Date   
Re: IOTA CH correction to VE2FK -ADD KA2D

Jeff Clarke
 

KU8E will be operating in two island groups with two call signs.

W4AN  - NA-138  Ameila Island , FL
KU8E   - NA-058   Jekyll Island , GA

These two groups are only about 35 miles apart in South Georgia and Northern Florida. I will probably be in NA-138 about the first 5-6 hours of the contest  then will drive to NA-058 and continue from there until about midnight or so. I will be using the mobile antenna setup that I used in this years Florida QSO Party.

Jeff KU8E

Experience with N1MM on a Windows tablet?

Rich Seifert
 

Does anyone have experience running N1MM+ (and WSJT-X) on a Windows 10 tablet? I am looking at the Asus 10.1 Transformer Mini, as it has a real (although small) keyboard, and a real USB port for attachment to the radio.

The intent is to run a VERY lightweight travel kit, with the tablet, a KX2, and a Buddistick. I will have cluster (Internet) access, but I always filter spots as tightly as possible at the cluster node, to reduce local traffic. This will be for casual DXpeditioning, and not for heavy-duty contest operation. I will transfer logs to my everyday logger (MacLoggerDX) after a trip, via ADIF export.

I’m wondering if the tablet will have sufficient horsepower, and if anyone has had problems with this kind of setup. The tablet mentioned above has a 1.92 GHz 8032 processor, $ GB of RAM, and 128 GB of Solid State memory. It runs Windows 10 (NOT Windows 10 “tablet”, which I understand has severe limitations on what applications can be loaded).

Thoughts, concerns, and alternatives are welcome.

Rich KE1B

Re: MMTTY with N1MM COM port issues and strange COM port numbers

WA5LXS
 

Thanks Rick. I could not choose EXTFSK64 in MMTTY while using the settings within N1MM, but I could set it using MMTTY in stand alone mode. After changing my COM72 port to COM11 it did not complain about the COM port. However, we have been invaded by our seven grandkids so I have not been able to verify if MMTTY is now working properly. Perhaps I need to copy EXTFSK64 to a folder inside N1MM

Dennis WA5LXS 

IC-7300 Resources Page: UPDATE 23 JULY 2018

Ian_Wade_G3NRW <g3nrw-radio@...>
 

IC-7300 Resources Page: UPDATE 23 JULY 2018

Hi

I have just updated the IC-7300 Reference Page, which incorporates several items of new material since the February update:

~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://g3nrw.net/IC-7300
~~~~~~~~~~~~~~~~~~~~~~~~~~~

First of all, thanks to the many people who sent me emails over the last few months since the introduction of the IC-7300 Resources Page last November. The reaction continues to be very positive, and several people included details of items to add to the site.

What’s new this month:

DOCUMENTATION The Icom firmware v1.30 manual

SOFTWARE There is a new entry for the home page of the Silicon Labs Virtual COM port driver for all platforms (Windows, Mac, Linux, Android.

FIRMWARE Icom recently released version 1.30 of the IC-7300 firmware.
Remember: the firmware update process includes a full reset of the rig, so if you have made any changes to user settings that you want to keep, you should save them first on an SD card, and load them back in again after the firmware update. Also remember that each firmware upgrade contains all previous upgrades, so there is no need to revert to previous versions.

HOWTOs Added links to three documents:
— Push2Tune: Detailed Push-to-Tune schematic for the IC-7300, by
W7ARK
— HOW to use fldigi and flrig with the IC-7300, by John Wells, KB0NE
— SO2R with two IC-7300s, by JA1NLX

OTHER SOFTWARE Added link to Win4Icom site

OTHER HARDWARE Three additions to this page:
— FA-AS Automatic Antenna Selector
— Analog S-meter PCB
— Wire Bale Desk Stand

That’s it for the new entries this time. I hope you find the site useful, and as usual I welcome any additions and corrections to the site for the next update to the G3NRW IC-7300 Resources Page.

26 July 2018.

--
73
Ian, G3NRW
g3nrw@...

***** Editor: TS-590 Family Resources Page: http://g3nrw.net/TS-590
***** Editor: IC-7300 Resources Page: http://g3nrw.net/IC-7300

CallHist_CQCW.txt file is updated

Jan Pieter Oelp
 

Hello All,


This email message is a notification to let you know that a CallHist_CQCW.txt file has been uploaded to the Files area of the N1MMLogger Plus group.

CQCW.zip include:
CQCW.udc and
CallHist_CQCW.txt up to #0560

This UDC is not a contest but a tool to discover a member of the CQCW-club for Working CQCWM Award when you are QRV, hi

About the policy and the rules of the club can be found at:
http://cqcw.ru/

Download and unpack memberlist at:
cqcw.ru/cqcw.zip

Uploaded by : Les G4OGB

Description : CQCW.zip Exchange is in the order RST-S RST-R Qth =SPC (SKCC State/Province/Country Codes) Name CQCW#

You can accesss this file at the URL:
http://n1mm.hamdocs.com/tiki-list_file_gallery.php?galleryId=18

To learn more about UDC (User Defined Contest) see:
http://n1mm.hamdocs.com/tiki-index.php?page=The+User+Defined+Contest+Editor&structure=N1MM+Logger+Documentation

Thanks, & 73, Jan Pieter Oelp, PA3CLQ, CQCW #239
www.pa3clq.nl/ about Gigantic DF-Antennas



---
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus

Re: IOTA CH correction to VE2FK -ADD KA2D

VE2FK
 

Hi Tom.
 
Thanks for your email and info.
DONE...  ready for next upload.
Have a nice weekend
Claude VE2FK
 
 

Sent: Wednesday, July 25, 2018 2:18 PM
Subject: [N1MMLoggerPlus] IOTA CH correction to VE2FK -ADD KA2D
 

Claude

Pleas add
KA2D, NA026
73
Tom KA2D


On 7/25/2018 1:56 PM, VE2FK wrote:
Correction:
My direct adr is ve2fk@...        not 21
 
Thanks
Claude
 


Garanti sans virus. www.avg.com

IOTA CH correction to VE2FK -ADD KA2D

Tom Carrubba KA2D
 

Claude

Pleas add
KA2D, NA026
73
Tom KA2D


On 7/25/2018 1:56 PM, VE2FK wrote:
Correction:
My direct adr is ve2fk@...        not 21
 
Thanks
Claude
 

IOTA CH correction to VE2FK

VE2FK
 

Correction:
My direct adr is ve2fk@...        not 21
 
Thanks
Claude
 

RSGB IOTA Call History

VE2FK
 

Hi Guys
This weekend is the RSGB IOTA contest.
Call History for N1MM+ updated and available at:
http://n1mmplus.hamdocs.com/tiki-list_file_gallery.php?galleryId=27

If you are operating from an island this weekend and not on the list please
send me info direct at mailto:ve21fk@...
Thanks
73 Claude VE2FK

How to log a zero

John MM0JOM
 

many contest (eg IOTA, RSGBLP) advise to log zero if no number is received in the exchange. N1MM does not like the zero and it is required to force log it  requiring multiple key strokes/mouse clicks. Is there an alternative
John
MM0JOM

Re: Log window frequency precision

Dave Sumner
 

Jim,

Actually it was Tom, N1MM, who came up with the fix last year.

I don't know what caused the change in my case, either.

73,
Dave K1ZZ


On Wednesday, July 25, 2018 7:53 AM, David Sumner <sumner@...> wrote:




On Tuesday, July 24, 2018 10:56 PM, Jim N7US <jim@...> wrote:


Hi Dave,
 
That did it!!!  I had to restart N1MM+ to make it effective (I just guessed at that).
 
It’s really strange, as I had never been in those settings, and it used to work OK.  Maybe a Windows update?
 
I wonder if that change might affect something else.
 
I don’t know how you came up with the solution, but I’m glad you did.  Thanks!
 
73, Jim N7US
 
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of David Sumner
Sent: Tuesday, July 24, 2018 21:15
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision
 
Jim, this happened to me last year. The fix required going to Windows Settings and going through the following screens:
Time & Language
Region & Language
Additional date, time, & regional settings
Change date, time, or number formats
Additional settings
Number of digits after decimal (change from 0 to 2)
 
If you get to that last step and the number of digits after the decimal is shown as 2 already, your problem must be different.
 
Good luck!
 
73,
Dave K1ZZ
 
 
 
 


 
On Tuesday, July 24, 2018 9:13 PM, Jim N7US <jim@...> wrote:
 
Sorry, John, I forgot to mention that I did.  The problem isn’t caused by too narrow a column.
 
The frequency is being stored to two decimal places, but it’s being rounded to the nearest kHz in the display in the log window.  I can select the contact and chose the option to return the frequency, and it returns to the exact frequency, not the rounded one being displayed.
 
73, Jim N7US
 
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of John Bednar
Sent: Tuesday, July 24, 2018 19:54
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision
 
Jim,
 
Did you make the frequency column wider as Rich suggested?
 
You could also make the font smaller with the fontsizer.
 
John, K3CT
 
From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Jim N7US
Sent: Tuesday, July 24, 2018 6:56 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision
 
Second request.  Any ideas?  Thanks.
 
73, Jim N7US
 
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Jim N7US
Sent: Sunday, July 22, 2018 13:26
To: N1MM Reflector <n1mmloggerplus@groups.io>
Subject: [N1MMLoggerPlus] Log window frequency precision
 
At some point, I lost the decimal points in the frequency of the log window.  I’ve searched the documentation but haven’t found the way to change the precision displayed in the window.
 
73, Jim N7US




Re: Log window frequency precision

Dave Sumner
 



On Tuesday, July 24, 2018 10:56 PM, Jim N7US <jim@...> wrote:


Hi Dave,
 
That did it!!!  I had to restart N1MM+ to make it effective (I just guessed at that).
 
It’s really strange, as I had never been in those settings, and it used to work OK.  Maybe a Windows update?
 
I wonder if that change might affect something else.
 
I don’t know how you came up with the solution, but I’m glad you did.  Thanks!
 
73, Jim N7US
 
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of David Sumner
Sent: Tuesday, July 24, 2018 21:15
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision
 
Jim, this happened to me last year. The fix required going to Windows Settings and going through the following screens:
Time & Language
Region & Language
Additional date, time, & regional settings
Change date, time, or number formats
Additional settings
Number of digits after decimal (change from 0 to 2)
 
If you get to that last step and the number of digits after the decimal is shown as 2 already, your problem must be different.
 
Good luck!
 
73,
Dave K1ZZ
 
 
 
 


 
On Tuesday, July 24, 2018 9:13 PM, Jim N7US <jim@...> wrote:
 
Sorry, John, I forgot to mention that I did.  The problem isn’t caused by too narrow a column.
 
The frequency is being stored to two decimal places, but it’s being rounded to the nearest kHz in the display in the log window.  I can select the contact and chose the option to return the frequency, and it returns to the exact frequency, not the rounded one being displayed.
 
73, Jim N7US
 
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of John Bednar
Sent: Tuesday, July 24, 2018 19:54
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision
 
Jim,
 
Did you make the frequency column wider as Rich suggested?
 
You could also make the font smaller with the fontsizer.
 
John, K3CT
 
From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Jim N7US
Sent: Tuesday, July 24, 2018 6:56 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision
 
Second request.  Any ideas?  Thanks.
 
73, Jim N7US
 
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Jim N7US
Sent: Sunday, July 22, 2018 13:26
To: N1MM Reflector <n1mmloggerplus@groups.io>
Subject: [N1MMLoggerPlus] Log window frequency precision
 
At some point, I lost the decimal points in the frequency of the log window.  I’ve searched the documentation but haven’t found the way to change the precision displayed in the window.
 
73, Jim N7US


Receive Frequency

ShelbyK4WW
 

It's completely a matter of preference, but I would like to NOT have the receive frequency noted in the ADIF file, prior to loading into DX4WIN? I can understand the reasoning for a split operation, but not "same frequency" operation?

73, Shelby - K4WW
As I don't have an iPad nor iPhone, sent from my PC

Re: Log window frequency precision

Jim N7US
 

Hi Dave,

 

That did it!!!  I had to restart N1MM+ to make it effective (I just guessed at that).

 

It’s really strange, as I had never been in those settings, and it used to work OK.  Maybe a Windows update?

 

I wonder if that change might affect something else.

 

I don’t know how you came up with the solution, but I’m glad you did.  Thanks!

 

73, Jim N7US

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of David Sumner
Sent: Tuesday, July 24, 2018 21:15
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision

 

Jim, this happened to me last year. The fix required going to Windows Settings and going through the following screens:

Time & Language

Region & Language

Additional date, time, & regional settings

Change date, time, or number formats

Additional settings

Number of digits after decimal (change from 0 to 2)

 

If you get to that last step and the number of digits after the decimal is shown as 2 already, your problem must be different.

 

Good luck!

 

73,

Dave K1ZZ

 

 

 

 



 

On Tuesday, July 24, 2018 9:13 PM, Jim N7US <jim@...> wrote:

 

Sorry, John, I forgot to mention that I did.  The problem isn’t caused by too narrow a column.

 

The frequency is being stored to two decimal places, but it’s being rounded to the nearest kHz in the display in the log window.  I can select the contact and chose the option to return the frequency, and it returns to the exact frequency, not the rounded one being displayed.

 

73, Jim N7US

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of John Bednar
Sent: Tuesday, July 24, 2018 19:54
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision

 

Jim,

 

Did you make the frequency column wider as Rich suggested?

 

You could also make the font smaller with the fontsizer.

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Jim N7US
Sent: Tuesday, July 24, 2018 6:56 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision

 

Second request.  Any ideas?  Thanks.

 

73, Jim N7US

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Jim N7US
Sent: Sunday, July 22, 2018 13:26
To: N1MM Reflector <n1mmloggerplus@groups.io>
Subject: [N1MMLoggerPlus] Log window frequency precision

 

At some point, I lost the decimal points in the frequency of the log window.  I’ve searched the documentation but haven’t found the way to change the precision displayed in the window.

 

73, Jim N7US

Re: Log window frequency precision

Dave Sumner
 

Jim, this happened to me last year. The fix required going to Windows Settings and going through the following screens:
Time & Language
Region & Language
Additional date, time, & regional settings
Change date, time, or number formats
Additional settings
Number of digits after decimal (change from 0 to 2)

If you get to that last step and the number of digits after the decimal is shown as 2 already, your problem must be different.

Good luck!

73,
Dave K1ZZ







On Tuesday, July 24, 2018 9:13 PM, Jim N7US <jim@...> wrote:


Sorry, John, I forgot to mention that I did.  The problem isn’t caused by too narrow a column.
 
The frequency is being stored to two decimal places, but it’s being rounded to the nearest kHz in the display in the log window.  I can select the contact and chose the option to return the frequency, and it returns to the exact frequency, not the rounded one being displayed.
 
73, Jim N7US
 
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of John Bednar
Sent: Tuesday, July 24, 2018 19:54
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision
 
Jim,
 
Did you make the frequency column wider as Rich suggested?
 
You could also make the font smaller with the fontsizer.
 
John, K3CT
 
From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Jim N7US
Sent: Tuesday, July 24, 2018 6:56 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision
 
Second request.  Any ideas?  Thanks.
 
73, Jim N7US
 
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Jim N7US
Sent: Sunday, July 22, 2018 13:26
To: N1MM Reflector <n1mmloggerplus@groups.io>
Subject: [N1MMLoggerPlus] Log window frequency precision
 
At some point, I lost the decimal points in the frequency of the log window.  I’ve searched the documentation but haven’t found the way to change the precision displayed in the window.
 
73, Jim N7US


Re: Log window frequency precision

Jim N7US
 

Sorry, John, I forgot to mention that I did.  The problem isn’t caused by too narrow a column.

 

The frequency is being stored to two decimal places, but it’s being rounded to the nearest kHz in the display in the log window.  I can select the contact and chose the option to return the frequency, and it returns to the exact frequency, not the rounded one being displayed.

 

73, Jim N7US

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of John Bednar
Sent: Tuesday, July 24, 2018 19:54
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision

 

Jim,

 

Did you make the frequency column wider as Rich suggested?

 

You could also make the font smaller with the fontsizer.

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Jim N7US
Sent: Tuesday, July 24, 2018 6:56 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision

 

Second request.  Any ideas?  Thanks.

 

73, Jim N7US

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Jim N7US
Sent: Sunday, July 22, 2018 13:26
To: N1MM Reflector <n1mmloggerplus@groups.io>
Subject: [N1MMLoggerPlus] Log window frequency precision

 

At some point, I lost the decimal points in the frequency of the log window.  I’ve searched the documentation but haven’t found the way to change the precision displayed in the window.

 

73, Jim N7US

Re: Log window frequency precision

John Bednar
 

Jim,

 

Did you make the frequency column wider as Rich suggested?

 

You could also make the font smaller with the fontsizer.

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Jim N7US
Sent: Tuesday, July 24, 2018 6:56 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Log window frequency precision

 

Second request.  Any ideas?  Thanks.

 

73, Jim N7US

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Jim N7US
Sent: Sunday, July 22, 2018 13:26
To: N1MM Reflector <n1mmloggerplus@groups.io>
Subject: [N1MMLoggerPlus] Log window frequency precision

 

At some point, I lost the decimal points in the frequency of the log window.  I’ve searched the documentation but haven’t found the way to change the precision displayed in the window.

 

73, Jim N7US

Re: MMTTY with N1MM COM port issues and strange COM port numbers

Rick Ellison
 

Dennis.

I’m not familiar with the new ICOM rig settings. I will be in about a week. When it arrives. But I would guess that you need to turn on RTTY keying as EXTFSK or EXTFSK64 are requiring you to set the comport that you want it to key. Since right now you do not have anything set MMTTY has nothing to set…

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of denny.allen@...
Sent: Tuesday, July 24, 2018 7:56 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] MMTTY with N1MM COM port issues and strange COM port numbers

 

I chose to try the easy route and just reassigned the COM72 and 73 to COM11 and 12 from within Device Manager advanced settings. HRD and N1MM seem fine with these settings but I still can’t get MMTTY to key from within N1MM. I will try MMTTY by itself next. At least N1MM works fine on CW, which is my primary use. 

Dennis WA5LXS 

Re: MMTTY with N1MM COM port issues and strange COM port numbers

WA5LXS
 

I chose to try the easy route and just reassigned the COM72 and 73 to COM11 and 12 from within Device Manager advanced settings. HRD and N1MM seem fine with these settings but I still can’t get MMTTY to key from within N1MM. I will try MMTTY by itself next. At least N1MM works fine on CW, which is my primary use. 

Dennis WA5LXS 

DI window bug - radio 2 clears window 1

Jeff AC0C
 

There seems to be a bug related to the option "QSY will clear grab window and main rx window always."

When this option is checked, this is the behavior:

QSY on radio 1 - clears grab 1 and rx window 1 (correct)

QSY on radio 2 - clears grab 1 and rx window 1 (bug in clearing wrong window)

73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com