Re: Icom IC-7100
toggle quoted messageShow quoted text
I don’t believe that radio has a USB computer interface so you will need a CI-V interface.
Should be as simple as selecting the COM port that the CI-V interface is connected to, the radio model, and setting the COM port parameters.
The bottom of the COM port window contains suggested settings.
Often the Icom radio auto-baud feature does not find the correct baud rate. I recommend setting the radio menu to use 19200 baud and use that in the N1MM Logger radio com port setup.
If you are using an unpowered aftermarket CI-V interface you will likely need to set DTR and or RTS to Always On to provide power to the interface.
From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Michael Ash
Sent: Wednesday, August 21, 2019 5:04 PM
Subject: [N1MM+] Icom IC-7100
N1MM is very popular, and so is the IC-7100, but has anyone succeeded in mating the two? Information on doing so would be great.