Re: FT 857D NIMM+ CW issues #n1mm
Just as another tip, I had to replace batteries in the winkeyer once to fix a similar issue. Tried that yet?
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of ve3ki <ve3iay@...>
Sent: Sunday, October 14, 2018 5:03:39 AM
Subject: Re: [N1MMLoggerPlus] FT 857D NIMM+ CW issues #n1mm
If you plug your paddle into the Winkeyer, can you send CW from the paddle? If not, there is something wrong between the Winkeyer and the radio's CW key jack, such as a bad cable, loose connection, etc.
If you can send CW from the WInkeyer using a paddle, but not using the keyboard, the problem is between the WInkeyer and the computer. After checking in the Windows Device Manager that the COM port number that Windows has assigned to the Winkeyer is COM3 , open the N1MM+ Configurer, check that there is an entry for COM3 with Radio set to None and the CW/Other check box checked, click on the Set button for that port, and make sure the Winkey check box in the port setup is checked. You don't need to change any of the other settings in this window.
On Sun, Oct 14, 2018 at 12:18 AM, Justin Tabatchnick wrote: