Date   
Re: Antenna Selection

Hank Garretson
 

Thank you everyone for your responses and suggestions. Lots of good ideas.

I think that first I will try to add a parallel port to my shack computer.

Contest Exuberantly,

Hank, W6SX

Re: Ini file

Peter Alterman
 

Ken, 

Assuming you're running Windows, you can go into your Recycle Bin and undelete the .ini file. I believe you can undelete a file on a Mac  as well.

73, Peter W2CDO


To: N1MMLoggerplus@...
From: N1MMLoggerplus@...
Date: Wed, 27 Apr 2016 14:19:05 -0400
Subject: Re: [N1MMLoggerplus] Ini file

 

Ken,
 
There is a section of the manual devoted to the INI file and its backups.
 
See 1.9.5 Getting Started >Troubleshooting >Troubleshooting Advice and Procedures from the N1MM Dev Team >The N1MM Logger+ INI file
 
 
-larry (K8UT)
 

Sent: Wednesday, April 27, 2016 9:46 AM
Subject: [N1MMLoggerplus] Ini file
 
 
By accident, I've been and deleted my n1mmplus file, what's the procedure please in restoring my original, I'm guessing it made a backup...I hope!

Thanks

Ken.. G0ORH

Sent from my iPad



Re: Ini file

Larry K8UT
 

Ken,
 
There is a section of the manual devoted to the INI file and its backups.
 
See 1.9.5 Getting Started >Troubleshooting >Troubleshooting Advice and Procedures from the N1MM Dev Team >The N1MM Logger+ INI file
 
 
-larry (K8UT)
 

Sent: Wednesday, April 27, 2016 9:46 AM
Subject: [N1MMLoggerplus] Ini file
 
 

By accident, I've been and deleted my n1mmplus file, what's the procedure please in restoring my original, I'm guessing it made a backup...I hope!

Thanks

Ken.. G0ORH

Sent from my iPad

Re: Is this weekend's Russian WW Multimode contest supported in N1MM+?

Jan Pieter Oelp
 


It is supported
RUS-WW-MM
73, Jan
 
 

----- Original Message -----
Sent: Wednesday, April 27, 2016 6:04 PM
Subject: [N1MMLoggerplus] Is this weekend's Russian WW Multimode contest supported in N1MM+?

 

Looking to participate in this contest this weekend.

Is it supported? If not, is there a UDC or experimental template available? Have not been able to find anything about the contest in the N1MM+ documentation.


73

Mike N1MD

Re: Is this weekend's Russian WW Multimode contest supported in N1MM+?

Goetz DJ3IW
 

Their website has the information:

Module RUS-WW-MM is in standard release N1MM Logger+ : http://n1mm.hamdocs.com/tiki-list_file_gallery.php?

galleryId=7

In addition load and establish a file oblast.sec in which last changes are considered: oblast.sec

 

73 de Goetz DJ3IW

 

Von: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Gesendet: Mittwoch, 27. April 2016 16:04
An: N1MMLoggerplus@...
Betreff: [N1MMLoggerplus] Is this weekend's Russian WW Multimode contest supported in N1MM+?

 

 

Looking to participate in this contest this weekend.

Is it supported? If not, is there a UDC or experimental template available? Have not been able to find anything about the contest in the N1MM+ documentation.

 

73

Mike N1MD

N1mm ini file

Ken G0ORH
 

Hi
Thanks for your response, I've got it sorted.

Ken.. G0ORH

Is this weekend's Russian WW Multimode contest supported in N1MM+?

Michael Therrien
 

Looking to participate in this contest this weekend.

Is it supported? If not, is there a UDC or experimental template available? Have not been able to find anything about the contest in the N1MM+ documentation.


73

Mike N1MD

Re: Ini file

Les Elliott
 

Exactly what have you deleted, Ken
 
Les, G4OGB
 

Sent: Wednesday, April 27, 2016 2:46 PM
Subject: [N1MMLoggerplus] Ini file
 
 

By accident, I've been and deleted my n1mmplus file, what's the procedure please in restoring my original, I'm guessing it made a backup...I hope!

Thanks

Ken.. G0ORH

Sent from my iPad

Logger+ Audio won't drive radio with SignaLink

Milton Griggs
 

Hi,

I'm trying to use the voice keyer feature, however the audio into my SignaLink out to the radio is not enough to drive any power out.

The SignaLink is working fine and driving the radio with HRD, and other audio generating programs.

I have tried using the voice recorder built into the logger and Audacity but the problem still exists.

I have listen to the audio through the computer speakers and the audio is fine. The audio out into the SignaLink as gauged by the audio panel is fine. The PTT on the SignaLink comes on. The radio keys up fine. There is just no drive.

Before the plus version, N1MM worked fine driving the radio. Strangely enough, the test audio within the logger drives the radio.

My set up:
Windows Vista
Up to date version of N1MM+
SignaLink USB, JP4 is on
TS-2000

Any help would be greatly appreciated.


Thank you, 
Milton
AK4RV

Sent using CloudMagic Email

Ini file

Ken G0ORH
 

Sorry that's my ini file I've deleted!!

Ken.. G0ORH



Begin forwarded message:

From: Ken Chandler <G0ORH@...>
Date: 27 April 2016 at 14:46:12 BST
To: N1MMLoggerplus@...
Subject: Ini file

By accident, I've been and deleted my n1mmplus.ini file, what's the procedure please in restoring my original, I'm guessing it made a backup...I hope!

Thanks

Ken.. G0ORH




Ini file

Ken G0ORH
 

By accident, I've been and deleted my n1mmplus file, what's the procedure please in restoring my original, I'm guessing it made a backup...I hope!

Thanks

Ken.. G0ORH

SOLD!!! Re: FS: Green Heron RT-21pp controller

Jorge Diez - CX6VM
 

Hello

The controller is sold

73,
Jorge
CX6VM/CW5W

Enviado desde mi iPhone

El 21 abr. 2016, a las 09:31, Jorge Diez - CX6VM <cx6vm.jorge@...> escribió:

Hello

I have a Green Heron RT-21pp controller for sale. Very few use, like new in original box

Asking $ 400.- + shipping from PA ,17543

If interested contact me directly
 
--
73,
Jorge
CX6VM/CW5W

Libre de virus. www.avast.com

Re: PCI-E Parallel Port Cards

Pete Smith
 

I an using one in my Dell - I think it is Startech.  I wrote the section in the manual on addressing these cards - I suspect any card that uses the OPxford Semiconductor chipset will work.

73, Pete N4ZR
Download the new N1MM Logger+ at 
. Check 
out the Reverse Beacon Network at 
, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 4/25/2016 12:24 PM, n7bv@... [N1MMLoggerplus] wrote:

GM,

I recently acquired two Dell computers which only have spare PCI-e sockets, thus I need to replace my old Byterunner parallel port PCI-buss card.

Suggestions would be appreciated.

Thanks.   Chuck N7BV



Re: Crowne Plaza Dayton room available

Jorge Diez - CX6VM
 

Hi

the room is no more available, I passed the room to the first answer I received

thanks,
Jorge

2016-04-26 9:04 GMT-03:00 Jorge Diez - CX6VM <cx6vm.jorge@...>:

Hello

I have a room, double bed,  in the Crowne plaza, may 18 to 22

Rate is 145 + taxes

Let me know if you want it and I will pass my reservation for you


73,
Jorge
CX6VM/CW5W



--
73,
Jorge
CX6VM/CW5W

Re: Crowne Plaza Dayton room available

Mark Bailey
 

Hi Jorge:

I would like the room if it is still available.

Thanks and 73,

Mark Bailey, KD4D

----- Original Message -----
From: "Jorge Diez - CX6VM cx6vm.jorge@... [N1MMLoggerplus]" <N1MMLoggerplus@...>
To: "Elecraft Reflector" <elecraft@...>, "N1MMLoggerplus@..." <n1mmloggerplus@...>
Sent: Tuesday, April 26, 2016 8:04:31 AM
Subject: [N1MMLoggerplus] Crowne Plaza Dayton room available

Hello

I have a room, double bed, in the Crowne plaza, may 18 to 22

Rate is 145 + taxes

Let me know if you want it and I will pass my reservation for you


73,
Jorge
CX6VM/CW5W

Re: GRITTY & N1MM

AI9T
 

Hi Rick

I was clicking on the actual GRITTY window. Left click would ad the call to the entry window but right click would not work. Now that I can attach the window this is not a problem. I normally run them attached.

Thanks

73
Steve AI9T

Re: FLdigi with K3

Rick Ellison
 

Let me digest this and will go to work doing some coding. Both engines should act the same and I thought they did. But it’s obvious that something has changed.

 

On the subject of typing PSK in the entry window. I do not do anything with that because MMVARI/Fldigi needs to know what mode it should be set to, by typing PSK there is no way to know what mode you want MMVARI/Fldigi to switch to. And I figure what’s 2 or 3 extra characters of typing..

 

73 Rick N2AMG

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Saturday, April 23, 2016 12:08 PM
To: N1MMLoggerplus@...
Subject: [N1MMLoggerplus] Re: FLdigi with K3

 

 

First, if you want to use fldigi for both PSK and RTTY, the simplest solution to the mode change problem might be to use DATA A for all digital modes including RTTY. However, whether you do this or not, in order to be sure contacts are logged in the correct mode, you should make your mode changes from N1MM+, not from fldigi. It may be possible to change this in future, but I believe this is what you have to do with the current program version. 

 

Rick N2AMG (who programs the digital modes in N1MM+) is away for several days, so if there are any changes to be made they will have to wait on his return.

 

In much more detail:

 

In order to isolate issues related specifically to fldigi from more general issues with N1MM+, here is what happens when MMVARI is used rather than fldigi:

 

1. Changing modes by clicking on one of the RTTY or PSK buttons in the band panel in the N1MM+ Entry window causes the following to happen:

a. The logging mode in N1MM+ changes to match the mode of the button that was clicked on.

b. The frequency changes to match the last-used frequency in that mode on the band of the button that was clicked on.

c. If the DI window is not open, it is opened.

d. The digital engine changes to the Default RTTY or PSK interface depending on which button was clicked on. These defaults are defined in the DI Setup window.

e. If the default interface for the button mode is MMVARI, the mode in MMVARI changes to match the button mode.

f. The radio's mode is changed to the mode specified in the Configurer under Mode Control, Mode sent to radio (right-hand side). The RTTY button in the band panel selects the radio mode specified for RTTY under Mode sent to radio, and the PSK button in the band panel selects the radio mode specified for PSK under Mode sent to radio. A mode of RTTY in the pull-down selector puts the K3 into FSK D mode; AFSK in the pull-down selector puts the K3 into AFSK A mode; and PSK in the pull-down selector puts the K3 into DATA A mode. 



Note that on the K3, in either FSK D or AFSK A you want AutoTRXUpdate turned off, whereas in DATA A you want it turned on, i.e. in order to log frequencies accurately, you will have to change the AutoTRXUpdate setting when the K3 changes modes between RTTY (either FSK D or AFSK A) and DATA A. You can avoid this in dual-mode contests by using DATA A for RTTY as well as for PSK and leaving AutoTRXUpdate on in both modes.

 

2. Changing modes by typing RTTY, PSK31 or PSK63 into the call sign box in the Entry window and pressing Enter is almost the same, except step b above does not happen, i.e. the frequency does not change (if AutoTRXUpdate is turned on, there may be a small 85 Hz shift because MMVARI uses the centre frequency in RTTY instead of the Mark frequency).

 

Comment: It might be nice if typing PSK (rather than PSK31 or PSK63) into the call sign box also switched the logging mode to PSK; right now it appears to be treated the same way as a partial call sign, i.e. with ESM on, typing PSK and pressing Enter causes F4 or F1 to be transmitted.

 

3. Changing modes inside MMVARI works very much like 2 above, i.e. MMVARI is sufficiently well-integrated that changing modes in MMVARI causes N1MM+ to change modes as well.

 

4. Changing the Interface from the DI window menu will change the digital engine, but in the case of MMVARI the mode will be the last mode that was used in MMVARI, i.e. if you are currently in RTTY and change interfaces to MMVARI, it may switch everything to PSK if that was what was last used in MMVARI.

 

Comment: Perhaps the mode currently in use before the interface change should take priority over the mode last used in MMVARI.

 

Now for fldigi. The first point is that changing the Op Mode in fldigi has no effect on N1MM+, at least in the current version. This might be an implementation issue, i.e. it might or might not be feasible to integrate fldigi into N1MM+ as closely as MMVARI is; or it might just be a bug. Leaving that aside until Rick returns, a workaround for now is to make all mode changes from N1MM+, not from fldigi. This might require you to change the Default RTTY and PSK Interface in the DI Setup to fldigi, in order to prevent the program from changing to MMTTY or MMVARI when you change modes.

 

The second point is that when the digital engine is fldigi, changing the logging mode in N1MM+ apparently does not quite complete the mode change on the radio if a change is required. After changing the logging mode, the radio's mode does not change until the next frequency change commanded from N1MM+. This looks like a bug, but in the interim there is a work-around: after changing modes from N1MM+, you can type either +0 or -0 into the Entry window and press Enter. This will cause a frequency change of zero, and that will update the mode sent to the radio.

 

Note that fldigi assumes the radio is in upper sideband for all modes, including RTTY. If you set the Mode sent to radio in the Configurer for RTTY to PSK, the K3 will stay in DATA A for RTTY as well as for PSK, and you won't have to use the Reverse button for RTTY in fldigi. If you do this, you would leave AutoTRXUpdate on in both modes. This may be a simpler way to operate with fldigi, at least in dual-mode contests. Note that if you do this, you can change modes using fldigi's Op Mode menu, but if you do so, N1MM+ will continue to log the contacts in the previous mode, i.e. you might find contacts being logged in the wrong mode even though the operation appears to be correct. Again, the solution, at least for now, is to make mode changes from N1MM+ and not from fldigi.

 

73,

Rich VE3KI

 


---In N1MMLoggerplus@..., <stevegm4oss@...> wrote :

Hi

I've installed FLdigi to run in N1MM for the RSGB PSK/RTTY contests. I can send & receive in both modes OK. The only issue is when I try changing from PSK to RTTY (and vice versa) pressing the OpMode in FLdigi engine 1 window my K3 does not change mode.

Everything else appears to work OK with my setup except the above.

My setup: N1MM+, FLdigi, MK2, K3 (AFSK A for RTTY & DATA A for PSK)

Is there something I'm missing out or doing wrong?

Cheers.


--

73 de Steve GM4OSS

 

Re: GRITTY & N1MM

Rick Ellison
 

Steve..

I am curious what window were you right clicking in that was not working with the right click?

The minimized (not the attached) rx window or the actual Gritty window??

The minimized one should already accept the right click but I have not added a right click option for the actual Gritty window. It would be easy to intercept the right clikc in Gritty and have that act the same way when using the Right click sends setting.

 

73 Rick N2AMG

 

From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]
Sent: Monday, April 25, 2016 2:32 PM
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] GRITTY & N1MM

 

 

Hi Rich & All
I stand corrected on this. A week or 2 ago or so when I first set this up you couldn't use GRITTY as an attached window. I'm thinking it would even tell you that. I just tried this again and now it can be attached and works just fine. I guess that is what I get for assuming and not rechecking. I was actually using them this weekend unattached. I prefer them to be attached.

sorry for all the useless emails

73
Steve AI9T

Crowne Plaza Dayton room available

Jorge Diez - CX6VM
 

Hello

I have a room, double bed,  in the Crowne plaza, may 18 to 22

Rate is 145 + taxes

Let me know if you want it and I will pass my reservation for you


73,
Jorge
CX6VM/CW5W

FS: Green Heron RT-21pp controller

Jorge Diez - CX6VM
 

Hello

I have a Green Heron RT-21pp controller for sale. Very few use, like new in original box

This is the controller you need for the powerful rotor, K7NV Prop Pitch

Asking $ 400.- + shipping from PA ,17543

If interested contact me directly

-- 
73,
Jorge
CX6VM/CW5W