Date   
Re: WKUSB Speed Pot Control dysfunctional

Mark Bailey
 

Hi Art:

Just the Winkey port. It sounds like you are keying the transmitter using DTR or RTS on the serial port.

You definitely need a cable for CW keying from the Winkey to the radio - you may wish to add a cable for PTT as well.

73,

Mark, KD4D


On September 3, 2018 4:00:50 PM EDT, Art Davis <adavis1972@...> wrote:
OK, making a some progress but not there yet. After reinstalling mm on a different computer completely re-reading the manuals for everything, , the situation is that I can either have the speed control pot function properly, or have the N1MM/WKUSB actually key the radio (K3)!  I consider this to be progress because it confirms that the hardware is all working, I just can't quite get everything configured exactly right. It seems to come down to whether or not I have the CW/other box(es) checked on one or both com port lines..
Q1: With a winkey installed, should the CW/Other boxes be checked on both or just the winkey port?
Q2: There is no need for a cable running from the winkeyer to the radio for keying the XMTR. That's done thru the serial port cable, right?
Can someone confirm the proper DTR and RTS settings in the winkey config page for using a WKUSB with a Elecraft K3?

Thanks, Art N4UC

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.

Re: error n1mm

Anderson Xavier
 

Yes. Resolved.

Em Seg, 3 de set de 2018 19:18, Steve London <n2ic@...> escreveu:

Config->Configure Ports, Score Reporting tab.

Uncheck "Report Real-Time Score to Server".

What is in the "Score Reporting Server" field ?

73,
Steve, N2IC

On 09/03/2018 03:45 PM, Anderson Xavier wrote:
> in atachment error n1mm, please help me!
> _._,_._,_



Re: error n1mm

Steve London
 

Config->Configure Ports, Score Reporting tab.

Uncheck "Report Real-Time Score to Server".

What is in the "Score Reporting Server" field ?

73,
Steve, N2IC

On 09/03/2018 03:45 PM, Anderson Xavier wrote:
in atachment error n1mm, please help me!
_._,_._,_

error n1mm

Anderson Xavier
 

in atachment error n1mm, please help me!

Re: CW / SSB Freq Toggle

John Bednar
 

Joe,

Two corrections:
- The K3 Polling rate is 400ms.
- Wayne from Elecraft finds nothing wrong with the Logger+ polling string at this rate.


We discovered during a previous debug session that microHam Router does not maintain the polling intervals during congestion in Router. As I remember, when the congestion cleared, Router burst out commands and eliminated the polling interval from the original data source. Has this been corrected?


John, K3CT

-----Original Message-----
From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Joe Subich, W4TV
Sent: Monday, September 03, 2018 2:31 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] CW / SSB Freq Toggle


Drew,

What is the "Radio Polling Rate" for the K3 radio port in
N1MM+? Set it to "100% slower" and see if that doesn't
improve the reliability. If "100% slower" works, then try
"50% slower".

Polling for 8 parameters every 100 ms can be too much for
the K3. In addition, if clicking on the bandmap results
in a band change, Elecraft's programmer's documentation
calls for waiting 500 ms between sending a "change frequency"
command and any further polling/commands.

73,

... Joe, W4TV


On 2018-09-03 1:42 PM, Drew Vonada-Smith K3PA wrote:
Hi John,

No, this is running through microHam router, but nothing else is using the serial ports at the time.� No sharing software.

73,

Drew K3PA

Re: WKUSB Speed Pot Control dysfunctional

Art Davis
 

OK, making a some progress but not there yet. After reinstalling mm on a different computer completely re-reading the manuals for everything, , the situation is that I can either have the speed control pot function properly, or have the N1MM/WKUSB actually key the radio (K3)!  I consider this to be progress because it confirms that the hardware is all working, I just can't quite get everything configured exactly right. It seems to come down to whether or not I have the CW/other box(es) checked on one or both com port lines..
Q1: With a winkey installed, should the CW/Other boxes be checked on both or just the winkey port?
Q2: There is no need for a cable running from the winkeyer to the radio for keying the XMTR. That's done thru the serial port cable, right?
Can someone confirm the proper DTR and RTS settings in the winkey config page for using a WKUSB with a Elecraft K3?

Thanks, Art N4UC

Re: IARU Region 1 Field day contest

S50LD
 

Hello,

We were working as S50VZZ/p and we used N1MM+ last verzion and FD Reg 1.

73 de Lovro S50LD

On Mon, 3 Sep 2018, 15:40 TA1DX Atila, <ta1dx3@...> wrote:
Helle Dear Friends,

I took a break for a long time. On September 1-2, when I ran the program for the IARU Region 1 Field Day Contest, I only saw the FD contest option. I think this is for ARRL Field Day. I did not find IARU Field Day, is program have it?

I kept the records manually. If there is, I would like to spend it on the program for cabrillo.

Selamlar, 73!
Atila, TA1DX



SPAM E-POSTAYA HAYIR !!
E-Posta Adreslerimizin İstenmeyen Üçüncü Şahısların Eline Geçmemesi İçin, toplu mesaj yollarken Gönderenin Adresini Siliniz,
Adresleri Bcc (Gizli Alıcı) Kısmına Yazıp Gönderiniz... 
Teşekkürler...

Re: CW / SSB Freq Toggle

Joe Subich, W4TV
 

Drew,

What is the "Radio Polling Rate" for the K3 radio port in
N1MM+? Set it to "100% slower" and see if that doesn't
improve the reliability. If "100% slower" works, then try
"50% slower".

Polling for 8 parameters every 100 ms can be too much for
the K3. In addition, if clicking on the bandmap results
in a band change, Elecraft's programmer's documentation
calls for waiting 500 ms between sending a "change frequency"
command and any further polling/commands.

73,

... Joe, W4TV

On 2018-09-03 1:42 PM, Drew Vonada-Smith K3PA wrote:
Hi John,
No, this is running through microHam router, but nothing else is using the serial ports at the time.  No sharing software.
73,
Drew K3PA

Re: CW / SSB Freq Toggle

Drew Vonada-Smith K3PA
 

Hi John,

No, this is running through microHam router, but nothing else is using the serial ports at the time.  No sharing software.

73,

Drew K3PA

Re: N1MMClublogGateway written by N2AMG

Rick Ellison
 

The full Installer has been fixed…

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Rick Ellison
Sent: Monday, September 3, 2018 9:59 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MMClublogGateway written by N2AMG

 

Fulvio

If you can download the update that will function without the full installer. I will not be home for another 3 hrs as I have been at a family members camp without cell service for the past 2 days. Just got back into cell service and seen your messge. When I get home I will look and see where the full installer went from the website.

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Fulvio Galli
Sent: Monday, September 3, 2018 5:04 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] N1MMClublogGateway written by N2AMG

 

Dear Friends,

 

I'm looking for the utility N1MMClublogGateway written by N2AMG.

provides the update but not the full version.

 

Is anyone of you have the full version or guide me through a way to download it?

 

Many thanks!

73 de HB9DHG Fulvio

 

Re: N1MMClublogGateway written by N2AMG

Rick Ellison
 

Fulvio

If you can download the update that will function without the full installer. I will not be home for another 3 hrs as I have been at a family members camp without cell service for the past 2 days. Just got back into cell service and seen your messge. When I get home I will look and see where the full installer went from the website.

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Fulvio Galli
Sent: Monday, September 3, 2018 5:04 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] N1MMClublogGateway written by N2AMG

 

Dear Friends,

 

I'm looking for the utility N1MMClublogGateway written by N2AMG.

provides the update but not the full version.

 

Is anyone of you have the full version or guide me through a way to download it?

 

Many thanks!

73 de HB9DHG Fulvio

 

Re: N1MMClublogGateway written by N2AMG

Martin - A65DC
 

Superb Robert,
Thank you.


if anyone else is looking for the same thing, just let me know.


A65DC, Martin

IARU Region 1 Field day contest

TA1DX Atila
 

Helle Dear Friends,

I took a break for a long time. On September 1-2, when I ran the program for the IARU Region 1 Field Day Contest, I only saw the FD contest option. I think this is for ARRL Field Day. I did not find IARU Field Day, is program have it?

I kept the records manually. If there is, I would like to spend it on the program for cabrillo.

Selamlar, 73!
Atila, TA1DX



SPAM E-POSTAYA HAYIR !!
E-Posta Adreslerimizin İstenmeyen Üçüncü Şahısların Eline Geçmemesi İçin, toplu mesaj yollarken Gönderenin Adresini Siliniz,
Adresleri Bcc (Gizli Alıcı) Kısmına Yazıp Gönderiniz... 
Teşekkürler...

Re: N1MMClublogGateway written by N2AMG

S57AW
 

Hi Martin,

To make your life easier :-) I have it and will send you a link where you can download latest setup and update

73 Robert, S57AW

On Mon, Sep 3, 2018 at 2:51 PM, Martin - A65DC <martin.wennergren@...> wrote:
Yes Tom, N2AMG Holds the answer, but...
There must be someone out there sitting on a copy of this software willing to share it with me and Fulvio.

de A65DC


Re: N1MMPlus.pdf

Larry K8UT
 

Sante,

Thanks for catching my error. A corrected PDF has been uploaded.

-larry (K8UT)

------ Original Message ------
From: "Sante - IK0HBN via Groups.Io" <ik0hbn@...>
Sent: 2018-09-03 08:52:15
Subject: [N1MMLoggerPlus] N1MMPlus.pdf

Hello everybody,
probably it's only a date misplaced, but the last help file shows:
 N1MM Logger+ Manual  July 31, 2018
at the end of each page...
73's Sante

Re: N1MMClublogGateway written by N2AMG

Martin - A65DC
 

Yes Tom, N2AMG Holds the answer, but...
There must be someone out there sitting on a copy of this software willing to share it with me and Fulvio.

de A65DC

N1MMPlus.pdf

Sante - IK0HBN
 

Hello everybody,
probably it's only a date misplaced, but the last help file shows:
 N1MM Logger+ Manual  July 31, 2018
at the end of each page...
73's Sante

Re: N1MMClublogGateway written by N2AMG

Tom - N1MM
 

It's pretty obvious at this point that the only person who knows the answer to this question is N2AMG. 

I am locking this thread.  He can unlock it when he gives the answer. 

73,
Tom - N1MM

P.S. Please start reading the entire thread before replying to a thread.  

Re: N1MMClublogGateway written by N2AMG

Martin - A65DC
 
Edited

Hi Vilnis,

Thanks for trying to help, much appreciated, but if you click on the download link there you will see what Fulvio just posted:

Sorry, no such page.


73 Martin A65DC

Re: N1MMClublogGateway written by N2AMG

Vilnis YL2KF
 

On 03.09.2018 15:01, Fulvio Galli wrote:
Thanks all for the help, but as said before
I'm unable to find the FULL version as I get : 

Sorry, no such page.


The link of John, K3CT is referring is related to Logger32 but I need the one for N1mm+ :)
Anyway .. hoping for some additional help.

Fulvio HB9DHG

On Mon, Sep 3, 2018 at 1:01 PM John Bednar <k3ct@...> wrote:

Sante,

 

I used Google to find this link:

http://www.n2amg.com/software/logger32-fldigi-gateway/

 

I was able to download the Full Install & Update without error.

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Martin - A65DC
Sent: Monday, September 03, 2018 5:43 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MMClublogGateway written by N2AMG

 

Hello Sante,

I am looking for the same as Fulvio and that link does not work.
It says "Sorry - no such page"

73
Martin