toggle quoted messageShow quoted text
I encourage those of you with CW keying issues to consider how much your time is worth.
For $18 US, your problems could be solved. http://hamprojects.info/mortty/
On 03/19/2019 08:19 AM, Girard Donald via Groups.Io wrote:
Hi John, I am using DTR and RTS and virtual com port so no connections on usb port for cw. Somehow the radio anan 10-e is acting up now. May have to redo set up. Previous messages were perfectly right... as I increase the speed it gets worse... to be continued...
NB: it used to work fine.....
On Tuesday, March 19, 2019, 3:59:44 a.m. GMT, Girard Donald via Groups.Io <firstname.lastname@example.org> wrote:
Thanks to all of your ideas there are very appreciated, now it used to worke fine. As most mentioned about timing and part of the computer being busy, I will definetly looke that way and in fact now that you mentioned it, it all make sense......... to be continued......
On Friday, March 15, 2019, 1:35:39 a.m. GMT, John Bednar via Groups.Io <email@example.com> wrote:
Are you using a USB to COM port converter? The converters that use a FTDI chipset work well for sending CW. The Prolific chipset based USB to COM converters have long latency and are not suitable for sending CW.
If you are using a FTDI converter with a USB Hub, bypass the hub. Connect the converter directly to the computer.
*From:* N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> *On Behalf Of *Girard Donald via Groups.Io
*Sent:* Thursday, March 14, 2019 12:23 AM
*Subject:* Re: [N1MMLoggerPlus] Bad cw(uneven spacing)
First Thanks for your interest, N1MM keyer, and the sdr anan 10-e has its own but the radio's keyer is working fine only the N1MM weird spacing really hard to copy. Any idea !
On Wednesday, March 13, 2019, 5:35:32 p.m. GMT, Drew Vonada-Smith K3PA <@K3PA <mailto:@K3PA>> wrote:
What is the keying method/interface?