Re: ESM sending "Fixed Call" VS TU

Ron
 

I followed the guidance on the Flex Forum, which had me using WinKeyer AND the KY commands. It worked good as far as I knew. After wading through the advice here, Some Great, some very condescending I have deleted the KY Commands and all seems to be working excellent. The ability to stop sending mid stream is a big plus. Thanks to all who replied. Ron, WV4P

On Fri, 1 Nov 2019 at 06:55, John Bednar via Groups.Io <k3ct=verizon.net@groups.io> wrote:

Ron,

 

There are many disadvantages to using the KY commands.

Flex provides WinKey emulation. I advise that you switch to WinKey.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Ron
Sent: Thursday, October 31, 2019 8:39 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] ESM sending "Fixed Call" VS TU

 

###################
#   RUN Messages
###################
F1 Cq, {CAT1ASC KY cq ss  {MYCALL} ;}
F2 Exch, {CAT1ASC KY  # U * 17 TN ;}
F3 Tu, {CAT1ASC KY tu ;}
F4 {MYCALL},{CAT1ASC KY {MYCALL};}
F5 His Call,{CAT1ASC KY !;}
F6 Repeat, {CAT1ASC KY {SENTRSTCUT} {EXCH} {EXCH};}
F7 Empty,
F8 Agn?,{CAT1ASC KY agn?;}
F9 Nr?,{CAT1ASC KY nr?;}
F10 Call?,{CAT1ASC KY cl?;}
F11 Empty,
F12 Wipe,{WIPE}
#
###################
#   S&P Messages
###################
F1 Qrl?,{CAT1ASC KY qrl? de {MYCALL};}
F2 Exch, {CAT1ASC KY  # U * 17 TN ;}
F3 Tu,{CAT1ASC KY tu;}
F4 {MYCALL},{CAT1ASC KY {MYCALL};}
F5 His Call,{CAT1ASC KY !;}
F6 Repeat,{CAT1ASC KY {SENTRSTCUT} {EXCH} {EXCH};}
F7 Empty,  
F8 Agn?,{CAT1ASC KY agn?;}
F9 Nr?,{CAT1ASC KY nr?;}
F10 Call?,{CAT1ASC KY cl?;}
F11 Empty,  
F12 Wipe,{WIPE}

 

On Thu, 31 Oct 2019 at 19:31, Steve London <n2ic@...> wrote:

Works fine here with the latest version.

WV4P please post all of your function key definitions.

73,
Steve, N2IC

On 10/31/2019 05:55 PM, danzee via Groups.Io wrote:
> That's concerning. I use correct call as a  SOP. I'll check my setup.
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
> -------- Original message --------
> From: Ron <wv4ptn@...>
> Date: 10/31/19 6:04 PM (GMT-05:00)
> To: N1MMLoggerPlus@groups.io
> Subject: [N1MM+] ESM sending "Fixed Call" VS TU
>
> Setting up my Macros for SS I ran into an odd issue.
> Flex 6600  N1MM
> Using ESM the exchange worked properly, then I enter the info, F3 TU & Log It
> both highlighted properly.... Hitting enter Logged it BUT instead of sending TU
> it sent their call. I spent 2 hours re doing everything from scratch, rebooting
> etc. etc.
> Finally, in N1MM Config / Function Keys I un toggled "Send Corrected Call before
> end of QSO" and the issue went away. Even tho I had not changed the call it was
> acting like I had.  Ron, WV4P
>


Join N1MMLoggerPlus@groups.io to automatically receive all group messages.