Re: telnet not working


Turn off the Windows firewall to test that is the problem. Then create rules that will allow traffic to pass.





From: [] On Behalf Of John MM0JOM
Sent: Saturday, March 28, 2020 11:48 AM
Subject: [N1MM+] telnet not working


Just  set up N1MM on a new computer. All working fine that I have tested except telnet will not connect to anything. I usually use cc conecting to local port but this is not working. CC is connected to ve7cc but telnet will not connect direct to that or to RBN or anything else I have tried. Any ideas where I can start to solve this problem.

Join to automatically receive all group messages.