Hello Everyone, GEO members, RIG members and RadComm members and many more I expect. I'm very sorry to have to tell you that Francis (Frank) Bell died last Thursday. Many of you will know or have met

Hello I have my new hardware up and running and I'm getting a good downlink signal. So now I'm looking for software that I can use with my Raspberry PI 3 B+ for decoding and displaying. What I'm looki

Hello All, I had a sudden jump in SNR on TP1 today from 13.3 dB to 13.7 dB at 13:51 UTC. It is still at that 13.7/.6 dB level at 15:15. The Power level did not change being steady at - 25 dBm. Sky is

Dear All, here comes the Kit for GNU/Linux amd64 as promised. It's as easy to install and use as the one for Windows. It has been developed under Debian 10 (Buster) but you should have no problems to

Recently I got a TBS 6903X and a 1,25 m. offset dish with an Inverto Black Ultra (8 meters RG6 Top quality). Using Win7 i7 16gb RAM, BDADataEx version 1.1.4.9. The signal is lock, level 77%, Quality 5

It seems that my SR! that has been in continuous use for a number of years has bitten the dust. I had an 'Out of Lock' message on my satellite PC, and on checking the dish, found corrosion had warped

Ernst, I suppose you included ‘hawaii’ in your sample script goes17.py as a training example. Added a quick area definition to areas.yaml in the pppconfig and got the attached . In case of interest, I

Hi all Here is an update on my attempt to get this card working on Windows 10 64 bit In short -it wont . Even with a clean install of Windows 10 I eventually get a BSOD pointing at tbs6909.sys the win

Hi, With the help of Graham i have managed now to receive hvs-2 on my TBS6903 through BDADataEx. and i now have sentinel data. My question is it possible From a single cable connected to the linein of

Hi I thought i would have a try with the BDADataEx with the TBS6903 and am i confused Oh i wish there was an easy to flow manual. I am setting up on tuner0 I have a green lock. Signal quality85% and L

On 11/01/2021 15:37, Graham Woolf wrote: > Hi Ernst > > I have now got my TBS6909X installed and running and now receiving data > > I am getting a lot of missed packets though I I just wondered if the

Hi again No matter what ever i try i cannot get OLCI EFR and OLCI ERR. I have permission from EUMETSAT for Copernicus data I feel as though all my settings are OK In EUMETCastView, I have selected the

Attached is the latest radar image (today) in which the parts and pieces of A68a are seen floating, leaving a huge field of small fragments in their wake. Ferdinand Valk

Dear Members Here comes the Pytroll/Satpy EUMETCast Windows Starter Kit V3.0 (YES 3.0). It should be "Childs Play" to get it working. I have double checked all the scripts on my Windows 10 Pro 64Bit P

Hello All, During the recent run of cold fairly constant rainy grey weather, my SNR has been 'lower than normal.' I did try re-aligning my dish a couple of times but to no avail. Since the rain stoppe

Dear All, I doubt that there are many of you who are involved in Windows Insider. However, let me issue a warning. Builds 21277 and 21286 prevent the functioning of BDADataEx and TBS-IPdata. I suspect

Hi, For some time now I wonder if it could be possible to receive and decode the Eumetcast data stream with software defined radio. I know it is possible for DVB-S2 broadcast television, but I never f

Movements of A68a during 3 months: http://www.alblas.demon.nl/wsat/files/NMSG4_R3G2B1Hc_201001_1600.avi This is one frame a day, each at 16:00 UTC, from 1-10-2020 till 3-1-2021. MSG4, using HRV/VIS006

Hi I have been updating all my software from David Taylor and have the latest MDM. I am curious that in MDM that i have black screens in the MSG LRIT tab. I have a working MSG HRIT , FY-2H, FY-2G, and

Hello, Since a few weeks it isn't possible anymore to download CODA/Scihub data with EUMETCastView. For the moment I am working on the problem. The CODA/Scihub API allows now to download individual pa