Re: Help on connecting RC-28, IC-7300 and N1MM Software #IC7300
Tom Wagner (N1MM)
We do not support the RC-28. That encoder, unlike most radio accessories attaches to the computer, not the radio.toggle quoted messageShow quoted text
We support tuning of the radio with the computer mouse wheel. Control keys on the keyboard can be used to alter the steps that each mouse movement tunes. This tuning varies by mode and by run/S&P status.
* *Up Arrow*– Tune radio down 100 Hz on SSB, 20 Hz on CW (adjustable
in the configurer).
o *FT-1000MP, FT-890, FT-920, FT-990 and FT-1000 and all many
+ *In S&P*– pressing the up/down arrows will turn off RIT and
tune your main VFO.
+ *In Running mode*– it will turn on your RIT and tune the RIT.
* *Down Arrow*– Tune radio up 100 Hz on SSB, 20 Hz on CW (adjustable).
o See Up Arrow information above
* *Mousewheel*– With the mouse in the Entry Window, QSY the radio
using the same increment as the Up/Down arrow keys
o *Alt+Mousewheel*– With the mouse in the Entry Window, QSY in
increments of 1 kHz
o *Ctrl+Mousewheel*– With the mouse in the Entry Window, QSY in
increments of 10 kHz
Tom - N1MM
On 2/10/2020 6:57 AM, John Bednar via Groups.Io wrote: