Date   
Re: QSK

Tom Fitzpatrick <k4ie_tom@...>
 

It's set to PTT


Tom, K4IE


On Thursday, February 22, 2018, 8:58:56 PM EST, Gary Hunt kc9ee@... [N1MMLoggerplus] <N1MMLoggerplus@...> wrote:


 

In N1MM+ under Config, Winkey, what is Pin 5 function set to?

Gary KC9EE


From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: "Gary Hunt kc9ee@... [N1MMLoggerplus]"
Sent: Thursday, February 22, 2018 6:50 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
Acltually, no. I'm also using WinKey and it works great. My settings seem to be right, but still no QSK.


Tom, K4IE


On Thursday, February 22, 2018, 6:03:27 PM EST, Gary Hunt kc9ee@... [N1MMLoggerplus] wrote:


 


I actually went several years keying direct with the K3 and it never consistantly didn't work. It's just that errant behavior would rare it's head at the worst possible time. After I finally got a grasp on what was happening and why, it's difficult for me to understand how it works as consistantly as it does. The WinKey has been flawless and really invisible once set up. I think I'm just running way too much stuff for direct to ever work here again.


 Did Tom ever get squared up on his QSK issue?

73,

Gary KC9EE




From: "Gerry Treas k8qlk@yahoo..com [N1MMLoggerplus]" <N1MMLoggerplus@...>
To: "ve3iay@... [N1MMLoggerplus]"
Sent: Thursday, February 22, 2018 4:30 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
I have been direct keying for about 10 years also and it has worked great most of the time.  Bute to the large number of incoming Telnet spots even filtered and throttled down, I have recently incurred keying delays with a 6th generation i7 3..4GHz 16GB memory and a separate video card with its own memory.

I now have a Winkey3 USB and it is great! 


73, Gerry K8GT


On Thursday, February 22, 2018, 4:52:48 PM EST, ve3iay@... [N1MMLoggerplus] wrote:


 
Who knows? It might happen at the next Windows update, or it might never be a problem. The important take-away is that it is unpredictable; every installation is different.

73,
Rich VE3KI


---In N1MMLoggerplus@..., wrote :

I have been keying direct for a little over 10 years, how much longer do you guess I have to wait???????

73,
Tom – W4BQF
 
 
Sent from Mail for Windows 10
 
From: Gary Hunt kc9ee@... [N1MMLoggerplus]
Sent: Thursday, February 22, 2018 11:37 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] QSK
 
 
In N1MM+ I'm using a virtual Com Port for the K3 (Pair Com22,Com23)for CAT. That's running through Win4K3Suite. I have WinKey on Comport 10, check mark in CW/other. DTR always on, RTS always off for ComPort10. WinKey through N1MM+ keys the rig as smooth as a key. The K3 will key directly, contrary to urban myth, however it is problematic. Anyone keying directly and not having a problem just hasn't had a problem YET.
 
73,
Gary KC9EE
 
 
From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: n1mmloggerplus@...
Sent: Thursday, February 22, 2018 9:27 AM
Subject: [N1MMLoggerplus] QSK
 
 
     How do I set up N1MM+ for QSK? I'm running a K3.
 
 




Re: NC/SC qso party support

Chris Plumblee
 

I don’t think they run simultaneously. SC is Saturday and NC is Sunday if my memory is to be trusted. No need to log simultaneously. 

73,
Chris WF3C 
Former North Carolinian 


On Fri, Feb 23, 2018 at 6:25 AM 'John Bednar' k3ct@... [N1MMLoggerplus] <N1MMLoggerplus@...> wrote:
 

Bill,

 

No. I remember looking into it but do not remember what the limitation was. It could have been that both sponsors did answer an email indicating that they would accept county abbreviations from the other QSO party and rescore logs.

 

John, K3CT

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, February 23, 2018 2:10 AM
To: N1MMLoggerplus@...
Subject: [N1MMLoggerplus] NC/SC qso party support

 

 

Any combo setting for simultaneous logging for both contests? 

Bill K0VBU

Bill Henderson, Associate Broker
Platinum Realty
9393 W 110th St., Suite 170
Overland Park, KS 66210
(913) 908-6906

--
Chris Plumblee
407.494.5155

Re: NC/SC qso party support

John Bednar
 

Bill,

 

No. I remember looking into it but do not remember what the limitation was. It could have been that both sponsors did answer an email indicating that they would accept county abbreviations from the other QSO party and rescore logs.

 

John, K3CT

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, February 23, 2018 2:10 AM
To: N1MMLoggerplus@...
Subject: [N1MMLoggerplus] NC/SC qso party support

 

 

Any combo setting for simultaneous logging for both contests? 

Bill K0VBU

Bill Henderson, Associate Broker
Platinum Realty
9393 W 110th St., Suite 170
Overland Park, KS 66210
(913) 908-6906

NC/SC qso party support

Bill Henderson
 

Any combo setting for simultaneous logging for both contests? 
Bill K0VBU

Bill Henderson, Associate Broker
Platinum Realty
9393 W 110th St., Suite 170
Overland Park, KS 66210
(913) 908-6906

Re: ESM

Sam Rubin <srubn@...>
 

I would also do the same for s&p F5 to make it consistent .


On Feb 22, 2018, at 5:35 PM, 'Larry (K8UT)' k8ut@... [N1MMLoggerplus] <N1MMLoggerplus@...> wrote:

 

Looks like the problem is your Run F5 definition - which gets concatenated with F2 as part of the exchange when in ESM mode. 

-larry (K8UT)

------ Original Message ------
From: "ai6o@... [N1MMLoggerplus]" <N1MMLoggerplus@...>
Sent: 2018-02-22 20:29:03
Subject: Re: [N1MMLoggerplus] ESM

 

Claude,


Here's a copy of the Function key setup I'm using:

 

   #
###################
#   RUN Messages
###################
F1 CQ, CQ {MYCALL} {MYCALL} cwt
F2 EXCH, {EXCH}
F3 TU, TU {MYCALL}
F4 {MYCALL}, {MYCALL}
F5 PARTIAL, !?
F6 {EXCH}, {EXCH}
F7 NR?, NR?
F8
F9
F10 CALL?, CL?
F11 WRK B4, B4 TU
F12 ??, ?
###################
#   S&P Messages
#################
F1 Qrl?, qrl?
F2 {EXCH}, {EXCH}
F3 AGAIN, AGN?
F4 {MYCALL}, {MYCALL}
F5 NBR?, NBR?
F6 EXCHANGE, {EXCH}
F7 NAME?, NAME?
F8 SAVE,
F9
F10 PARTIAL, CALL?
F11
F12 ??, ?


Hope this helps.  Thanks in advance.


Ed, AI6O

Re: ESM

Edwin Felter
 

I understand and agree, Claude.  I probably was getting too fancy--HEE.  Hey, thanks for the fine Call History files.  Much appreciated.  I just started using N1MM+ about 3 months ago and I don't know how I did any contesting (mostly part-time) before.  As we used to say down in Virginia, I'm in hog heaven!!  73


Ed, Ai6O

Re: ESM

VE2FK
 

Ed, you still can use this key for what you wanted, but without the ?
You have VE2 inserted in the call box... you want the guy to repeat... use F5 it
will send VE2� and the guy will repeat VE2FK hi.

73


Le 2018-02-22 � 21:30, ai6o@... [N1MMLoggerplus] a �crit�:

�

John and Claude,


That fixed it.� Thanks.� Didn't think that F2 was "reading" F5.� I'm sure you know what I was trying to do--when you get a�partial, send what you have and end with a question mark.�


I do understand that with the pgm all you need to do is fix the call and it will go back and correct the call upon your F3 (TU) response.� This is a great feature.


As always, the Help is terrific in this group.� Thanks again!

Ed, AI6O

Aucun virus trouv� dans ce message.
Analyse effectu�e par AVG - www.avg.fr
Version: 2016.0.7226 / Base de donn�es virale: 4793/15424 - Date: 22/02/2018


Re: ESM

Edwin Felter
 

John and Claude,


That fixed it.  Thanks.  Didn't think that F2 was "reading" F5.  I'm sure you know what I was trying to do--when you get a partial, send what you have and end with a question mark. 


I do understand that with the pgm all you need to do is fix the call and it will go back and correct the call upon your F3 (TU) response.  This is a great feature.


As always, the Help is terrific in this group.  Thanks again!

Ed, AI6O

Re: QSK

kc9ee
 

Never mind last question. That didn't change mine.

Gary KC9EE



From: "Gary Hunt kc9ee@... [N1MMLoggerplus]"
To: "N1MMLoggerplus@..."
Sent: Thursday, February 22, 2018 7:58 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
In N1MM+ under Config, Winkey, what is Pin 5 function set to?

Gary KC9EE


From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: "Gary Hunt kc9ee@... [N1MMLoggerplus]"
Sent: Thursday, February 22, 2018 6:50 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
Acltually, no. I'm also using WinKey and it works great. My settings seem to be right, but still no QSK.


Tom, K4IE


On Thursday, February 22, 2018, 6:03:27 PM EST, Gary Hunt kc9ee@... [N1MMLoggerplus] <N1MMLoggerplus@...> wrote:


 


I actually went several years keying direct with the K3 and it never consistantly didn't work. It's just that errant behavior would rare it's head at the worst possible time. After I finally got a grasp on what was happening and why, it's difficult for me to understand how it works as consistantly as it does. The WinKey has been flawless and really invisible once set up. I think I'm just running way too much stuff for direct to ever work here again.


 Did Tom ever get squared up on his QSK issue?

73,

Gary KC9EE




From: "Gerry Treas k8qlk@yahoo..com [N1MMLoggerplus]"
To: "ve3iay@... [N1MMLoggerplus]"
Sent: Thursday, February 22, 2018 4:30 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
I have been direct keying for about 10 years also and it has worked great most of the time.  Bute to the large number of incoming Telnet spots even filtered and throttled down, I have recently incurred keying delays with a 6th generation i7 3..4GHz 16GB memory and a separate video card with its own memory.

I now have a Winkey3 USB and it is great! 


73, Gerry K8GT


On Thursday, February 22, 2018, 4:52:48 PM EST, ve3iay@... [N1MMLoggerplus] wrote:


 
Who knows? It might happen at the next Windows update, or it might never be a problem. The important take-away is that it is unpredictable; every installation is different.

73,
Rich VE3KI


---In N1MMLoggerplus@...,
I have been keying direct for a little over 10 years, how much longer do you guess I have to wait???????

73,
Tom – W4BQF
 
 
Sent from Mail for Windows 10
 
From: Gary Hunt kc9ee@... [N1MMLoggerplus]
Sent: Thursday, February 22, 2018 11:37 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] QSK
 
 
In N1MM+ I'm using a virtual Com Port for the K3 (Pair Com22,Com23)for CAT. That's running through Win4K3Suite. I have WinKey on Comport 10, check mark in CW/other. DTR always on, RTS always off for ComPort10. WinKey through N1MM+ keys the rig as smooth as a key. The K3 will key directly, contrary to urban myth, however it is problematic. Anyone keying directly and not having a problem just hasn't had a problem YET.
 
73,
Gary KC9EE
 
 
From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: n1mmloggerplus@...
Sent: Thursday, February 22, 2018 9:27 AM
Subject: [N1MMLoggerplus] QSK
 
 
     How do I set up N1MM+ for QSK? I'm running a K3.
 
 






Re: QSK

kc9ee
 

In N1MM+ under Config, Winkey, what is Pin 5 function set to?

Gary KC9EE


From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: "Gary Hunt kc9ee@... [N1MMLoggerplus]"
Sent: Thursday, February 22, 2018 6:50 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
Acltually, no. I'm also using WinKey and it works great. My settings seem to be right, but still no QSK.


Tom, K4IE


On Thursday, February 22, 2018, 6:03:27 PM EST, Gary Hunt kc9ee@... [N1MMLoggerplus] wrote:


 


I actually went several years keying direct with the K3 and it never consistantly didn't work. It's just that errant behavior would rare it's head at the worst possible time. After I finally got a grasp on what was happening and why, it's difficult for me to understand how it works as consistantly as it does. The WinKey has been flawless and really invisible once set up. I think I'm just running way too much stuff for direct to ever work here again.


 Did Tom ever get squared up on his QSK issue?

73,

Gary KC9EE




From: "Gerry Treas k8qlk@yahoo..com [N1MMLoggerplus]" <N1MMLoggerplus@...>
To: "ve3iay@... [N1MMLoggerplus]"
Sent: Thursday, February 22, 2018 4:30 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
I have been direct keying for about 10 years also and it has worked great most of the time.  Bute to the large number of incoming Telnet spots even filtered and throttled down, I have recently incurred keying delays with a 6th generation i7 3.4GHz 16GB memory and a separate video card with its own memory.

I now have a Winkey3 USB and it is great! 


73, Gerry K8GT


On Thursday, February 22, 2018, 4:52:48 PM EST, ve3iay@... [N1MMLoggerplus] wrote:


 
Who knows? It might happen at the next Windows update, or it might never be a problem. The important take-away is that it is unpredictable; every installation is different.

73,
Rich VE3KI


---In N1MMLoggerplus@..., wrote :

I have been keying direct for a little over 10 years, how much longer do you guess I have to wait???????

73,
Tom – W4BQF
 
 
Sent from Mail for Windows 10
 
From: Gary Hunt kc9ee@... [N1MMLoggerplus]
Sent: Thursday, February 22, 2018 11:37 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] QSK
 
 
In N1MM+ I'm using a virtual Com Port for the K3 (Pair Com22,Com23)for CAT. That's running through Win4K3Suite. I have WinKey on Comport 10, check mark in CW/other. DTR always on, RTS always off for ComPort10. WinKey through N1MM+ keys the rig as smooth as a key. The K3 will key directly, contrary to urban myth, however it is problematic. Anyone keying directly and not having a problem just hasn't had a problem YET.
 
73,
Gary KC9EE
 
 
From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: n1mmloggerplus@...
Sent: Thursday, February 22, 2018 9:27 AM
Subject: [N1MMLoggerplus] QSK
 
 
     How do I set up N1MM+ for QSK? I'm running a K3.
 
 




Re: QSK

Joe WB9SBD
 

What is also nice about using a Winkey,

It does the PTT for you no matter what mode you are running, CW, SSB, PSK-31, RTTY, Hell, doesn't matter!

Joe WB9SBD

The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com

On 2/22/2018 4:30 PM, Gerry Treas k8qlk@... [N1MMLoggerplus] wrote:
I have been direct keying for about 10 years also and it has worked great most of the time.  Bute to the large number of incoming Telnet spots even filtered and throttled down, I have recently incurred keying delays with a 6th generation i7 3.4GHz 16GB memory and a separate video card with its own memory.

I now have a Winkey3 USB and it is great! 


73, Gerry K8GT


On Thursday, February 22, 2018, 4:52:48 PM EST, ve3iay@... [N1MMLoggerplus] wrote:


 

Who knows? It might happen at the next Windows update, or it might never be a problem. The important take-away is that it is unpredictable; every installation is different.


73,
Rich VE3KI


---In N1MMLoggerplus@..., wrote :

I have been keying direct for a little over 10 years, how much longer do you guess I have to wait???????

73,

Tom – W4BQF

 

 

Sent from Mail for Windows 10

 

From: Gary Hunt kc9ee@... [N1MMLoggerplus]
Sent: Thursday, February 22, 2018 11:37 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] QSK

 

 

In N1MM+ I'm using a virtual Com Port for the K3 (Pair Com22,Com23)for CAT. That's running through Win4K3Suite. I have WinKey on Comport 10, check mark in CW/other. DTR always on, RTS always off for ComPort10. WinKey through N1MM+ keys the rig as smooth as a key. The K3 will key directly, contrary to urban myth, however it is problematic. Anyone keying directly and not having a problem just hasn't had a problem YET.

 

73,

Gary KC9EE

 

 

From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: n1mmloggerplus@...
Sent: Thursday, February 22, 2018 9:27 AM
Subject: [N1MMLoggerplus] QSK

 

 

     How do I set up N1MM+ for QSK? I'm running a K3.

 

 


Re: ESM

John Bednar
 

Your Run F5 message sends the callsign followed by ?

F5 PARTIAL, !?

The program default for "His Call" key is F5.

John, K3CT


From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Thursday, February 22, 2018 8:29 PM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] ESM


Claude,

Here's a copy of the Function key setup I'm using:

#
###################
# RUN Messages
###################
F1 CQ, CQ {MYCALL} {MYCALL} cwt
F2 EXCH, {EXCH}
F3 TU, TU {MYCALL}
F4 {MYCALL}, {MYCALL}
F5 PARTIAL, !?
F6 {EXCH}, {EXCH}
F7 NR?, NR?
F8
F9
F10 CALL?, CL?
F11 WRK B4, B4 TU
F12 ??, ?
###################
# S&P Messages
#################
F1 Qrl?, qrl?
F2 {EXCH}, {EXCH}
F3 AGAIN, AGN?
F4 {MYCALL}, {MYCALL}
F5 NBR?, NBR?
F6 EXCHANGE, {EXCH}
F7 NAME?, NAME?
F8 SAVE,
F9
F10 PARTIAL, CALL?
F11
F12 ??, ?

Hope this helps. Thanks in advance.

Ed, AI6O

Re: ESM

Larry K8UT
 

Looks like the problem is your Run F5 definition - which gets concatenated with F2 as part of the exchange when in ESM mode. 

-larry (K8UT)

------ Original Message ------
From: "ai6o@... [N1MMLoggerplus]" <N1MMLoggerplus@...>
Sent: 2018-02-22 20:29:03
Subject: Re: [N1MMLoggerplus] ESM

 

Claude,


Here's a copy of the Function key setup I'm using:

 

   #
###################
#   RUN Messages
###################
F1 CQ, CQ {MYCALL} {MYCALL} cwt
F2 EXCH, {EXCH}
F3 TU, TU {MYCALL}
F4 {MYCALL}, {MYCALL}
F5 PARTIAL, !?
F6 {EXCH}, {EXCH}
F7 NR?, NR?
F8
F9
F10 CALL?, CL?
F11 WRK B4, B4 TU
F12 ??, ?
###################
#   S&P Messages
#################
F1 Qrl?, qrl?
F2 {EXCH}, {EXCH}
F3 AGAIN, AGN?
F4 {MYCALL}, {MYCALL}
F5 NBR?, NBR?
F6 EXCHANGE, {EXCH}
F7 NAME?, NAME?
F8 SAVE,
F9
F10 PARTIAL, CALL?
F11
F12 ??, ?


Hope this helps.  Thanks in advance.


Ed, AI6O

Re: ESM

VE2FK
 

Hi Ed.
In your RUN messages in F5� look at the end of line, there is a ?
Edit, remove it and all will be ok.

73, Claude VE2FK


Le 2018-02-22 � 20:29, ai6o@... [N1MMLoggerplus] a �crit�:

�

Claude,


Here's a copy of the Function key setup I'm using:

�

�� #
###################
#�� RUN Messages
###################
F1 CQ, CQ {MYCALL} {MYCALL} cwt
F2 EXCH, {EXCH}
F3 TU, TU {MYCALL}
F4 {MYCALL}, {MYCALL}
F5 PARTIAL, !?
F6 {EXCH}, {EXCH}
F7 NR?, NR?
F8
F9
F10 CALL?, CL?
F11 WRK B4, B4 TU
F12 ??, ?
###################
#�� S&P Messages
#################
F1 Qrl?, qrl?
F2 {EXCH}, {EXCH}
F3 AGAIN, AGN?
F4 {MYCALL}, {MYCALL}
F5 NBR?, NBR?
F6 EXCHANGE, {EXCH}
F7 NAME?, NAME?
F8 SAVE,
F9
F10 PARTIAL, CALL?
F11
F12 ??, ?


Hope this helps.� Thanks in advance.


Ed, AI6O

Aucun virus trouv� dans ce message.
Analyse effectu�e par AVG - www.avg.fr
Version: 2016.0.7226 / Base de donn�es virale: 4793/15424 - Date: 22/02/2018


Re: ESM

Edwin Felter
 

Thanks, John.  I found the box in Configurer and it had and does have just a SPACE.  Nothing else.


Ed, Ai6O

Re: ESM

Edwin Felter
 

Claude,


Here's a copy of the Function key setup I'm using:

 

   #
###################
#   RUN Messages
###################
F1 CQ, CQ {MYCALL} {MYCALL} cwt
F2 EXCH, {EXCH}
F3 TU, TU {MYCALL}
F4 {MYCALL}, {MYCALL}
F5 PARTIAL, !?
F6 {EXCH}, {EXCH}
F7 NR?, NR?
F8
F9
F10 CALL?, CL?
F11 WRK B4, B4 TU
F12 ??, ?
###################
#   S&P Messages
#################
F1 Qrl?, qrl?
F2 {EXCH}, {EXCH}
F3 AGAIN, AGN?
F4 {MYCALL}, {MYCALL}
F5 NBR?, NBR?
F6 EXCHANGE, {EXCH}
F7 NAME?, NAME?
F8 SAVE,
F9
F10 PARTIAL, CALL?
F11
F12 ??, ?


Hope this helps.  Thanks in advance.


Ed, AI6O

Re: QSK

Tom Fitzpatrick <k4ie_tom@...>
 

Acltually, no. I'm also using WinKey and it works great. My settings seem to be right, but still no QSK.


Tom, K4IE


On Thursday, February 22, 2018, 6:03:27 PM EST, Gary Hunt kc9ee@... [N1MMLoggerplus] wrote:


 



I actually went several years keying direct with the K3 and it never consistantly didn't work. It's just that errant behavior would rare it's head at the worst possible time. After I finally got a grasp on what was happening and why, it's difficult for me to understand how it works as consistantly as it does. The WinKey has been flawless and really invisible once set up. I think I'm just running way too much stuff for direct to ever work here again.


 Did Tom ever get squared up on his QSK issue?

73,

Gary KC9EE




From: "Gerry Treas k8qlk@... [N1MMLoggerplus]"
To: "ve3iay@... [N1MMLoggerplus]"
Sent: Thursday, February 22, 2018 4:30 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
I have been direct keying for about 10 years also and it has worked great most of the time.  Bute to the large number of incoming Telnet spots even filtered and throttled down, I have recently incurred keying delays with a 6th generation i7 3.4GHz 16GB memory and a separate video card with its own memory.

I now have a Winkey3 USB and it is great! 


73, Gerry K8GT


On Thursday, February 22, 2018, 4:52:48 PM EST, ve3iay@... [N1MMLoggerplus] wrote:


 
Who knows? It might happen at the next Windows update, or it might never be a problem. The important take-away is that it is unpredictable; every installation is different.

73,
Rich VE3KI


---In N1MMLoggerplus@..., wrote :

I have been keying direct for a little over 10 years, how much longer do you guess I have to wait???????

73,
Tom – W4BQF
 
 
Sent from Mail for Windows 10
 
From: Gary Hunt kc9ee@... [N1MMLoggerplus]
Sent: Thursday, February 22, 2018 11:37 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] QSK
 
 
In N1MM+ I'm using a virtual Com Port for the K3 (Pair Com22,Com23)for CAT. That's running through Win4K3Suite. I have WinKey on Comport 10, check mark in CW/other. DTR always on, RTS always off for ComPort10. WinKey through N1MM+ keys the rig as smooth as a key. The K3 will key directly, contrary to urban myth, however it is problematic. Anyone keying directly and not having a problem just hasn't had a problem YET.
 
73,
Gary KC9EE
 
 
From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: n1mmloggerplus@...
Sent: Thursday, February 22, 2018 9:27 AM
Subject: [N1MMLoggerplus] QSK
 
 
     How do I set up N1MM+ for QSK? I'm running a K3.
 
 


Re: QSK

kc9ee
 



I actually went several years keying direct with the K3 and it never consistantly didn't work. It's just that errant behavior would rare it's head at the worst possible time. After I finally got a grasp on what was happening and why, it's difficult for me to understand how it works as consistantly as it does. The WinKey has been flawless and really invisible once set up. I think I'm just running way too much stuff for direct to ever work here again.


 Did Tom ever get squared up on his QSK issue?

73,

Gary KC9EE




From: "Gerry Treas k8qlk@... [N1MMLoggerplus]"
To: "ve3iay@... [N1MMLoggerplus]"
Sent: Thursday, February 22, 2018 4:30 PM
Subject: Re: RE: [N1MMLoggerplus] QSK

 
I have been direct keying for about 10 years also and it has worked great most of the time.  Bute to the large number of incoming Telnet spots even filtered and throttled down, I have recently incurred keying delays with a 6th generation i7 3.4GHz 16GB memory and a separate video card with its own memory.

I now have a Winkey3 USB and it is great! 


73, Gerry K8GT


On Thursday, February 22, 2018, 4:52:48 PM EST, ve3iay@... [N1MMLoggerplus] wrote:


 
Who knows? It might happen at the next Windows update, or it might never be a problem. The important take-away is that it is unpredictable; every installation is different.

73,
Rich VE3KI


---In N1MMLoggerplus@..., wrote :

I have been keying direct for a little over 10 years, how much longer do you guess I have to wait???????

73,
Tom – W4BQF
 
 
Sent from Mail for Windows 10
 
From: Gary Hunt kc9ee@... [N1MMLoggerplus]
Sent: Thursday, February 22, 2018 11:37 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] QSK
 
 
In N1MM+ I'm using a virtual Com Port for the K3 (Pair Com22,Com23)for CAT. That's running through Win4K3Suite. I have WinKey on Comport 10, check mark in CW/other. DTR always on, RTS always off for ComPort10. WinKey through N1MM+ keys the rig as smooth as a key. The K3 will key directly, contrary to urban myth, however it is problematic. Anyone keying directly and not having a problem just hasn't had a problem YET.
 
73,
Gary KC9EE
 
 
From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: n1mmloggerplus@...
Sent: Thursday, February 22, 2018 9:27 AM
Subject: [N1MMLoggerplus] QSK
 
 
     How do I set up N1MM+ for QSK? I'm running a K3.
 
 


Re: QSK

kc9ee
 

OK, you're right, I'm wrong. My apologies. Have fun.

73,

Gary KC9EE




From: "Tom aldermant@... [N1MMLoggerplus]"
To: "N1MMLoggerplus@..."
Sent: Thursday, February 22, 2018 3:08 PM
Subject: RE: [N1MMLoggerplus] QSK

 
I have been keying direct for a little over 10 years, how much longer do you guess I have to wait???????

73,
Tom – W4BQF
 
 
Sent from Mail for Windows 10
 
From: Gary Hunt kc9ee@... [N1MMLoggerplus]
Sent: Thursday, February 22, 2018 11:37 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] QSK
 
 
In N1MM+ I'm using a virtual Com Port for the K3 (Pair Com22,Com23)for CAT. That's running through Win4K3Suite. I have WinKey on Comport 10, check mark in CW/other. DTR always on, RTS always off for ComPort10. WinKey through N1MM+ keys the rig as smooth as a key. The K3 will key directly, contrary to urban myth, however it is problematic. Anyone keying directly and not having a problem just hasn't had a problem YET.
 
73,
Gary KC9EE
 
 
From: "Tom Fitzpatrick k4ie_tom@yahoo..com [N1MMLoggerplus]"
To: n1mmloggerplus@...
Sent: Thursday, February 22, 2018 9:27 AM
Subject: [N1MMLoggerplus] QSK
 
 
     How do I set up N1MM+ for QSK? I'm running a K3.
 
 


Re: QSK

Gerry Treas
 

I have been direct keying for about 10 years also and it has worked great most of the time.  Bute to the large number of incoming Telnet spots even filtered and throttled down, I have recently incurred keying delays with a 6th generation i7 3.4GHz 16GB memory and a separate video card with its own memory.

I now have a Winkey3 USB and it is great! 


73, Gerry K8GT


On Thursday, February 22, 2018, 4:52:48 PM EST, ve3iay@... [N1MMLoggerplus] wrote:


 

Who knows? It might happen at the next Windows update, or it might never be a problem. The important take-away is that it is unpredictable; every installation is different.


73,
Rich VE3KI


---In N1MMLoggerplus@..., wrote :

I have been keying direct for a little over 10 years, how much longer do you guess I have to wait???????

73,

Tom – W4BQF

 

 

Sent from Mail for Windows 10

 

From: Gary Hunt kc9ee@... [N1MMLoggerplus]
Sent: Thursday, February 22, 2018 11:37 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] QSK

 

 

In N1MM+ I'm using a virtual Com Port for the K3 (Pair Com22,Com23)for CAT. That's running through Win4K3Suite. I have WinKey on Comport 10, check mark in CW/other. DTR always on, RTS always off for ComPort10. WinKey through N1MM+ keys the rig as smooth as a key. The K3 will key directly, contrary to urban myth, however it is problematic. Anyone keying directly and not having a problem just hasn't had a problem YET.

 

73,

Gary KC9EE

 

 

From: "Tom Fitzpatrick k4ie_tom@... [N1MMLoggerplus]"
To: n1mmloggerplus@...
Sent: Thursday, February 22, 2018 9:27 AM
Subject: [N1MMLoggerplus] QSK

 

 

     How do I set up N1MM+ for QSK? I'm running a K3.