toggle quoted messageShow quoted text
Your question wasn't clear. I answered what I thought you were asking about.
The program stores the last frequency used per band and mode. When you return to a band, the software returns to the last used frequency. Make sure you configure Mode Control to program the digital modes correctly for your radio.
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of WA7SKG via Groups.Io
Sent: Saturday, October 13, 2018 10:12 AM
Subject: Re: [N1MMLoggerPlus] Band Panel Frequencies
This does not address the original question. How do I set the frequency the radio goes to when I select a button on the Band Panel? For instance, when I click on 20m DIG, it always goes to 14200. Nobody does digital there. Since I usually use PSK31, I want to go to 14070. So, whenever I hit 20 DIG, I have to retune the radio to 14070 and set it to USB-D. It would be nice if it went to that configuration just by hitting 20m DIG.
John Bednar wrote on 10/13/2018 01:07 AM:
Right click in the Entry window to set the bands. The modes are determined by the Category Mode selection in the contest setup dialog and the contest rules. The band selection is saved by contest name.
The radio will switch modes if you select the proper option in Configurer, Mode Control tab. The right side of that dialog will determine what mode the radio is programmed to when you click on PSK or RTTY. The left side selections determine if you want the radio mode to change.
From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of
WA7SKG via Groups.Io
Sent: Saturday, October 13, 2018 1:54 AM
Subject: [N1MMLoggerPlus] Band Panel Frequencies
How do you configure the Band Panel frequencies? When I hover my mouse
over a button it says what frequency it will QSY to. When I select PH,
it seems to go to the last frequency I was tuned to on phone. But when
I go to DIG, I can't get it to go to the digital frequency, i.e. 14070
for 20m. Instead, it goes to 14.200 for 20m Dig and 7251.12 for 40m
3995.93 on 80m DIG. It doesn't seem to matter what frequency I was on the last time I was in DIG mode. Since I predominately use PSK31, I would like it to go to 14070, 7070, and 3580 accordingly. Any way to code this or configure it someplace?
Now, to really dream, it would also be nice if, when I selected DIG, it could switch the mode of my IC-7300 to USB-D and back to USB/LSB when I go back to PH.