N1MM+ with MMTTY - NO Diddle

Fred - NA2U
 

I also now get the following error:

"COM6 is in use by another program, but the port is also configured on N1MM Logger.  The COM port will not work in N1MM Logger until this is corrected."

The only other use of COM6 is DX4WIN for CW but that program does not run at the same time N1MM is running. 

73,

Fred/NA2U

Begin forwarded message:

From: Fred - NA2U <cwman@...>
Date: March 23, 2015 at 7:16:37 AM MST
To: "N1MMLoggerplus@..." <N1MMLoggerplus@...>
Subject: Re: [N1MMLoggerplus] N1MM+ with MMTTY - NO Diddle

Good morning.

Mode sent to radio: (Radio 1/VFOA)
RTTY to RTTY
PSK to USB

73,

Fred/NA2U

On Mar 23, 2015, at 5:08 AM, "'Joe Subich, W4TV' lists@... [N1MMLoggerplus]" <N1MMLoggerplus@...> wrote:


What are your settings for "Mode sent to radio" in the Mode Control
tab of "Config | Configure Ports, Mode Control, Audio, Other ... "
==> Use radio mode

That's "Mode recorded in log" ... what is set to RTTY and PSK in
"Mode sent to Radio" (the *other* box)?

73,

  ... Joe, W4TV


On 2015-03-23 12:16 AM, 'Fred - NA2U' cwman@... [N1MMLoggerplus] wrote:
In particular, which radio button is selected in the DI1
MMTTY Setup area?   ==> FSK

What are your settings for "Mode sent to radio" in the Mode Control
tab of "Config | Configure Ports, Mode Control, Audio, Other ... "  ==> Use radio mode

73,

Fred/NA2U
"Wretched excess is just barely enough."


---------- Original Message ----------
From: "'Joe Subich, W4TV' lists@... [N1MMLoggerplus]" <N1MMLoggerplus@...>
To: N1MMLoggerplus@...
Subject: Re: [N1MMLoggerplus] N1MM+ with MMTTY - NO Diddle
Date: Sun, 22 Mar 2015 22:25:26 -0400



What settings have you selected on the "Digital Modes" tab in
Logger's "Config | Configure Ports, Mode Control, Audio, Other ... "
dialog?  In particular, which radio button is selected in the DI1
MMTTY Setup area?



Join N1MMLoggerPlus@groups.io to automatically receive all group messages.