Just to report on an installation of the 2.3.1 version. As one or two others have reported it comes with the e-token software. The first installation attempt went OK until the last part, and I admit I

David, I seem to be missing segment 6 from all images 1100 onwards (I do not know about before as I have only just restarted everything.) and a few other segments. Is this my problem or are they not b

I think best just to close down until the channel 2 problem (started about midday) is resolved. No software could deal with this ! Regards Douglas.

Guys, Has anyone else picked up a circular outine on the 1145 and 1445 CLAI images? I'm assuming that's the sun causing it? I have the same outline on yesterdays images as well. I only have 3 days wor

Well, I must admit to being mystified. I have been monitoring the receive computer and it consistently shows memory usage of about 130Mb (very small proportion) and an average CPU of 1 to 2% with few

Having just moved from a V2.3 hardware with V2.4.2 (?) software to a V2.6B card with the V4.2.8 drivers, I have found that, as others have reported, the signal level indications are completely differe

David, I've been preoccupied with other things for a few days so have rather lost the thread on missing segments. I am still losing enough to make the system almost unusable and animations impossible.

just to throw in another idea - I wonder if frequency drift is playing any part here? The B2C2 receiver cards have a Xtal osc and should be quite stable; but as I understand LNBs they don't have a Xta

Hi I have one of RIGs 1mtr dishes with the coffee can on the end, can this be used for the reception of MSG, and if so what other items are required? It seems a waste to get rid of it only to replace

Speaking from a position of ignorance, what is meant by "Signal Quality" in the Transponder Status display? It seems to be rather like the S-meter in amateur radio, an arbitrary indication of signal s

Looking at the emails over the last few weeks it appears that there are many more problems with the set up that is beeing attempted. Has any one asked Eumestsat what they are recieving and if the same

We seem to be missing something here. I've been running a single PC system (Athlon 2200+, 1Gb memory, Raid 0 disks, XP Pro) and never really checked missing segments assuming that I would naturally mi

Hi I had my dish (88cm) mounted at the rear of the garage last Saturday and it appears that since then I have lost far more segments than previously and the signal quality although most of the time ar

A lot of members are having MSG reception trouble at the moment. Looks like part of these problems are caused by Eumetsat, but others not. Yesterday I installed a DVB viewer on my receive PC. This way

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the MSG-1 group. File : /Installing ProgDVB viewer for Skystar2.pdf Uploaded by : a_van_b

All I have just come back on air about 2 hours ago. I have changed from a PCI WiFi card to an ethernet driven WiFi access point (WAP). My reasoning was that if the amount of data from MSG had increase

Very quiet on the list, is everyone watching TV on HotBird now ? Today I had no missing segments up to 2230 But I do see a lot of late segments in the report and somehow I miss image HRIT ch09 0830. G

Spoke too soon!! 1015 Ch 12 lost seg 16,17 1045 ch12 lost seg 20 1100 ch 1,2,3,4,7,8,9,10,11 lost seg 6 ch12 seg 20 Note ch 5& 6 ok 1115 ch 1-11 seg 6 ch 12 seg 16,17 This is a pattern I have seen bef

hi everyone, since some days i have some troubles getting all segments. the specs of my receiving system are: 1.2m kathrein dish 2.4Ghz 1GB Ram 160GB HD winxp pro tellique 2.3.0a skystar 2 dvb card wi

hi everyone, since some days i have some troubles getting all segments. the specs of my receiving system are: 1.2m kathrein dish 2.4Ghz 1GB Ram 160GB HD winxp pro tellique 2.3.0a skystar 2 dvb card wi