Dear All, here comes my "Satpy Processing System" (SPS) V 4.1. While V 4.0 was labeled as "Beta", I hope V 4.1 now deserves the name "Stable". Sorry for distributing this once more with wetransfer. I

no eumetcast HRIT files since 21.15 21.1.23 anyone else the same?

All, a new (Beta) Enensys firmware has been installed and is currently tested by Telespazio on HB13C. https://www.eumetsat.int/reception-testing-eumetcast-europe-backup-satellite This is again the VCM

All, Just to say I saw some SNR changes this morning around 11:00 UTC. At 10:00 this morning my TP 1 SNR was 13.7 dB under clear skies. I happened to notice around 10:57 it had dropped to 13.1 dB stea

I have a problem with running tellicast on a Lubuntu 18.04 system. This is on a dual-boot PC (32-bits); the other OS on this PC is Ubuntu 16.04 which works fine with exactly the same Tellicast-scripts

I had to change the heading as I didn't receive my original message to the group (password problems). Thanks for the replys. I am using rx1 for BAS and was hoping to use rx2 for HVS-1. I didn't realis

Just in case anyone missed it from the UNS: "Maintenance of EUMETCast Europe service is planned on 19/01/2023 from 10:00 UTC to 11:00 UTC. No impact is expected but a low risk of interruption on EUMET

Ernst, Thanks for the information. We are good with the current MSG RSS (which is on a 3-day interruption), my main question is information with the future MTG RSS. Sounds like there is just the test

Hi, Does anyone know if MTG data is currently available through EUMETCast? Is data currently being transmitted down on 10A Transmitter C4, we currently receive the basic service and are wondering if w

Rapid Scanning service interruption - Jan-17 to Jan-20, both at 09:00. https://www.eumetsat.int/rapid-scanning-service-schedule This is listed as 72 hours, not the usual 48 hours. Cheers, David -- Sat

Hello All, After a 2 year break in receiveing wx sats I am trying to catch-up and update my system. I have an Ayecka SR1, the software is up to date V1.05b264. The firmware is 2.02b922, Eumetsat docum

David, I have a query concerning link margin reporting on a new TBS6908 card. - I include separate .inc files into the mrtg.cfg for lm, snr etc. - my TBS6808 has currently three wired connections to t

From NOAA: "This is a final reminder that GOES-18 will be declared the Operational GOES-West satellite tomorrow, Jan 4, 2023 at 1800 UTC. In addition, while not considered the Operational West satelli

It looks like the C10 transponder for HVS-2 was switched off around 11:00 this morning (2023-Jan-02): http://darlington-weather.uk/MRTG/mallard-bdadataex-lm.html Everyone else looks to have changed: h

Ernst, modifying Geostuff.py….I end up in a dead end…and I have recharge the original file you provided in SPS 4.1 packet.. I tried but I have no idea where and how I have to write your indications. I

Dear PyTROLL/Satpy users, here comes version 4.0 of my Satpy scripts for EUMETCast. I call these "Satpy Processing System" (SPS) and you name it: There are two directories C:\SPStools and D:\SPSdata.

Hi folks, I am having to rebuild my Windows reception and processing PC, due to the Windows 7 one finally giving up the ghost. My local computer shop has offered the above motherboard, with an Intel i

Hello All, I posted recently that I was not receiving data via HVS-2 TC - having switched polarity and had my request for data actioned by Ops. Having then set PID 610 on my SR1 (which had not been se

Hello all, Could someone please enlighten me as to when images from this satellite could be available via EumetCast. My reading of EumetSat information seems to indicate that the transmissions will be

Morning All and a Happy New Year to the Group, can anyone tell me which is the best software to decode HVS-2 iMAGES, TBS-6903 working well with the new system and receiving data, but not sure which is