All, I'm seeing + 1 dBm on my SR 1 Power reading this morning but no change in Es/No level, which remains at the usual morning clear sky level reading. Mind you, I don't know what the 'Power' reading

Hello all, Please forgive me if the answer to my query is so obvious to you. I am running AVHRR Manager on a pc with Windows 7 Pro and my E1H-EPS-10 BZ2 files are downloaded and stored on another pc r

The free Win-7 to Win-10 upgrade still works, as Simon recently confirmed.... https://www.sdr-radio.com/windows-upgrade Cheers, David -- SatSignal Software - Quality software for you Web: http://www.s

Hi David As of 12/12/2019 I am getting a build up of unprocessed data in EUMETSAT Data Channel 8 on the receiving PC of Aqua_MODIS.A2017212.L3m_DAY_SST_sst_4km.NRT.nc looks like there has been a chang

For those taking the above data, be aware that there appears to be a date issue with some of the data which is being saved through Data Manager as 2001. This seems to have commnced from 01/01/2020. Ev

All, Ah good. Well, not, really. I've just accessed David's EUMETCast Europe reporting page and found that everyone is experiencing 'dropped' SNR. Mine was down to 9.7 dB earlier which caused HVS-1 to

David, The imaging services of MSG-4 will be replaced with MSG-2 data in the period of January 13 to 20. Can RSS holiday be used to cover the change by having the source path pointing to [drive]:\EUME

Hello Been offline for a while but slowly systems are coming back to life. Just updated to latest EUMETCastView (1.4.7) but program crashes when 3D globe is selected, also had that problem in earlier

Just a reminder to all that the Rapid Scan service stops tomorrow for 4 weeks without any RSS cover from Met-9. Also during the outage period both Met-11 and Met-9 will be off at different times for 1

I am seeing a substanial drop in signal over the last 30 minutes or so. I had noticed a drop of about 0.5 SNR a few hours ago, but at the moment it is over 3 SNR in relatively clear conditions here. S

Processing ok up to closing down 22.23 on 31.12.19 but when restarted 06.19 on 1.1.20 and today no processing taking place. Is there a reason for this? Regards Frank

I for got to say before the installer stops with error 1920 it does install drives then the services but stops when it try's to start this service SACSrv , i have tried to start the service manualy in

Hello, i tried eumetcastview for Sentinel 3 imaging and for S3A or works well but for S3B it doesn't. No segment are shown, not matter what i try. I use Segnents from Hvs2 stream. Regarding the inform

Help please the EKU broke & OPS have sent a new black one that only works with the new software Safenet 9.0. I can not get this to load on XP pro sp2 HAS ANYBODY got this working on XP ? The new Telli

Hello, I've been running my reception station on 64bit Linux for a couple of years now and I even upgraded my PC to a decently powerful Haswell Core i5 with 8 GBs of RAM. While Tellicast introduced a

I am trying to run this program but without success. It was fine until a few weeks ago when one day it decided to stop working. I have re downloaded it, replaced, changed its location (in which case I

My Bracknell map is not registering correctly in GSS . It plots 2 degrees North and 4 degrees W of its correct position - putting the meridian (roughly) through Fishguard. Can't find any settings that

Dear all Here is my HOWTO version 0.2. Meanwhile Christian Peters has managed to do what I describe. I hope my effort and paper proves useful for others as well. Many thanks to Hugo for his support. R

Hi guys, today my hvs1 and hvs2 data has been activated by eumetsat. I am flashed about the the huge different kind of data packets and i wonder how to process them an which software i should use. I a

From EUMETSAT: The user day presentations are available now on the below link https://www.eventsforce.net/eumetsat/frontend/reg/tAgendaWebsite.csp?pageID=2939&ef_sel_menu=58&eventID=8&mode= Click on A