Re: In split sending wrong RST
This sure sounds like a case where the two VFOs are in different modes. I don't know about your radio, but with some, having both VFOs on the same frequency and in the CW portion of the band does *not* guarantee that both VFOs are in CW mode. On the Elecraft K3/K3S, for example, you have to tap the A>B button twice in rapid succession to transfer the mode to the second VFO. A single tap of A>B transfers the frequency but leaves the second VFO in whatever mode it was in previously, i.e. the two VFOs can be in different modes even when they are on the same frequency. The program detects this, and will take its mode from the transmit VFO (VFO B in Split mode).toggle quoted messageShow quoted text
---In N1MMLoggerplus@..., <gregg.w6izt@...> wrote :
Thanks for your reply. Mode control is set to Use Radio. This occurs when the radio is in split, even if both VFOs are in the CW portion of the band and on the same frequency.
From: gbyahoo@... [N1MMLoggerplus] [mailto:N1MMLoggerplus@...]
Sent: Sunday, September 20, 2015 1:47 PM
Subject: RE: [N1MMLoggerplus] In split sending wrong RST
For most contests that I operate, I find the most straight forward setting is the default: "Use radio mode".
>> Gerald, VE1DT
Uusing L+, mode=CW, when in split (both VFOs on CW) L+ auto populates the sent and rec RST as 59. When operating simplex the sent and rec RST is auto populated correctly with 599
V1.1.5176. Log type “DX”. Changing the category has no effect. Perhaps I’m missing something? Any assistance is appreciated