Date   
Re: I need help setting up fldig with my FTdx5000MP

Rick Ellison
 

Al..

All of the rig control for Fldigi is done thru N1MM. if you have rig control working correctly in N1MM then it should be passed over to Fldigi. What version of Fldigi do you have and exactly what is happening? For PTT to work with the RigBlaster you will need to select the Hardware PTT in Fldigi Select your com port and your rts/dtr settings and it should work.

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Al - N1API
Sent: Sunday, May 12, 2019 7:15 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] I need help setting up fldig with my FTdx5000MP

 

I am having an issue with getting the transmitter to key with my FTdx5000MP and fldigi.  I
am running a RIGblaster Advantage and the comport is Com17.

I have receive OK through the advantage just no transmit.

Can someone give me a clue as to what I need to get fldig running on this radio.
It was set up on the 1000 MP but for some reason I can not get this one configured.

I guess I'm confused because the rig control tab offer a number of selections and
I can't guess the correct one.  I've tried RigCAT Hamilb, Hardware PTT
(Gee they make that printing small!)

N1MM, WSJT-X, MMTTY, PSKexpress all work.  Fldigi does not.

Thanks

Al - N1API


Virus-free. www.avast.com

I need help setting up fldig with my FTdx5000MP

Al - N1API
 

I am having an issue with getting the transmitter to key with my FTdx5000MP and fldigi.  I
am running a RIGblaster Advantage and the comport is Com17.

I have receive OK through the advantage just no transmit.

Can someone give me a clue as to what I need to get fldig running on this radio.
It was set up on the 1000 MP but for some reason I can not get this one configured.

I guess I'm confused because the rig control tab offer a number of selections and
I can't guess the correct one.  I've tried RigCAT Hamilb, Hardware PTT
(Gee they make that printing small!)

N1MM, WSJT-X, MMTTY, PSKexpress all work.  Fldigi does not.

Thanks

Al - N1API

Re: error on startup telling me to load newer wl_cty file

Darrell Neron <ab2e@...>
 

Thanks Steve,
I'll check that next.
73 Darrell AB2E


From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Steve London <n2ic@...>
Sent: Sunday, May 12, 2019 5:17 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] error on startup telling me to load newer wl_cty file
 
You will need to install the old N1MM Admin.s3db from your old computer. If you
see files N1MM Admin.s3db-shm or N1MM Admin.s3db-wal, they need to be deleted.

73,
Steve, N2IC

On 05/12/2019 03:09 PM, Darrell Neron wrote:
> Tried unchecking the N1MM+ folder from OneDrive in the Documents directory on
> One Drive.
> Rebooted, but still the same problem, same error.
> Alternately, the error pops up inside the N1mM program and prompts me to email
> to the team, which I did.
> 73 Darrell AB2E
>
> --------------------------------------------------------------------------------
> *From:* N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Darrell
> Neron <ab2e@...>
> *Sent:* Sunday, May 12, 2019 4:58 PM
> *To:* N1MMLoggerPlus@groups.io
> *Subject:* Re: [N1MMLoggerPlus] error on startup telling me to load newer wl_cty
> file
> Hi Steve,
> OK yes that could be it. The new laptop came with cloud backup for Microsoft 10 Pro.
> I'll try to figure out how to exclude it.
> 73 Darrell AB2E
>
> --------------------------------------------------------------------------------
> *From:* N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Steve
> London <n2ic@...>
> *Sent:* Sunday, May 12, 2019 4:48 PM
> *To:* N1MMLoggerPlus@groups.io
> *Subject:* Re: [N1MMLoggerPlus] error on startup telling me to load newer wl_cty
> file
> Are you running some kind of cloud backup for the Documents folder on your new
> laptop ? If so, you need to exclude N1MM Logger+ from the cloud backup.
>
> See:
> https://groups.io/g/N1MMLoggerPlus/message/36189
>
> 73,
> Steve, N2IC
>




Virus-free. www.avg.com

cw keyboard

Richard Zalewski
 

Must be something I am doing since I have not seen any posts on the subject.  When I do a Ctl-K each letter I type is sent twice!!  Never had this before.

Richard 
W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV


Be joyful in hope, patient in affliction, faithful in prayer

Re: error on startup telling me to load newer wl_cty file

Steve London
 

You will need to install the old N1MM Admin.s3db from your old computer. If you see files N1MM Admin.s3db-shm or N1MM Admin.s3db-wal, they need to be deleted.

73,
Steve, N2IC

On 05/12/2019 03:09 PM, Darrell Neron wrote:
Tried unchecking the N1MM+ folder from OneDrive in the Documents directory on One Drive.
Rebooted, but still the same problem, same error.
Alternately, the error pops up inside the N1mM program and prompts me to email to the team, which I did.
73 Darrell AB2E
--------------------------------------------------------------------------------
*From:* N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Darrell Neron <ab2e@...>
*Sent:* Sunday, May 12, 2019 4:58 PM
*To:* N1MMLoggerPlus@groups.io
*Subject:* Re: [N1MMLoggerPlus] error on startup telling me to load newer wl_cty file
Hi Steve,
OK yes that could be it. The new laptop came with cloud backup for Microsoft 10 Pro.
I'll try to figure out how to exclude it.
73 Darrell AB2E
--------------------------------------------------------------------------------
*From:* N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Steve London <n2ic@...>
*Sent:* Sunday, May 12, 2019 4:48 PM
*To:* N1MMLoggerPlus@groups.io
*Subject:* Re: [N1MMLoggerPlus] error on startup telling me to load newer wl_cty file
Are you running some kind of cloud backup for the Documents folder on your new laptop ? If so, you need to exclude N1MM Logger+ from the cloud backup.
See:
https://groups.io/g/N1MMLoggerPlus/message/36189
73,
Steve, N2IC

Re: error on startup telling me to load newer wl_cty file

Darrell Neron <ab2e@...>
 

Tried unchecking the N1MM+ folder from OneDrive in the Documents directory on One Drive.
Rebooted, but still the same problem, same error.
Alternately, the error pops up inside the N1mM program and prompts me to email to the team, which I did.
73 Darrell AB2E


From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Darrell Neron <ab2e@...>
Sent: Sunday, May 12, 2019 4:58 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] error on startup telling me to load newer wl_cty file
 
Hi Steve,
OK yes that could be it. The new laptop came with cloud backup for Microsoft 10 Pro.
I'll try to figure out how to exclude it.
73 Darrell AB2E


From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Steve London <n2ic@...>
Sent: Sunday, May 12, 2019 4:48 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] error on startup telling me to load newer wl_cty file
 
Are you running some kind of cloud backup for the Documents folder on your new laptop ? If so, you need to exclude N1MM Logger+ from the cloud backup.

See:
https://groups.io/g/N1MMLoggerPlus/message/36189

73,
Steve, N2IC

Re: error on startup telling me to load newer wl_cty file

Darrell Neron <ab2e@...>
 

Hi Steve,
OK yes that could be it. The new laptop came with cloud backup for Microsoft 10 Pro.
I'll try to figure out how to exclude it.
73 Darrell AB2E


From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Steve London <n2ic@...>
Sent: Sunday, May 12, 2019 4:48 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] error on startup telling me to load newer wl_cty file
 
Are you running some kind of cloud backup for the Documents folder on your new laptop ? If so, you need to exclude N1MM Logger+ from the cloud backup.

See:
https://groups.io/g/N1MMLoggerPlus/message/36189

73,
Steve, N2IC

Re: error on startup telling me to load newer wl_cty file

Steve London
 

Are you running some kind of cloud backup for the Documents folder on your new laptop ? If so, you need to exclude N1MM Logger+ from the cloud backup.

See:
https://groups.io/g/N1MMLoggerPlus/message/36189

73,
Steve, N2IC

error on startup, looking for newer wl_cty file

Darrell Neron <ab2e@...>
 


error on startup telling me to load newer wl_cty file

Darrell Neron <ab2e@...>
 

Hello all,
I've included a screen shot. Got a new laptop and was trying to transfer settings, etc from N1MM+ to new laptop.
All seemed well, databases and earlier contest files transferred and started up fine.
Today I launched N1MM, and it gives me an error with that lengthy list of problems screen. Appears to look for a newer wl_cty file. If I answer "Yes" for the program to find and install, the program locks for most features although rig control and spots still seem to work.
Suggestions?
73 Darrell AB2E



Experimental Version Better integration between N1MM and WSJT-X/JTDX

Rick Ellison
 

I have posted an Experimental version in the Experimental directory on the
web site. This is just experimental. If you are going to do any serious
contesting don't download it.

What this version does is provide radio communication in WSJT-X and JTDX
with no virtual serial ports or anything like that. N1MM provides all of the
radio communications, and makes WSJT-X/JTDX act more like a digital engine
in N1MM. You do not need to stop the radio in N1MM while working with WSJT-X
or JTDX logging in WSJT-X and JTDX take place as they already do and N1MM
opens and closes WSJT-X/JTDX.

To accomplish this a couple of settings need to be done.

1. Make a copy of your current WSJT-X/JTDX install directory and if you have
the logger setup as SO1V or SO2V create a single new directory and paste the
contents of your current WSJT-X/JTDX directory into that newly created
directory. If you use N1MM in SO2R mode create a second directory and paste
the contents into that created directory.

2. In N1MM's config click on the mode tab and make sure the mode settings
that N1MM use to place your radio's digital mode setting are correctly set
for PSK mode. (USB,LSB,RTTY,RTTY-R,PSK,PSK-U,AFSK,AFSK-R). When N1MM loads
WSJT-X/JTDX it will place your radio into the mode that you have set for PSK
Mode. WSJT-X/JTDX will use DATA-U and DATA-L for digital modes. The Logger
will make this translation from what your settings are.

3. Open N1MM's config window and click on the digital tab. At the bottom of
that tab are entries for entering the path to where WSJT-X/JTDX resides. If
you are in SO1V and SO2V mode the second settings will be disabled. If you
are in SO2R make sure you enter a path in both locations.

The rest of the settings will need to be done after WSJT-X/JTDX opens up. So
close the config window.

If the logger is in SO1V and SO2V Mode, WSJT-X and JTDX will use the radio
associated with Entry Window #1. If the logger is in SO2R, WSJT-X/JTDX will
use the radio associated with the Entry Window that WSJT-X/JTDX was opened
from.

If the logger is in SO1V or SO2V modes the digital window and WSJT-X/JTDX
cannot be open at the same time. If the digital window is open and you open
WSJT-X/JTDX the digital window will close. If you have WSJT-X/JTDX open and
then open the digital window WSJT-X/JTDX will close. If the logger is in
SO2R mode when opening WSJT-X/JTDX it will check the window that opened
WSJT-X/JTDX to see if the digital window is open. If it is it will then
close it.

There are 2 ways to open WSJT-X/JTDX, In the Entry window call sign box the
user can type FT8 or FT4 and WSJT-X/JTDX will open. Or in the Entry Windows
you will find a new menu item under the windows menu "Load WSJT-X/JTDX" in
order for N1MM to manage the communications between N1MM and WSJT-X/JTDX you
MUST load WSJT-X/JTDX thru N1MM via the two ways mentioned. If you load the
program outside of N1MM the 2 programs will not talk to each other and you
will get an error message from either WSJT-X or JTDX.

To finish the settings open WSJT-X or JTDX by one of the 2 ways mentioned
and once it is open click File and then settings. Note all of your settings
are blank. You can either enter them all over or I will explain below how to
copy them over. To get things to work initially enter your call and your
grid. And then click on the radio tab. On the radio tab click the radio
selection dropdown and select "DX Lab Suite Commander" on that tab you will
need to select your PTT method. If you are using CAT commands via N1MM for
your radio now select CAT. For Mode if you are using a digital mode on your
radio select Data/Pkt. For split this is your choice but the interface does
support split via the Rig. Click ok to save the settings If things are
working correctly and your radio is turned on WSJT-X/JTDX should be showing
the same frequency as your radio and the green circle next to the frequency
should be green.


To save your setting from previous to the current setup: Open your windows
File manager. You will need to navigate to C:\Users\<Users
Name>\Appdata\Local
In that directory you will find some of these directories. WSJT-X, WSJT-X -
ForEW1 and maybe WSJT-X - ForEW2. Open the WSJT-X directory and copy all of
the files in that directory.
Next you will move to the WSJT-X - ForEW1 directory and paste all of the
files into it. Once you have pasted all of the files into that directory
click on the file called WSJT-X.ini after selecting it Right click on it and
select Rename. You are going to change the name from WSJT-X.ini to WSJT-X -
ForEW1.ini. Now when you open WST from the first Entry Window your settings
are saved. At some point if you open WSJT-X from the second Entry window
you will need to do the same but you will rename the .ini file WSJT-X -
ForEW2.
The first time opening WSJT-X after doing this you will need to reselect the
radio selection and save it.

Don't use this for normal contesting and if you get any error reports or
bugs you see please let me know.

73 Rick N2AMG

qso time stamp is logged as local time

Georg Isenbuerger
 

during this weekend's contests (CQ-M and Volta) N1MM logged QSOs with local time every now and then. Anybody else had that problem?

V 1.0.7658.0
Built: 03.05.2019 19:28:44

regards

Georg 
DJ6GI

Re: COM port conflict

John Bednar
 

Boyet,

 

You need to make a radio menu change. Did you follow the manual suggestions?

 

John, K3CT

 

10.28. FTDX-1200

  • The radio menu settings:
    • CAT TOT should be set to 1000 or higher.
    • CAT RATE must match the program COM port baud rate. The suggested baud rate is 38400 (38400, N, 8, 2).

 

 

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Boyet Lorenzo
Sent: Saturday, May 11, 2019 9:17 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] COM port conflict

 

I recently acquired a Yaesu FTDX-1200. I have used it on WSJT-X with no issues as far as CAT control using COM 11 is concerned. Been working FT8 without a hitch.

However, when I run N1MM Logger+ (WSJT-X is off) I always get the following error:



It's the same com port that works flawlessly in WSJT-X. Any clues as to what is happening?

Thanks in advance 
Boyet 4F3BZ

Re: Ic7100 USB connection

John Bednar
 

Yoeri,

 

Send us a snapshot of the baud rate window and your HRD com port and baud settings.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Yoeri M
Sent: Saturday, May 11, 2019 7:06 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] Ic7100 USB connection

 

Hi all

 

Trying to get the n1mm to control the ic7100 and do data modes over USB.

 

When using hrd5 control over icom is ok.

 

When using n1mm there seems to be none..

It does follow the frequencies for some minutes (but not that accurate) and than gives error (radio not responding)

 

USB power switch off in Windows is off so not the problem

Alsof not using n1mm and hrd5 at the same time 😉

 

Hope someone has some tips

 

73

 

Yoeri

On3nad

Re: Volta contse query

Phil Cooper
 

Hi Paul and the group,

Magic! Just what I needed - thankyou!

73 de Phil GU0SUP

-----Original Message-----
From: NS2N_PTA@...
Sent: Saturday, 11 May, 2019 22:24
To: "N1MMLoggerPlus@groups.io" <N1MMLoggerPlus@groups.io>
Subject: Re: [N1MMLoggerPlus] Volta contse query

Program another function key , ex. ... F10 NUM, # . The # sends the number of present qso. Right click on function key screen, and the editing window will open ... scroll down and do both the Run and the S&P portions.

Paul NS2N


Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Phil Cooper via Groups.Io <pcooper=suremail.gg@groups.io>
Sent: Saturday, May 11, 2019 5:06:28 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] Volta contse query

Hi all,

Lousy conditions (here) for the VOLTA RTTY Contest, and I am being asked for repeats of the serial number.
The only thing I can seem to send is {EXCH} which includes the CQ Zone.
Is there a way to ONLY send the serial number?

73 de Phil GU0SUP

Re: Volta contse query

John GW4SKA
 

Phil,

Just set up a macro with the number, which is ‘#’

I use the F6 button and the macro is:

F6 REPEAT REPORT,{TX}{ENTER}# # # 14 {RX}

Delete the 14 if you don’t want to send the zone.

John GW4SKA

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Phil Cooper via Groups.Io
Sent: 11 May 2019 22:06
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] Volta contse query

 

Hi all,

 

Lousy conditions (here) for the VOLTA RTTY Contest, and I am being asked for repeats of the serial number.

The only thing I can seem to send is {EXCH} which includes the CQ Zone.

Is there a way to ONLY send the serial number?

 

73 de Phil GU0SUP


Virus-free. www.avg.com

Re: SKCC Sprint

VE9AA - Mike
 

Ed,

It would appear to be a user-defined contest.
http://n1mm.hamdocs.com/tiki-list_file_gallery.php?galleryId=18&offset=150

SKCC Sprint

Ed W2LCQ
 


Can anyone tell me if there is a log for this event? And what is it called in the drop down  list? It’s not really a contest so there might not be one. Thanks for the help. 

Ed Jones W2LCQ
New York, NY
New York County (Manhattan)
Grid FN30at





Re: SSB signal detection and QSY via keyboard

Tom Wagner (N1MM)
 

On 5/10/2019 2:02 PM, Joe WB9SBD wrote:
What does get activated to make this work?


SSB signal detection and QSY via keyboard

https://youtu.be/mXhcnF-nlvc

Joe WB9SBD

Re: Volta contse query

Jim N7US
 

I changed my Run F2 to Exch,{TX}{ENTER}{SENTRST} # # 4 4 ! {RX}

 

My S&P F2 is Exch,{TX}{ENTER} TU {SENTRST} # # 4 4 {RX}

 

My S&P F7 is NR NR,{TX}{ENTER}# # {RX}

 

 

Jim N7US

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Phil Cooper via Groups.Io
Sent: Saturday, May 11, 2019 16:06
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] Volta contse query

 

Hi all,

 

Lousy conditions (here) for the VOLTA RTTY Contest, and I am being asked for repeats of the serial number.

The only thing I can seem to send is {EXCH} which includes the CQ Zone.

Is there a way to ONLY send the serial number?

 

73 de Phil GU0SUP