Re: Bad cw(uneven spacing)

Jim W7RY

Try moving it to a USB 2.0 port?

Jim W7RY
On 3/19/2019 9:19 AM, Girard Donald via Groups.Io wrote:

Hi John, I am using DTR and RTS and virtual com port so no connections on usb port for cw. Somehow the radio anan 10-e is acting up now. May have to redo set up. Previous messages were perfectly right... as I increase the speed it gets worse... to be continued... 

NB: it used to work fine..... 



On Tuesday, March 19, 2019, 3:59:44 a.m. GMT, Girard Donald via Groups.Io <girarddonald@...> wrote:

Thanks to all of your ideas there are very appreciated, now it used to  worke fine. As most mentioned about timing and part of the computer being busy, I will definetly looke that way and in fact now that you mentioned it, it all make sense......... to be continued...... 


On Friday, March 15, 2019, 1:35:39 a.m. GMT, John Bednar via Groups.Io <k3ct@...> wrote:



Are you using a USB to COM port converter? The converters that use a FTDI chipset work well for sending CW. The Prolific chipset based USB to COM converters have long latency and are not suitable for sending CW.


If you are using a FTDI converter with a USB Hub, bypass the hub. Connect the converter directly to the computer.


John, K3CT


From: <> On Behalf Of Girard Donald via Groups.Io
Sent: Thursday, March 14, 2019 12:23 AM
Subject: Re: [N1MMLoggerPlus] Bad cw(uneven spacing)


First Thanks for your interest, N1MM keyer, and the sdr anan 10-e has its own but the radio's keyer is working fine only the N1MM weird spacing really hard to copy. Any idea !


On Wednesday, March 13, 2019, 5:35:32 p.m. GMT, Drew Vonada-Smith K3PA <drew@...> wrote:



What is the keying method/interface?

Join to automatically receive all group messages.