . . . . . . . . . . . : 10.6.1001.2015
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem27.inf
Inf File Date . . . . . . . . . : Wednesday, February 24, 2016 11:27:51 PM
Section Name . . . . . . . . . : RTL8168G.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8168&rev_0c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 6
Physical Media Type . . . . . . : 14
Network Diagnostics Log
File Name: 223EC393-4EEA-456C-B624-E516DBF6CAB6.Diagnose.0.etl
Other Networking Configuration and Logs
File Name: NetworkConfiguration.cab
Collection information
Computer Name: LOGANS-DESKTOP
Windows Version: 10.0
Architecture: x64
Time: Friday, August 9, 2019 5:47:02 PM
Publisher details
Windows Network Diagnostics
Detects problems with network connectivity.
Package Version: 4.0
Publisher: Microsoft Windows
Page 1 of 1
file:///


On Fri, Aug 9, 2019 at 5:41 PM Chuck Dietz via Groups.Io <w5prChuck=gmail.com@groups.io> wrote:
Thanks, but same problem:

This site can’t be reached

n1mmwp.hamdocs.com took too long to respond.

Try:

ERR_CONNECTION_TIMED_OUT

On Fri, Aug 9, 2019 at 5:35 PM VE9AA - Mike <ve9aa@...> wrote:
Chuck,

That's the old address my friend.
https://n1mmwp.hamdocs.com/
is the new one.

Re: Unable to Log in to N1MM Website

VE9AA - Mike
 

(local) Browser  issue of some kind then I suspect Chuck.
That's the correct URL....but even if I put in the old one, it redirects me to the new one.

cache issue?

I dunno….sorry !

GL - (someone will know)

Mike VE9AA

Re: Telnet problem

ve3ki
 

I don't think there will be one at all if you don't put one there yourself - but on my system, the place to look is the ExportFiles folder, not the SupportFiles folder.

73,
Rich VE3KI


On Fri, Aug 9, 2019 at 06:20 PM, George Harlem wrote:
Tnx Larry. I looked there but don’t see any other .txt files so thought not correct location. 
 
George W1EBI

From George's iPhone

On Aug 9, 2019, at 3:00 PM, Larry K8UT <K8UT@...> wrote:

George,
 
On the website, in >Downloads >Additional Support Files
 
On your PC, in C:\users\<login>\Documents\N1MM Logger+\SupportFiles
 
-larry (K8UT)
 
------ Original Message ------
From: "George Harlem" <george.harlem@...>
Sent: 2019-08-09 14:41:18
Subject: Re: [N1MM+] Telnet problem
 
Where is the clusters.txt file located?
 
George W1EBI

On Fri, Aug 9, 2019 at 1:14 PM Vytenis LY5T <vytenis.sciucka@...> wrote:
I'd suggest you download https://n1mmwp.hamdocs.com/n1mmwpfiles/Download/Additional%20Support%20Files/clusters%201-10-2019.txt and replace your current clusters.txt with this one. Also rename back to clusters.txt.
There are chances that although nodes has same name, but their IP addresses are different now.
You also can enable telnet client on your PC and check connectivity to any node in the list.

73
Vytenis LY5T

 

 

Re: Unable to Log in to N1MM Website

Chuck Dietz
 

Thanks, but same problem:

This site can’t be reached

n1mmwp.hamdocs.com took too long to respond.

Try:

ERR_CONNECTION_TIMED_OUT


On Fri, Aug 9, 2019 at 5:35 PM VE9AA - Mike <ve9aa@...> wrote:
Chuck,

That's the old address my friend.
https://n1mmwp.hamdocs.com/
is the new one.

Re: Unable to Log in to N1MM Website

VE9AA - Mike
 

Chuck,

That's the old address my friend.
https://n1mmwp.hamdocs.com/
is the new one.

Re: Unable to Log in to N1MM Website

Chuck Dietz
 

This is the screen I get when I try to go to the  http://n1mmplus.hamdocs.com   website:

This site can’t be reached

n1mmplus.hamdocs.com took too long to respond.

Try:

ERR_CONNECTION_TIMED_OUT



On Fri, Aug 9, 2019 at 2:00 PM Larry K8UT <K8UT@...> wrote:
Chuck,

>unable to log in to update my N1MM+ for a couple of days

The n1mm.hamdocs.com website has not suffered from any outages, so not sure what kind of problem you're having. By "unable to login" do you mean:

1. You cannot connect to the website at n1mm.hamdocs.com? (there are no reports of folks having trouble connecting to the website)

2. You cannot login via the >website >login page? (I do not see an account for you - have you registered on the website? Regardless, you do not need an account to download the Latest Update files)

3. You cannot use the automatic update feature built into the N1MM program to update your version of N1MM? (there was a Latest Update version of N1MM released several weeks ago that got "stuck" and the automated update did not work. This has been corrected for Windows 8 and Windows 10 computers, but if you are running Windows XP or Vista you have to use the old manual method to update: close N1MM; download the Latest Update file from >Downloads >Program Files >Latest Updates Files to your PC; use Windows Explorer to execute the file; restart N1MM.

===== Reference =====
Latest Update Version 1.0.7738 (June 4, 2019)
...
Fix new program check error at startup. Auto download no longer supported on XP & Vista machines. (Coded by N1MM)
...
======================

-larry (K8UT)

------ Original Message ------
From: "Chuck Dietz" <w5prChuck@...>
Sent: 2019-08-09 14:20:40
Subject: [N1MM+] Unable to Log in to N1MM Website

I have been unable to log in to update my N1MM+ for a couple of days. It says it "took too long to respond."  I have tried various computers and Chrome and Microsoft Edge. I don't have the site in my firewall permissions in Chrome, but I don't know how to add it. I know how to change permissions that are already in the settings.  I have checked my router, but that firewall is not blocking it. I have Comcast Business Internet.

Chuck W5PR

Re: Telnet problem

George Harlem
 

Tnx Larry. I looked there but don’t see any other .txt files so thought not correct location. 

George W1EBI

From George's iPhone

On Aug 9, 2019, at 3:00 PM, Larry K8UT <K8UT@...> wrote:

George,

On the website, in >Downloads >Additional Support Files

On your PC, in C:\users\<login>\Documents\N1MM Logger+\SupportFiles

-larry (K8UT)

------ Original Message ------
From: "George Harlem" <george.harlem@...>
Sent: 2019-08-09 14:41:18
Subject: Re: [N1MM+] Telnet problem

Where is the clusters.txt file located?

George W1EBI

On Fri, Aug 9, 2019 at 1:14 PM Vytenis LY5T <vytenis.sciucka@...> wrote:
I'd suggest you download https://n1mmwp.hamdocs.com/n1mmwpfiles/Download/Additional%20Support%20Files/clusters%201-10-2019.txt and replace your current clusters.txt with this one. Also rename back to clusters.txt.
There are chances that although nodes has same name, but their IP addresses are different now.
You also can enable telnet client on your PC and check connectivity to any node in the list.

73
Vytenis LY5T

Re: Telnet problem

ve3ki
 

Merely downloading and saving the file is not enough. You have to import it into the admin database, which you do by first using the "Edit List" button under the Clusters tab in the N1MM+ Telnet window, and then by using the File > Import menu item in the Edit Telnet List window that opens up. That opens a standard Windows Open File dialog window which you can use to navigate to the new clusters.txt file and open it. On my system, this dialog window defaults to starting out in the ExportFiles subfolder, but you should be able to navigate to a different folder if you need to to find the file.

73,
Rich VE3KI


On Fri, Aug 9, 2019 at 03:36 PM, Marvin Bloomquist N5AW wrote:
Pete,
 
Screenshot attached. I added W9BG and it works. RBN is the only existing file I found that works. The others shown don't work.
 
I downloaded the file LY5T suggested. There was no clusters.txt file in the support folder and a search did not find one. I saved it in the support folder and restarted N1MM+ but it still has the old info.
 
Marv N5AW

On Fri, Aug 9, 2019 at 11:45 AM Pete Smith <n4zr@...> wrote:

Marv, what exactly happens when you try to use N1MM+'s telnet window?  Can you click on the "Edit list" button in the Telnet window and send me a screenshot of the window that opens.  I just want to crosscheck that you're using the correct file.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 8/9/2019 12:50 PM, Marvin Bloomquist N5AW wrote:
I was using N1MM's telnet function. Doesn't work for me except for RBN.  Is there something I need to do besides bringing up the telnet window?
 
I tried using the Windows telnet just to see if my computer would connect using it and it did. So seems to be something in the way I've got N1MM set up or the way it accesses the Internet. 

Marv

On Fri, Aug 9, 2019 at 11:21 AM Pete Smith <n4zr@...> wrote:

W3LPL and W9PA are two of the old reliables on the list.  I'm sure there are many others, because I tested every one back in January and deleted those that didn't respond.  Some people claim that there's an advantage in connecting to one near your QTH, but I've never been persuaded, though I probably wouldn't use a node in China. 

In any case, I think Marv's real problem was not using N1MM's own Telnet function.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 8/9/2019 11:52 AM, ve3ki wrote:
Cluster nodes seem to come and go like fireflies, and if the list is old, there might be a lot of dead links on it. There is a relatively recent list on the N1MM+ web site in the Additional Support Files gallery called "clusters 1-10-2019.txt". Download this into your Documents\N1MM Logger+\ExportFiles folder, then in the Telnet window under the Clusters tab, click on the "Edit List" button, and in the edit window that opens, use the File > Import menu item to import the newer list, then exit from the edit window. Try selecting one of the ones in the list, then click on the "Connect to [node name]" button below. If that cluster node is up (hopefully the odds are around 50-50 or better), that should give you a login prompt to which the answer is your call sign (should be in the bottom right button, programmed with a {MYCALL} macro). If the cluster node does not respond, try some of the others.

73,
Rich VE3KI




On Fri, Aug 9, 2019 at 11:26 AM, Marvin Bloomquist N5AW wrote:
New to the group and only an occasional N1MM user so please excuse me if this question has been answered before.
 
The only cluster on the list in N1MM+ I've been able to connect to is "RBN". I have the latest version of N1MM+ installed on two computers both running Windows 10 and the problem is the same on both. Since I'm using the same router on both I'm wondering if it has something to do with it. I went through the  steps outlined in the N1MM+ help doc and am able to connect using the Windows 10 telnet command. Any suggestions? 
 
Marv N5AW

 

 

Re: Telnet problem

Marvin Bloomquist N5AW
 

Pete,

Screenshot attached. I added W9BG and it works. RBN is the only existing file I found that works. The others shown don't work.

I downloaded the file LY5T suggested. There was no clusters.txt file in the support folder and a search did not find one. I saved it in the support folder and restarted N1MM+ but it still has the old info.

Marv N5AW


On Fri, Aug 9, 2019 at 11:45 AM Pete Smith <n4zr@...> wrote:

Marv, what exactly happens when you try to use N1MM+'s telnet window?  Can you click on the "Edit list" button in the Telnet window and send me a screenshot of the window that opens.  I just want to crosscheck that you're using the correct file.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 8/9/2019 12:50 PM, Marvin Bloomquist N5AW wrote:
I was using N1MM's telnet function. Doesn't work for me except for RBN.  Is there something I need to do besides bringing up the telnet window?

I tried using the Windows telnet just to see if my computer would connect using it and it did. So seems to be something in the way I've got N1MM set up or the way it accesses the Internet. 

Marv

On Fri, Aug 9, 2019 at 11:21 AM Pete Smith <n4zr@...> wrote:

W3LPL and W9PA are two of the old reliables on the list.  I'm sure there are many others, because I tested every one back in January and deleted those that didn't respond.  Some people claim that there's an advantage in connecting to one near your QTH, but I've never been persuaded, though I probably wouldn't use a node in China. 

In any case, I think Marv's real problem was not using N1MM's own Telnet function.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 8/9/2019 11:52 AM, ve3ki wrote:
Cluster nodes seem to come and go like fireflies, and if the list is old, there might be a lot of dead links on it. There is a relatively recent list on the N1MM+ web site in the Additional Support Files gallery called "clusters 1-10-2019.txt". Download this into your Documents\N1MM Logger+\ExportFiles folder, then in the Telnet window under the Clusters tab, click on the "Edit List" button, and in the edit window that opens, use the File > Import menu item to import the newer list, then exit from the edit window. Try selecting one of the ones in the list, then click on the "Connect to [node name]" button below. If that cluster node is up (hopefully the odds are around 50-50 or better), that should give you a login prompt to which the answer is your call sign (should be in the bottom right button, programmed with a {MYCALL} macro). If the cluster node does not respond, try some of the others.

73,
Rich VE3KI




On Fri, Aug 9, 2019 at 11:26 AM, Marvin Bloomquist N5AW wrote:
New to the group and only an occasional N1MM user so please excuse me if this question has been answered before.
 
The only cluster on the list in N1MM+ I've been able to connect to is "RBN". I have the latest version of N1MM+ installed on two computers both running Windows 10 and the problem is the same on both. Since I'm using the same router on both I'm wondering if it has something to do with it. I went through the  steps outlined in the N1MM+ help doc and am able to connect using the Windows 10 telnet command. Any suggestions? 
 
Marv N5AW

Re: Telnet problem

Larry K8UT
 

George,

On the website, in >Downloads >Additional Support Files

On your PC, in C:\users\<login>\Documents\N1MM Logger+\SupportFiles

-larry (K8UT)

------ Original Message ------
From: "George Harlem" <george.harlem@...>
Sent: 2019-08-09 14:41:18
Subject: Re: [N1MM+] Telnet problem

Where is the clusters.txt file located?

George W1EBI

On Fri, Aug 9, 2019 at 1:14 PM Vytenis LY5T <vytenis.sciucka@...> wrote:
I'd suggest you download https://n1mmwp.hamdocs.com/n1mmwpfiles/Download/Additional%20Support%20Files/clusters%201-10-2019.txt and replace your current clusters.txt with this one. Also rename back to clusters.txt.
There are chances that although nodes has same name, but their IP addresses are different now.
You also can enable telnet client on your PC and check connectivity to any node in the list.

73
Vytenis LY5T

Re: Unable to Log in to N1MM Website

Larry K8UT
 

Chuck,

>unable to log in to update my N1MM+ for a couple of days

The n1mm.hamdocs.com website has not suffered from any outages, so not sure what kind of problem you're having. By "unable to login" do you mean:

1. You cannot connect to the website at n1mm.hamdocs.com? (there are no reports of folks having trouble connecting to the website)

2. You cannot login via the >website >login page? (I do not see an account for you - have you registered on the website? Regardless, you do not need an account to download the Latest Update files)

3. You cannot use the automatic update feature built into the N1MM program to update your version of N1MM? (there was a Latest Update version of N1MM released several weeks ago that got "stuck" and the automated update did not work. This has been corrected for Windows 8 and Windows 10 computers, but if you are running Windows XP or Vista you have to use the old manual method to update: close N1MM; download the Latest Update file from >Downloads >Program Files >Latest Updates Files to your PC; use Windows Explorer to execute the file; restart N1MM.

===== Reference =====
Latest Update Version 1.0.7738 (June 4, 2019)
...
Fix new program check error at startup. Auto download no longer supported on XP & Vista machines. (Coded by N1MM)
...
======================

-larry (K8UT)

------ Original Message ------
From: "Chuck Dietz" <w5prChuck@...>
Sent: 2019-08-09 14:20:40
Subject: [N1MM+] Unable to Log in to N1MM Website

I have been unable to log in to update my N1MM+ for a couple of days. It says it "took too long to respond."  I have tried various computers and Chrome and Microsoft Edge. I don't have the site in my firewall permissions in Chrome, but I don't know how to add it. I know how to change permissions that are already in the settings.  I have checked my router, but that firewall is not blocking it. I have Comcast Business Internet.

Chuck W5PR

Re: Telnet problem

Pete Smith
 

Marv, what exactly happens when you try to use N1MM+'s telnet window?  Can you click on the "Edit list" button in the Telnet window and send me a screenshot of the window that opens.  I just want to crosscheck that you're using the correct file.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 8/9/2019 12:50 PM, Marvin Bloomquist N5AW wrote:

I was using N1MM's telnet function. Doesn't work for me except for RBN.  Is there something I need to do besides bringing up the telnet window?

I tried using the Windows telnet just to see if my computer would connect using it and it did. So seems to be something in the way I've got N1MM set up or the way it accesses the Internet. 

Marv

On Fri, Aug 9, 2019 at 11:21 AM Pete Smith <n4zr@...> wrote:

W3LPL and W9PA are two of the old reliables on the list.  I'm sure there are many others, because I tested every one back in January and deleted those that didn't respond.  Some people claim that there's an advantage in connecting to one near your QTH, but I've never been persuaded, though I probably wouldn't use a node in China. 

In any case, I think Marv's real problem was not using N1MM's own Telnet function.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 8/9/2019 11:52 AM, ve3ki wrote:
Cluster nodes seem to come and go like fireflies, and if the list is old, there might be a lot of dead links on it. There is a relatively recent list on the N1MM+ web site in the Additional Support Files gallery called "clusters 1-10-2019.txt". Download this into your Documents\N1MM Logger+\ExportFiles folder, then in the Telnet window under the Clusters tab, click on the "Edit List" button, and in the edit window that opens, use the File > Import menu item to import the newer list, then exit from the edit window. Try selecting one of the ones in the list, then click on the "Connect to [node name]" button below. If that cluster node is up (hopefully the odds are around 50-50 or better), that should give you a login prompt to which the answer is your call sign (should be in the bottom right button, programmed with a {MYCALL} macro). If the cluster node does not respond, try some of the others.

73,
Rich VE3KI




On Fri, Aug 9, 2019 at 11:26 AM, Marvin Bloomquist N5AW wrote:
New to the group and only an occasional N1MM user so please excuse me if this question has been answered before.
 
The only cluster on the list in N1MM+ I've been able to connect to is "RBN". I have the latest version of N1MM+ installed on two computers both running Windows 10 and the problem is the same on both. Since I'm using the same router on both I'm wondering if it has something to do with it. I went through the  steps outlined in the N1MM+ help doc and am able to connect using the Windows 10 telnet command. Any suggestions? 
 
Marv N5AW

Re: Telnet problem

George Harlem
 

Where is the clusters.txt file located?

George W1EBI


On Fri, Aug 9, 2019 at 1:14 PM Vytenis LY5T <vytenis.sciucka@...> wrote:
I'd suggest you download https://n1mmwp.hamdocs.com/n1mmwpfiles/Download/Additional%20Support%20Files/clusters%201-10-2019.txt and replace your current clusters.txt with this one. Also rename back to clusters.txt.
There are chances that although nodes has same name, but their IP addresses are different now.
You also can enable telnet client on your PC and check connectivity to any node in the list.

73
Vytenis LY5T

Re: Telnet problem

Jim Cooper
 

On 9 Aug 2019 at 11:50, Marvin Bloomquist N5AW wrote:

I was using N1MM's telnet function.
Doesn't work for me except for RBN.
Is there something I need to do
besides bringing up the telnet
window?
is it possible that your pc is in Networking mode
and is not designated as the 'Master' pc ?

only the Master pc can run the Telenet spots,
and then passes them off to the other PCs in
the network.

Unable to Log in to N1MM Website

Chuck Dietz
 

I have been unable to log in to update my N1MM+ for a couple of days. It says it "took too long to respond."  I have tried various computers and Chrome and Microsoft Edge. I don't have the site in my firewall permissions in Chrome, but I don't know how to add it. I know how to change permissions that are already in the settings.  I have checked my router, but that firewall is not blocking it. I have Comcast Business Internet.

Chuck W5PR