Re: FTDX-101D to N1MM+ No comms?
toggle quoted messageShow quoted text
Solution found, uninstalled com ports, reinstalled then reconnected USB cable. Ports now shown in Device manager as Enhanced Port 14 Standard Port1 5, the reverse of my previous. N1MM now connects to Port 14. Just need to get Winkeyer working now :) Thanks for all suggestions.
Aside question, Is Com 15 too high a number for N1MM?
Set the radio CAT TIMEOUT TIMER to 1000.
Set CAT RATE to 38400 and the N1MM Logger com port speed to 38400.
Yes I have tried the 'Standard ' port' John, still no connect. I have tried all can think of now, at a loss.
Early adopters remorse ;)
Did you try the “standard” port? One typically does not support radio control.
Cannot connect to N1MM+
I have installed the Yaesu drivers and connected by USB cable to the 101D which creates Enhanced port 15 and Standard Port 14.
N1MM set to FT991A, Com15, Baud rate 38400 on both 101D and N1MM, CAT Timeout set to 1000mSec.
Result no comms with N1MM.
Any help appreciated.
Join N1MMLoggerPlus@groups.io to automatically receive all group messages.