Date   
Funny - sometimes ...

PeterK <pkspandau@...>
 

Hi,

SARTG - I just found some challenges and reported them.

10minutes later some of this reports are not valid anymore - it is somehow interesting, why sometimes something is not working and the other way round.

Therefore: How can I close an Bug Report by my own - e.g. I did a misconfiguration and did not see it?

Maybe a number for each Bug or FR is needed and I can close, update or ... this only if I am the creator?

That will be a good way not to start a lot of feedback/discusson from/to Developement or?

Greetings Peter

Re: RTTY Offset with 2tone

Rick Ellison <n2amg@...>
 

Turn on AutoTRX Offset…

73 Rick n2AMG

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 9:34 PM
To: N1MMLoggerplus@...
Subject: [N1MMLoggerplus] RTTY Offset with 2tone

 

 

How do i get the offset correct band map is still showing high compared to the radio when using 2tone?

Thanks, Paul - NN4F




This email is free from viruses and malware because avast! Antivirus protection is active.


Re: NS Sprint: 18.3368

Ted Bryant
 

I used 18.3368 in last night’s NS Sprint without any problems.  SO2R with Orion II and K3.

 

73, Ted W4NZ

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 8:12 PM
To: N1MMLoggerplus@...
Subject: RE: [N1MMLoggerplus] Re: NS Sprint: 18.3368

 

 

This is a week old build (3252). Many changes in that area since then, it’s not worth looking into this, unless you can you repro this on today’s build. Can you try? 

 

Thanks

Andy

KU7T

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 4:18 PM
To: N1MMLoggerplus@...
Subject: [N1MMLoggerplus] Re: NS Sprint: 18.3368

 

 

Its a fairly short file. The contest ran from 0230 to 0300z, so I think the problem was around 0245z.

 Thread # 1 @ 2014-08-06 23:19:23.953 PM - N1MMLogger.net - Version 0.18.3252.0

Built: 8/6/2014 5:02:42 AM

Error occurred at: 8/6/2014 5:19:23 PM in Thread: 

System.NullReferenceException: Object reference not set to an instance of an object.

   at N1MMLogger.Net.MSAccessConversionClass.MigrateDXLogTables() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\MSAccessConversion.vb:line 90

   at N1MMLogger.Net.MSAccessConversionClass.MigrateAllTablesFromMdbFile(String mdbFilePath, Boolean IsSkipAdmin) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\MSAccessConversion.vb:line 82

   at N1MMLogger.Net.EntryWindow.TryCreateNewDxLogDb(Boolean forced) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 15300

Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)

   at System.Environment.get_StackTrace()

   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 54

   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200

   at N1MMLogger.Net.EntryWindow.TryCreateNewDxLogDb(Boolean forced) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 15328

   at N1MMLogger.Net.EntryWindow.InitializeSingletonClasses() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 931

   at N1MMLogger.Net.EntryWindow..ctor() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 359

   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)

   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)

   at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)

   at System.Activator.CreateInstance[T]()

   at N1MMLogger.Net.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 187

   at N1MMLogger.Net.My.MyApplication.OnCreateMainForm() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\My Project\Application.Designer.vb:line 53

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)

   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82

 Thread # 51 @ 2014-08-07 02:41:36.682 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known

   at System.Net.Dns.GetAddrInfo(String name)

   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)

   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)

   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77

 Thread # 56 @ 2014-08-07 02:43:32.294 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known

   at System.Net.Dns.GetAddrInfo(String name)

   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)

   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)

   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77

 Thread # 58 @ 2014-08-07 02:45:45.814 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known

   at System.Net.Dns.GetAddrInfo(String name)

   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)

   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)

   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77

 Thread # 1 @ 2014-08-07 02:59:36.976 AM - SSB Message Error: File not found. 

2014-08-07 02:59:36.978 AM - Correct Configurer, Letters File Path, add a comma between wav files or remove the unexpected macro from the function key.

 Port: True Thread # 1 @ 2014-08-07 02:59:36.980 AM - Operator, station call - N0TA

2014-08-07 02:59:36.982 AM - User programmable Letters File Path - {Operator}\

2014-08-07 02:59:36.984 AM - Parsed Letters Path - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\LettersFiles\N0TA\

2014-08-07 02:59:36.986 AM - Unparsed function key string - N0TA\MYCALL.WAV

2014-08-07 02:59:36.988 AM - Parsed function key string - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV

2014-08-07 02:59:36.991 AM - Can't find this file - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV

 Thread # 1 @ 2014-08-07 02:59:38.390 AM - SSB Message Error: File not found. 

2014-08-07 02:59:38.394 AM - Correct Configurer, Letters File Path, add a comma between wav files or remove the unexpected macro from the function key.

 Port: True Thread # 1 @ 2014-08-07 02:59:38.398 AM - Operator, station call - N0TA

2014-08-07 02:59:38.401 AM - User programmable Letters File Path - {Operator}\

2014-08-07 02:59:38.404 AM - Parsed Letters Path - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\LettersFiles\N0TA\

2014-08-07 02:59:38.406 AM - Unparsed function key string - N0TA\MYCALL.WAV

2014-08-07 02:59:38.409 AM - Parsed function key string - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV

2014-08-07 02:59:43.000 AM - Can't find this file - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV

 Thread # 1 @ 2014-08-10 13:22:28.802 PM - N1MMLogger.net - Version 0.18.328.0

Built: 8/9/2014 6:46:18 AM

SQLString = Replace into dxlog (TS, Call, Freq, QSXFreq, Mode, ContestName, SNT, RCV, CountryPrefix, StationPrefix, QTH, Name, Comment, Nr, Sect, Prec, CK, ZN, SentNr, Points, IsMultiplier1, Ismultiplier2, Ismultiplier3, Power, Band, WPXPrefix, Exchange1, RadioNr, NetworkedCompNr, ContestNr, Operator, GridSquare, MiscText,  Continent, ContactType, Run1Run2, RoverLocation, RadioInterfaced, NetBiosName, IsOriginal, IsRunQSO) Values ('2014-08-10 01:46:00','N9ZXL',7050.56,7050.56,'CW','SKCCWES','599','569','K','N0TA','','DAVE','',0,'IL','','0',4,0,0,'0','0','0','',7.00,'N9','IL',0,0,4,'N0TA',' ','07114T',' ',' ',1,' ',1, 'HAM2', 1,0)

Error occurred at: 8/10/2014 7:22:28 AM in Thread: 

System.Data.SQLite.SQLiteException (0x80004005): database is locked

database is locked

   at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt)

   at System.Data.SQLite.SQLiteDataReader.NextResult()

   at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)

   at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)

   at System.Data.SQLite.SQLiteCommand.ExecuteReader()

   at N1MMLogger.Net.DBInterface.ExecuteQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 240

Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)

   at System.Environment.get_StackTrace()

   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 53

   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200

   at N1MMLogger.Net.DBInterface.ExecuteQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 251

   at N1MMLogger.Net.Contact.ToRow(SQLiteDataReader& rdr, Boolean& TriggerEvent, Boolean& NoLookup, Boolean& ReEditQSO, DBInterface aDB, Boolean PartOfBulkUpdate, Boolean IsResyncQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 2067

   at N1MMLogger.Net.Contact.LogContact(SQLiteDataReader& rdr) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 1882

   at N1MMLogger.Net.EntryWindow.LogContact2(Boolean& force, Boolean& PerformClearRxCk, String& RoverQTHString, Boolean& StoreCountyLineQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 9601

   at N1MMLogger.Net.EntryWindow.LogContact(Boolean& force, Boolean& PerformClearRxCk) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 9404

   at N1MMLogger.Net.EntryWindow.LogIt_Click(Object eventSender, EventArgs eventArgs) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 3935

   at System.Windows.Forms.Control.OnClick(EventArgs e)

   at System.Windows.Forms.Button.OnClick(EventArgs e)

   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)

   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)

   at System.Windows.Forms.Control.WndProc(Message& m)

   at System.Windows.Forms.ButtonBase.WndProc(Message& m)

   at System.Windows.Forms.Button.WndProc(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)

   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)

   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)

   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)

   at System.Windows.Forms.Application.Run(ApplicationContext context)

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)

   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82

 Thread # 1 @ 2014-08-15 02:49:39.243 AM - N1MMLogger.net - Version 0.18.3368.0

Built: 8/14/2014 11:55:06 AM

SQLString = Delete from DxLog where TS='2014-08-15 02:47:58' and call='W4NZ'

Error occurred at: 8/15/2014 2:49:39 AM in Thread: 

System.Data.SQLite.SQLiteException (0x80004005): database is locked

database is locked

   at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt)

   at System.Data.SQLite.SQLiteDataReader.NextResult()

   at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)

   at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)

   at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery(CommandBehavior behavior)

   at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery()

   at N1MMLogger.Net.DBInterface.ExecuteNonQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 198

Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)

   at System.Environment.get_StackTrace()

   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 53

   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200

   at N1MMLogger.Net.DBInterface.ExecuteNonQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 201

   at N1MMLogger.Net.Contact.ToRow(SQLiteDataReader& rdr, Boolean& TriggerEvent, Boolean& NoLookup, Boolean& ReEditQSO, DXLogDatabase aDB, Boolean PartOfBulkUpdate, Boolean IsResyncQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 1924

   at N1MMLogger.Net.EntryWindow.HandleKey(Int16& KeyCode, Boolean& ShiftDown, Boolean CtrlDown, Boolean AltDown, Boolean& HandleAll) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 8974

   at N1MMLogger.Net.EntryWindow.EntryWindow_KeyDown(Object eventSender, KeyEventArgs eventArgs) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 7846

   at System.Windows.Forms.Control.OnKeyDown(KeyEventArgs e)

   at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)

   at System.Windows.Forms.Form.ProcessKeyPreview(Message& m)

   at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)

   at System.Windows.Forms.Control.ProcessKeyMessage(Message& m)

   at System.Windows.Forms.Control.WmKeyChar(Message& m)

   at System.Windows.Forms.Control.WndProc(Message& m)

   at System.Windows.Forms.TextBoxBase.WndProc(Message& m)

   at System.Windows.Forms.TextBox.WndProc(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)

   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)

   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)

   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)

   at System.Windows.Forms.Application.Run(ApplicationContext context)

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)

   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82

Re: NS Sprint: 18.3368

John N0TA
 

According to N1MM, the version is 18.3368
  - John

Re: Contest testing...

Andrew O'Brien
 

Testing tonight, will send a report.
Andy K3UK


On Fri, Aug 15, 2014 at 8:56 AM, Ken K3IU kenk3iu@... [N1MMLoggerplus] <N1MMLoggerplus@...> wrote:
 

What is reported below happens in any contest I select, so I guess it is an Entry Window issue and NOT a CQWW RTTY contest issue.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


On 8/15/2014 8:18 AM, Ken K3IU kenk3iu@... [N1MMLoggerplus] wrote:
 

Rick:

CQWWRTTY...

When starting to look at this contest I noted the following which may NOT be contest specific, but since you asked... :-) .

When in S&P and change to Run using Alt+U, ESM button focus(yellow background) stays on F4 key until Enter or another Fkey is pressed. When changing  from Run to S&P using Alt+U, ESM button focus stays on F1 until Enter or any Fkey is pressed. The correct message is sent in both cases when Enter of any Fkey is pressed.

When changing from S&P <->Run by mouse clicking on the radio buttons produces an immediate change in the ESM button focus.

73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On 8/15/2014 12:03 AM, 'Rick Ellison' n2amg@... [N1MMLoggerplus] wrote:
 

I have now completed correcting the RTTY RQTC part of WAE. Both RTTY SQTC
and RQTC will need testing.

I need to have SARTG RTTY contest tested since it is this weekend. I want to
make sure that everything is working. I have fixed any bugs that were
reported about that one.

After completing WAE SSB the next big one I want to make sure works is
CQWWRTTY. If you get a chance and start testing that let me know if you find
any bugs.

73 Rick N2AMG

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com






--
Andy

Re: 18.3383 NAQP SSB

John Bednar
 

Craig,

 

I posted a fix for the legacy on the fly recording at the link below. You probably need to log into the website. It’s in the Files, Experimental Versions area.

 

http://n1mmplus.hamdocs.com/tiki-list_file_gallery.php?galleryId=20

 

The changes will be in tomorrow’s release. I posted it now in case you have time to test it tonight.

 

John,K3CT

 

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 6:44 PM
To: N1MMLoggerplus@...
Subject: [N1MMLoggerplus] Re: 18.3383 NAQP SSB

 

 

The "record on the fly" voice recordings have failed after version 3288, I can't go back any further because of the version time out "feature". 

Something got changed!!

This is the Control+Shift+F? function.

73, Craig K9CT

RTTY Offset with 2tone

Paul NN4F
 

How do i get the offset correct band map is still showing high compared to the radio when using 2tone?

Thanks, Paul - NN4F

Regarding the LogError.txt file

Andy (KU7T)
 

Just FYI,

 

The errors are always written to the end of the file. When we ask for log file, you can just give us the last section if that file with that build (or by date).

 

Also, It may be good to backup the Logerror.txt file to somewhere else and delete/clean it when you install a new build. It is sometimes confusing to see many errors, but they may date back weeks for older builds and do not matter anymore…

 

Thanks

Andy

KU7T

Re: NS Sprint: 18.3368

Andy (KU7T)
 

This is a week old build (3252). Many changes in that area since then, it’s not worth looking into this, unless you can you repro this on today’s build. Can you try? 

 

Thanks

Andy

KU7T

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 4:18 PM
To: N1MMLoggerplus@...
Subject: [N1MMLoggerplus] Re: NS Sprint: 18.3368

 

 

Its a fairly short file. The contest ran from 0230 to 0300z, so I think the problem was around 0245z.

 Thread # 1 @ 2014-08-06 23:19:23.953 PM - N1MMLogger.net - Version 0.18.3252.0

Built: 8/6/2014 5:02:42 AM

Error occurred at: 8/6/2014 5:19:23 PM in Thread: 

System.NullReferenceException: Object reference not set to an instance of an object.

   at N1MMLogger.Net.MSAccessConversionClass.MigrateDXLogTables() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\MSAccessConversion.vb:line 90

   at N1MMLogger.Net.MSAccessConversionClass.MigrateAllTablesFromMdbFile(String mdbFilePath, Boolean IsSkipAdmin) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\MSAccessConversion.vb:line 82

   at N1MMLogger.Net.EntryWindow.TryCreateNewDxLogDb(Boolean forced) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 15300

Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)

   at System.Environment.get_StackTrace()

   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 54

   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200

   at N1MMLogger.Net.EntryWindow.TryCreateNewDxLogDb(Boolean forced) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 15328

   at N1MMLogger.Net.EntryWindow.InitializeSingletonClasses() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 931

   at N1MMLogger.Net.EntryWindow..ctor() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 359

   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)

   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)

   at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)

   at System.Activator.CreateInstance[T]()

   at N1MMLogger.Net.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 187

   at N1MMLogger.Net.My.MyApplication.OnCreateMainForm() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\My Project\Application.Designer.vb:line 53

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)

   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82

 Thread # 51 @ 2014-08-07 02:41:36.682 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known

   at System.Net.Dns.GetAddrInfo(String name)

   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)

   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)

   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77

 Thread # 56 @ 2014-08-07 02:43:32.294 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known

   at System.Net.Dns.GetAddrInfo(String name)

   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)

   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)

   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77

 Thread # 58 @ 2014-08-07 02:45:45.814 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known

   at System.Net.Dns.GetAddrInfo(String name)

   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)

   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)

   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77

 Thread # 1 @ 2014-08-07 02:59:36.976 AM - SSB Message Error: File not found. 

2014-08-07 02:59:36.978 AM - Correct Configurer, Letters File Path, add a comma between wav files or remove the unexpected macro from the function key.

 Port: True Thread # 1 @ 2014-08-07 02:59:36.980 AM - Operator, station call - N0TA

2014-08-07 02:59:36.982 AM - User programmable Letters File Path - {Operator}\

2014-08-07 02:59:36.984 AM - Parsed Letters Path - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\LettersFiles\N0TA\

2014-08-07 02:59:36.986 AM - Unparsed function key string - N0TA\MYCALL.WAV

2014-08-07 02:59:36.988 AM - Parsed function key string - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV

2014-08-07 02:59:36.991 AM - Can't find this file - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV

 Thread # 1 @ 2014-08-07 02:59:38.390 AM - SSB Message Error: File not found. 

2014-08-07 02:59:38.394 AM - Correct Configurer, Letters File Path, add a comma between wav files or remove the unexpected macro from the function key.

 Port: True Thread # 1 @ 2014-08-07 02:59:38.398 AM - Operator, station call - N0TA

2014-08-07 02:59:38.401 AM - User programmable Letters File Path - {Operator}\

2014-08-07 02:59:38.404 AM - Parsed Letters Path - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\LettersFiles\N0TA\

2014-08-07 02:59:38.406 AM - Unparsed function key string - N0TA\MYCALL.WAV

2014-08-07 02:59:38.409 AM - Parsed function key string - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV

2014-08-07 02:59:43.000 AM - Can't find this file - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV

 Thread # 1 @ 2014-08-10 13:22:28.802 PM - N1MMLogger.net - Version 0.18.328.0

Built: 8/9/2014 6:46:18 AM

SQLString = Replace into dxlog (TS, Call, Freq, QSXFreq, Mode, ContestName, SNT, RCV, CountryPrefix, StationPrefix, QTH, Name, Comment, Nr, Sect, Prec, CK, ZN, SentNr, Points, IsMultiplier1, Ismultiplier2, Ismultiplier3, Power, Band, WPXPrefix, Exchange1, RadioNr, NetworkedCompNr, ContestNr, Operator, GridSquare, MiscText,  Continent, ContactType, Run1Run2, RoverLocation, RadioInterfaced, NetBiosName, IsOriginal, IsRunQSO) Values ('2014-08-10 01:46:00','N9ZXL',7050.56,7050.56,'CW','SKCCWES','599','569','K','N0TA','','DAVE','',0,'IL','','0',4,0,0,'0','0','0','',7.00,'N9','IL',0,0,4,'N0TA',' ','07114T',' ',' ',1,' ',1, 'HAM2', 1,0)

Error occurred at: 8/10/2014 7:22:28 AM in Thread: 

System.Data.SQLite.SQLiteException (0x80004005): database is locked

database is locked

   at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt)

   at System.Data.SQLite.SQLiteDataReader.NextResult()

   at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)

   at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)

   at System.Data.SQLite.SQLiteCommand.ExecuteReader()

   at N1MMLogger.Net.DBInterface.ExecuteQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 240

Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)

   at System.Environment.get_StackTrace()

   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 53

   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200

   at N1MMLogger.Net.DBInterface.ExecuteQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 251

   at N1MMLogger.Net.Contact.ToRow(SQLiteDataReader& rdr, Boolean& TriggerEvent, Boolean& NoLookup, Boolean& ReEditQSO, DBInterface aDB, Boolean PartOfBulkUpdate, Boolean IsResyncQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 2067

   at N1MMLogger.Net.Contact.LogContact(SQLiteDataReader& rdr) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 1882

   at N1MMLogger.Net.EntryWindow.LogContact2(Boolean& force, Boolean& PerformClearRxCk, String& RoverQTHString, Boolean& StoreCountyLineQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 9601

   at N1MMLogger.Net.EntryWindow.LogContact(Boolean& force, Boolean& PerformClearRxCk) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 9404

   at N1MMLogger.Net.EntryWindow.LogIt_Click(Object eventSender, EventArgs eventArgs) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 3935

   at System.Windows.Forms.Control.OnClick(EventArgs e)

   at System.Windows.Forms.Button.OnClick(EventArgs e)

   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)

   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)

   at System.Windows.Forms.Control.WndProc(Message& m)

   at System.Windows.Forms.ButtonBase.WndProc(Message& m)

   at System.Windows.Forms.Button.WndProc(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)

   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)

   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)

   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)

   at System.Windows.Forms.Application.Run(ApplicationContext context)

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)

   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82

 Thread # 1 @ 2014-08-15 02:49:39.243 AM - N1MMLogger.net - Version 0.18.3368.0

Built: 8/14/2014 11:55:06 AM

SQLString = Delete from DxLog where TS='2014-08-15 02:47:58' and call='W4NZ'

Error occurred at: 8/15/2014 2:49:39 AM in Thread: 

System.Data.SQLite.SQLiteException (0x80004005): database is locked

database is locked

   at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt)

   at System.Data.SQLite.SQLiteDataReader.NextResult()

   at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)

   at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)

   at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery(CommandBehavior behavior)

   at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery()

   at N1MMLogger.Net.DBInterface.ExecuteNonQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 198

Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)

   at System.Environment.get_StackTrace()

   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 53

   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200

   at N1MMLogger.Net.DBInterface.ExecuteNonQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 201

   at N1MMLogger.Net.Contact.ToRow(SQLiteDataReader& rdr, Boolean& TriggerEvent, Boolean& NoLookup, Boolean& ReEditQSO, DXLogDatabase aDB, Boolean PartOfBulkUpdate, Boolean IsResyncQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 1924

   at N1MMLogger.Net.EntryWindow.HandleKey(Int16& KeyCode, Boolean& ShiftDown, Boolean CtrlDown, Boolean AltDown, Boolean& HandleAll) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 8974

   at N1MMLogger.Net.EntryWindow.EntryWindow_KeyDown(Object eventSender, KeyEventArgs eventArgs) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 7846

   at System.Windows.Forms.Control.OnKeyDown(KeyEventArgs e)

   at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)

   at System.Windows.Forms.Form.ProcessKeyPreview(Message& m)

   at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)

   at System.Windows.Forms.Control.ProcessKeyMessage(Message& m)

   at System.Windows.Forms.Control.WmKeyChar(Message& m)

   at System.Windows.Forms.Control.WndProc(Message& m)

   at System.Windows.Forms.TextBoxBase.WndProc(Message& m)

   at System.Windows.Forms.TextBox.WndProc(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)

   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)

   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)

   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)

   at System.Windows.Forms.Application.Run(ApplicationContext context)

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()

   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)

   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82

Re: Callsign look up

KU7Y <ku7y.cw@...>
 

Thanks Rich,

 

Got that working great now!! Thanks.

 

Now if I could only figure why I can't get to the 18.3383 update file.

 

OK, back in my hole,

 

Ron, KU7Y

Arizona Outlaws Contest Club

Northern California Contest Club

ku7y@...

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 10:35 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] Callsign look up

 

 

Yes, if you have the Reverse Look Up pane enabled in the Check window (it's on the right-click menu) then call signs that match the exchange info you have typed into the exchange box(es) in the Entry Window will be displayed in the Reverse Look Up pane (the one across the bottom of the Check window). You can mouse-click on one of the call signs to transfer it into the EW, or you can use the Yank hot key (Alt+Y) to transfer calls from the Check window to the Entry Window. You can control the order call signs are transferred with Yank by using a right-click menu item in the Check window (see N1MM Logger Website | Check Window

N1MM Logger Website | Check Window

2.6.5 The Check Window 2.6.5 The Check Window 1. Key Features 1.1. Reverse Call History Lookup 2. Right-Click Menu 1. Key Features

Preview by Yahoo

 

).There is a basic description of Reverse Look Up in the manual at http://n1mmplus.hamdocs.com/tiki-index.php?page=Call+History+and+Reverse+Call+History+Lookup&structure=N1MM+Logger+Documentation#Reverse_Call_History_Lookup . This description is actually for the feature in Classic, and Reverse Look Up has been improved in Plus so the old description is not 100% accurate, but the basic idea is the same. 73,Rich VE3KI

Re: 18.3383 NAQP SSB

John Bednar
 

I'll take a look at it tonight when I get home.

John, K3CT


-------- Original message --------
From: "craig@... [N1MMLoggerplus]"
Date:08/15/2014 6:44 PM (GMT-05:00)
To: N1MMLoggerplus@...
Subject: [N1MMLoggerplus] Re: 18.3383 NAQP SSB

 

The "record on the fly" voice recordings have failed after version 3288, I can't go back any further because of the version time out "feature". 

Something got changed!!
This is the Control+Shift+F? function.
73, Craig K9CT

Re: NS Sprint: 18.3368

John N0TA
 

Its a fairly short file. The contest ran from 0230 to 0300z, so I think the problem was around 0245z.
 Thread # 1 @ 2014-08-06 23:19:23.953 PM - N1MMLogger.net - Version 0.18.3252.0
Built: 8/6/2014 5:02:42 AM
Error occurred at: 8/6/2014 5:19:23 PM in Thread: 
System.NullReferenceException: Object reference not set to an instance of an object.
   at N1MMLogger.Net.MSAccessConversionClass.MigrateDXLogTables() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\MSAccessConversion.vb:line 90
   at N1MMLogger.Net.MSAccessConversionClass.MigrateAllTablesFromMdbFile(String mdbFilePath, Boolean IsSkipAdmin) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\MSAccessConversion.vb:line 82
   at N1MMLogger.Net.EntryWindow.TryCreateNewDxLogDb(Boolean forced) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 15300
Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
   at System.Environment.get_StackTrace()
   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 54
   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200
   at N1MMLogger.Net.EntryWindow.TryCreateNewDxLogDb(Boolean forced) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 15328
   at N1MMLogger.Net.EntryWindow.InitializeSingletonClasses() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 931
   at N1MMLogger.Net.EntryWindow..ctor() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 359
   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.Activator.CreateInstance[T]()
   at N1MMLogger.Net.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 187
   at N1MMLogger.Net.My.MyApplication.OnCreateMainForm() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\My Project\Application.Designer.vb:line 53
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82
 Thread # 51 @ 2014-08-07 02:41:36.682 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known
   at System.Net.Dns.GetAddrInfo(String name)
   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)
   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77
 Thread # 56 @ 2014-08-07 02:43:32.294 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known
   at System.Net.Dns.GetAddrInfo(String name)
   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)
   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77
 Thread # 58 @ 2014-08-07 02:45:45.814 AM - There was an error to connect to AB5K. System.Net.Sockets.SocketException (0x80004005): No such host is known
   at System.Net.Dns.GetAddrInfo(String name)
   at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
   at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)
   at N1MMLogger.Net.AsynchronousClient.Main() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Async Telnet Classes.vb:line 77
 Thread # 1 @ 2014-08-07 02:59:36.976 AM - SSB Message Error: File not found. 
2014-08-07 02:59:36.978 AM - Correct Configurer, Letters File Path, add a comma between wav files or remove the unexpected macro from the function key.
 Port: True Thread # 1 @ 2014-08-07 02:59:36.980 AM - Operator, station call - N0TA
2014-08-07 02:59:36.982 AM - User programmable Letters File Path - {Operator}\
2014-08-07 02:59:36.984 AM - Parsed Letters Path - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\LettersFiles\N0TA\
2014-08-07 02:59:36.986 AM - Unparsed function key string - N0TA\MYCALL.WAV
2014-08-07 02:59:36.988 AM - Parsed function key string - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV
2014-08-07 02:59:36.991 AM - Can't find this file - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV
 Thread # 1 @ 2014-08-07 02:59:38.390 AM - SSB Message Error: File not found. 
2014-08-07 02:59:38.394 AM - Correct Configurer, Letters File Path, add a comma between wav files or remove the unexpected macro from the function key.
 Port: True Thread # 1 @ 2014-08-07 02:59:38.398 AM - Operator, station call - N0TA
2014-08-07 02:59:38.401 AM - User programmable Letters File Path - {Operator}\
2014-08-07 02:59:38.404 AM - Parsed Letters Path - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\LettersFiles\N0TA\
2014-08-07 02:59:38.406 AM - Unparsed function key string - N0TA\MYCALL.WAV
2014-08-07 02:59:38.409 AM - Parsed function key string - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV
2014-08-07 02:59:43.000 AM - Can't find this file - C:\Users\reillyjf\Documents\N1MM Logger+\Wav\N0TA\MYCALL.WAV
 Thread # 1 @ 2014-08-10 13:22:28.802 PM - N1MMLogger.net - Version 0.18.328.0
Built: 8/9/2014 6:46:18 AM
SQLString = Replace into dxlog (TS, Call, Freq, QSXFreq, Mode, ContestName, SNT, RCV, CountryPrefix, StationPrefix, QTH, Name, Comment, Nr, Sect, Prec, CK, ZN, SentNr, Points, IsMultiplier1, Ismultiplier2, Ismultiplier3, Power, Band, WPXPrefix, Exchange1, RadioNr, NetworkedCompNr, ContestNr, Operator, GridSquare, MiscText,  Continent, ContactType, Run1Run2, RoverLocation, RadioInterfaced, NetBiosName, IsOriginal, IsRunQSO) Values ('2014-08-10 01:46:00','N9ZXL',7050.56,7050.56,'CW','SKCCWES','599','569','K','N0TA','','DAVE','',0,'IL','','0',4,0,0,'0','0','0','',7.00,'N9','IL',0,0,4,'N0TA',' ','07114T',' ',' ',1,' ',1, 'HAM2', 1,0)
Error occurred at: 8/10/2014 7:22:28 AM in Thread: 
System.Data.SQLite.SQLiteException (0x80004005): database is locked
database is locked
   at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt)
   at System.Data.SQLite.SQLiteDataReader.NextResult()
   at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)
   at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)
   at System.Data.SQLite.SQLiteCommand.ExecuteReader()
   at N1MMLogger.Net.DBInterface.ExecuteQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 240
Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
   at System.Environment.get_StackTrace()
   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 53
   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200
   at N1MMLogger.Net.DBInterface.ExecuteQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 251
   at N1MMLogger.Net.Contact.ToRow(SQLiteDataReader& rdr, Boolean& TriggerEvent, Boolean& NoLookup, Boolean& ReEditQSO, DBInterface aDB, Boolean PartOfBulkUpdate, Boolean IsResyncQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 2067
   at N1MMLogger.Net.Contact.LogContact(SQLiteDataReader& rdr) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 1882
   at N1MMLogger.Net.EntryWindow.LogContact2(Boolean& force, Boolean& PerformClearRxCk, String& RoverQTHString, Boolean& StoreCountyLineQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 9601
   at N1MMLogger.Net.EntryWindow.LogContact(Boolean& force, Boolean& PerformClearRxCk) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 9404
   at N1MMLogger.Net.EntryWindow.LogIt_Click(Object eventSender, EventArgs eventArgs) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 3935
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.Run(ApplicationContext context)
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82
 Thread # 1 @ 2014-08-15 02:49:39.243 AM - N1MMLogger.net - Version 0.18.3368.0
Built: 8/14/2014 11:55:06 AM
SQLString = Delete from DxLog where TS='2014-08-15 02:47:58' and call='W4NZ'
Error occurred at: 8/15/2014 2:49:39 AM in Thread: 
System.Data.SQLite.SQLiteException (0x80004005): database is locked
database is locked
   at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt)
   at System.Data.SQLite.SQLiteDataReader.NextResult()
   at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)
   at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)
   at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery(CommandBehavior behavior)
   at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery()
   at N1MMLogger.Net.DBInterface.ExecuteNonQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 198
Call Stack before the runtime error:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
   at System.Environment.get_StackTrace()
   at N1MMLibrary.SharedLib.CallStackString() in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Library\Classes\SharedCode.vb:line 53
   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Modules\SharedCode.vb:line 200
   at N1MMLogger.Net.DBInterface.ExecuteNonQuery(String SQLString) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\DBInterface.vb:line 201
   at N1MMLogger.Net.Contact.ToRow(SQLiteDataReader& rdr, Boolean& TriggerEvent, Boolean& NoLookup, Boolean& ReEditQSO, DXLogDatabase aDB, Boolean PartOfBulkUpdate, Boolean IsResyncQSO) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Classes\Contact.vb:line 1924
   at N1MMLogger.Net.EntryWindow.HandleKey(Int16& KeyCode, Boolean& ShiftDown, Boolean CtrlDown, Boolean AltDown, Boolean& HandleAll) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 8974
   at N1MMLogger.Net.EntryWindow.EntryWindow_KeyDown(Object eventSender, KeyEventArgs eventArgs) in C:\Users\Tom\Documents\Visual Studio 2010\Projects\TeamFoundationServer\N1MM Logger on .NET\N1MM Logger.Net\Forms\EntryWindow.vb:line 7846
   at System.Windows.Forms.Control.OnKeyDown(KeyEventArgs e)
   at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)
   at System.Windows.Forms.Form.ProcessKeyPreview(Message& m)
   at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
   at System.Windows.Forms.Control.ProcessKeyMessage(Message& m)
   at System.Windows.Forms.Control.WmKeyChar(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.TextBoxBase.WndProc(Message& m)
   at System.Windows.Forms.TextBox.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.Run(ApplicationContext context)
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
   at N1MMLogger.Net.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 82

Re: 18.3383 NAQP SSB

n7bv@...
 

Thanks, was set for cw in mode control.   73, Chuck

Re: 18.3383 NAQP SSB

Craig Thompson
 

The "record on the fly" voice recordings have failed after version 3288, I can't go back any further because of the version time out "feature". 
Something got changed!!
This is the Control+Shift+F? function.
73, Craig K9CT

Re: 18.3383 NAQP SSB

ve3ki@...
 

Type USB (or LSB) into the EW and hit Enter. Do the function keys change to SSB? If not, check your settings under Mode Control in the Configurer.73,Rich VE3KI

18.3383 NAQP SSB

Chuck Jones <n7bv@...>
 

Trying to set up for the NAQP SSB for tomorrow. 

Unable to assign a ssb wave mc file to the ssb associated files.   Indications are it takes, however when right clicking on a function key to see it is the cw file that comes up.

Anyone else seeing this??   Or is this op error this end?

73, Chuck N7BV

 

Re: NS Sprint: 18.3368

Steve London
 

John,

All N1MM+ crashes are also stored in LogError.txt.

73,
Steve, N2IC

On 08/15/2014 08:43 AM, reillyjf@... [N1MMLoggerplus] wrote:
Installed 18.3368 prior to the NS Sprints last night. No problems during
the initial RTTY sprint; however, N1MM+ crashed half way through the CW
sprint. I didn't recover the crash dump in the heat of battle -- sorry.
Then, after the sprint, I discovered that all of my 40m Q's were
recorded as 20m. I wasn't paying close attention to the frequency on the
entry window, so not sure if a rig interface issue is the root of these
problems (K3: but it has been stable for a very long time).

Re: Callsign look up

ve3ki@...
 

Yes, if you have the Reverse Look Up pane enabled in the Check window (it's on the right-click menu) then call signs that match the exchange info you have typed into the exchange box(es) in the Entry Window will be displayed in the Reverse Look Up pane (the one across the bottom of the Check window). You can mouse-click on one of the call signs to transfer it into the EW, or you can use the Yank hot key (Alt+Y) to transfer calls from the Check window to the Entry Window. You can control the order call signs are transferred with Yank by using a right-click menu item in the Check window (see N1MM Logger Website | Check Window

 

).There is a basic description of Reverse Look Up in the manual at http://n1mmplus.hamdocs.com/tiki-index.php?page=Call+History+and+Reverse+Call+History+Lookup&structure=N1MM+Logger+Documentation#Reverse_Call_History_Lookup . This description is actually for the feature in Classic, and Reverse Look Up has been improved in Plus so the old description is not 100% accurate, but the basic idea is the same. 73,Rich VE3KI

Re: Callsign look up

Andy (KU7T)
 

Additionally, you can use Alt+Y (yank) to loop over the calls found in the check window and populate the EW.

 

Example: Use CWT, and CWT call history, type Ron in the Name field, then hit Alt+Y consecutively.

 

Andy

KU7T

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 10:14 AM
To: N1MMLoggerplus@...
Subject: RE: [N1MMLoggerplus] Callsign look up

 

 

Hi Bob,

 

Yep, you are right!  I didn't have the Check Log window open.

 

I'll use that in the future.  This should save a bit of time while S&Ping.

 

Thanks!

 

OK, back in my hole,

 

Ron, KU7Y

Arizona Outlaws Contest Club

Northern California Contest Club

ku7y@...

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 10:02 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] Callsign look up

 

 

I don't think you have to hit any key. Isn't what you are looking for at the bottom of the "Check Log" window  titled "Reverse lookup"? I have seen call signs pop up in that area when the call sign field is blank and I entered exchange data.

73 de Bob - KØRC in MN


 

On 8/15/2014 11:37 AM, 'KU7Y' ku7y.cw@... [N1MMLoggerplus] wrote:

 

I seem to remember a post from a long time ago that said something about
being able to enter some exchange data in the entry window and N1MM could
fill in the callsign.

For example, let's say I'm doing the CWT. Exchange is Name and Member
Number. I have a Call History file loaded.

If I come to a running station who is just starting his reply, I'll get his
Name and Number. What key combination to I hit to have N1MM fill in his
call, or can that be done?

Thanks,

OK, back in my hole,

Ron, KU7Y
Arizona Outlaws Contest Club
Northern California Contest Club
ku7y@...

Re: Callsign look up

KU7Y <ku7y.cw@...>
 

Hi Bob,

 

Yep, you are right!  I didn't have the Check Log window open.

 

I'll use that in the future.  This should save a bit of time while S&Ping.

 

Thanks!

 

OK, back in my hole,

 

Ron, KU7Y

Arizona Outlaws Contest Club

Northern California Contest Club

ku7y@...

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Friday, August 15, 2014 10:02 AM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] Callsign look up

 

 

I don't think you have to hit any key. Isn't what you are looking for at the bottom of the "Check Log" window  titled "Reverse lookup"? I have seen call signs pop up in that area when the call sign field is blank and I entered exchange data.

73 de Bob - KØRC in MN


 

On 8/15/2014 11:37 AM, 'KU7Y' ku7y.cw@... [N1MMLoggerplus] wrote:

 

I seem to remember a post from a long time ago that said something about
being able to enter some exchange data in the entry window and N1MM could
fill in the callsign.

For example, let's say I'm doing the CWT. Exchange is Name and Member
Number. I have a Call History file loaded.

If I come to a running station who is just starting his reply, I'll get his
Name and Number. What key combination to I hit to have N1MM fill in his
call, or can that be done?

Thanks,

OK, back in my hole,

Ron, KU7Y
Arizona Outlaws Contest Club
Northern California Contest Club
ku7y@...