You don’t have some labeled...see F1 under run, after the comma you have CQ Test....that’s the label.....see under F2, after the comma the macro starts , no label....

On Jan 16, 2021, at 12:38 PM, Tad Danley <tdanley@centurylink.net> wrote:

#
# CW Function Key File
#
# This file can be used in most CW contests that have a simple exchange
# The {EXCH} macro uses the contents of the Sent Exchange box in the
contest setup
# The {SENTRSTCUT} defaults to 5NN. If you want to send another signal
report,
# change the Sent RST in the Entry Window before transmitting your
exchange.
#
# F5 uses "!" macro for his callsign
# Do not use the {CALL} macro in place of the ! macro
#
# S&P F1 calls QRL? before placing the program in RUN mode for calling CQ
# To respond to caller, send F5 then F2, or ; (default exchange key) or
# Insert, or Enter in ESM
#
###################
# RUN Messages
###################
F1 Cq,Cq Test {MYCALL} {MYCALL}
F2 Exch,{SENTRSTCUT} {EXCH}
F3 Tu,Tu {MYCALL}
F4 {MYCALL},K3TD
F5 His Call,!
F6 Repeat,{SENTRSTCUT} {EXCH} {EXCH}
F7 Spare,
F8 Agn?,Agn?
F9 Nr?,Nr?
F10 Call?,Cl?
F11 Spare,
F12 Wipe,{WIPE}
#
###################
# S&P Messages
###################
F1 N/A,
F2 Exch,TU FM05
F3 N/A,
F4 K3TD,K3~TD
F5 N/A
F6 EXCH,FM05 FM05
F7 N/A,
F8 Agn?,?
F9 N/A,
F10 TAD,TAD TAD
F11 N/A,
F12 Wipe,{WIPE}

Tad, K3TD

On 1/16/2021 12:29 PM, Tom Wagner (N1MM) wrote:
Copy/paste the entire list here. Do not remove lines you think are
unnecessary.

Tom - N1MM

On 1/16/2021 12:27 PM, Tad Danley wrote:
Running the latest 1.0.8891.0 Able to edit the function keys for CW
fine, but not able to change the labels to match. Rig is in CW mode and
S&P selected. Labels show F1 - F12 with nothing else for
F2/4/6/8/10/11, and N/A for 1/3/5/7/9/11.

73,

--
Tad Danley, K3TD


--
This email has been checked for viruses by AVG.
https://www.avg.com