Perhaps this may be of help to someone... Following a suggestion from Gordon Smith (EUMETSAT) I changed the MODCOD setting on my two separate BAS and HVS-1 Ayecka receivers from BAS-only and HVS1-only

Hello All, I reported this morning that my TP 1 SNR was down a bit. I haven't been monitoring it during the day and it is still down at 22:00 - 12.9 dB where it should be around 13.8dB - Power still t

I experienced another loss of lock on the SR-1 running just HVS-2 and discovered two things: A warm reboot was all it needed to restore the lock I had set the MODCOD for both services but have now set

Hello All, I thought that because of the current satellite changes taking place that now would be a good time to move BAS & HVS-1 downloads to a more modern pc. From Eumetsat I downloaded the latest s

Folks, METEOSAT-12 is now listed at CelesTrak! It has the NORAD number 54743, which you can add to the "My Favourites" list in my Kepler Updater software. It works in WXtrack, of course, as does EUTEL

Good evening all. Ever since the afternoon HVS-2 service went low again I’ve lost transport lock. Unfortunately some of the graphs for I/O for HVS-2 on David’s page are not current but it may be I’ll

Hello All, Er, some of us - like me - have got to get moving on the use of other 'operating systems' or rather perhaps, rather, processing software I received this information from Ops a couple of day

Hello SR1 users, Can anyone please tell me what PID's were set in the GEO supplied SR1's? I can't get HVS-2 data flowing - my .ini's look OK to me, ('same' configuration as for HVS-1) so this may be t

Hello All, Everything is ready at the moment for the launch of MTG-I1 this evening. https://www.esa.int/Applications/Observing_the_Earth/Meteorological_missions/meteosat_third_generation/MTG-I1_rolled

Hello everybody, I am currently testing reception of EUMETCast backup service. On our test chain I have physically switched coax cables from a Twin LNB focused on E10A to another on HB13C, then update

Folks, EUMETSAT would like 3-5 volunteers to provide feedback on the new C3 transponder for HVS-2. They note that: "We are in testing campaign and the service can be interrupted without notice". If yo

Hi, It took some time but I managed to create a new feature in EUMETCastView, namely the creation of video's of Metesat-9/-10/-11. The 'modus operandi' is as follows : - set the General Vertical Persp

Hello All, An interesting 'interactive' brochure with technical details of MTG-I and its operations. https://indd.adobe.com/view/80cb38fc-bf13-4d48-a8f8-bc0fbbe403a5 Regards, John Tellick

Hello All, Just a quick note, today at 14:12 with clear sky conditions and outside temp of 6 degrees, I noticed my BS/HVS-1 SNR was 14.00 dB and Power -18dBm. Switching the SR1 to HVS-2 it's SNR was 1

Hello to all My message may be off topic in this group. With the scripts at Ernst, I get a large amount of images per day in different directories. Does anyone use a program or script to generate an h

The December issue of the GEO Quarterly Newsletter can now be downloaded from http://leshamilton.co.uk/GEO/newsletter.htm

Using Meteosat Third Generation data - Florence Rabier Interview with the European Centre for Medium-Range Weather Forecasts (ECMWF) Director-General, Florence Rabier, about the benefits of the MTG sa

Hello, I have seen a few posts mentioning the RPi for processing some satellite imagery, however there may be RAM constraints, even with the 8GB version. I'm checking the market now and then and it se

Dear All, up to now I had only timeliness minimum/maximum values in seconds. For users who try to adapt my cron.cmd in SPS V4.0 (Beta) I have measured and plotted timeliness for all useful EUMETCast c

Good day all. With David’s help again my system is almost running successfully on my new settings using TBS dual mode for basic and HVS-1. The SR-1 is also back in business on the new HVS-2. But the t