I am wondering what the outcome of this Dissemination Trial will be. It could have a big impact on the attitude to the provision of high resolution data, but on the other hand, commercial consideratio

Hi all, This morning when I checked the wxsat computer I found MDM stuck at the 0315 cycle. The tray showed a host of tellique icons which quickly disappeared leaving no tellique icon, but the green r

Hello All, I had a problem while processing HRV segment 17 from cycle 0900. MDM (version 122.231) was halting with CPU usage 99%. After an hour there wasn't any progress so I killed the process. A rep

Hello, My system has not received any FSD for a few days now. Could someone tell me the PID for FSD? I can only find data on HRIT, LRIT and EARS in TD-15. Many thanks, Paul

Hi All, Oh am I having problems here! I have swapped over to a two PC system, having XP Pro on one machine and 98SE on another. The intention being to collect raw data using Tellique/98SE and process

... seems to have stopped at 18:07. Usually, if I post a message saying that, data resumes shortly afterwards, Fingers crossed! David

David, My collection computer has been running since late Friday 10 October. The computer that runs MSG Data Manager was turned on yesterday ( It is used for other jobs with occassional bursts of MSG

After reading the RIG article and living on the US east coast, I am interested in setting up a MSG system. Is anyone receiving this way yet? I could use a little help on this type of receiver and card

David, I have this but on the 0815 cycle where all HRIT/LRIT channels have segments 2 4 5 6 7 8 are missing, segment 3 has the first few lines missing and the 0830 cycle is missing . HRV all except 1

Back on but from experience you may need to re-boot in the correct sequence if segment loss is to be avoided. The outage was about 10 mins with some questionable in/outs just prior to that. Douglas.

Unless some unexpected has happened at this end it looks as if the 11096 transponder is down. Red icon on the taskbar for the DVB but only on that frequency and TV channels on that transponder also do

I just checked signal level of my DVB and it 60%, as usual. I live near Milan and my dish diameter is 60cm, transparent plastic esternally. I can not say anything else, since I just sent my request fo

Just to clear up any misunderstanding the missing segments in the 17.00 and 17.15 UTC scan were due to a Hotbird transponder failure not Eumetsat. The problem lasted about 10/15 mins as I previously r

For those new to MSG the out of position 24th segment on the 08.00 UTC scan is probably a prelude to a northern section scan change on the HRV channel. The 08.30 may be changed. Douglas.

David, I took the LRIT PID out to reduce hard drive usage on my receive PC. That explains why FSD also stopped. Many Thanks, Paul

All, An American enthusiast posted a request on WXSAT-L for information regarding LRIT receiving systems and I offered some suggestions. For those not subscribed to WXSAT-L may I post my reply here wh

Folks, it seems that (possibly following a security update this morning) I can no longer use the Reply function in the Web interface to the Yahoo groups. If anyone else has the same problem - e-mail m

Hi all, This morning at 0653 UTC, the tellique software shut itself down after having problems with the child process, almost identical to that which I had a few days ago and reported here. I did not

OOPS! Must have dropped off last time! VRB:2003-10-18 20:35:01.699:Received file 3f91a3eb00296a58 on channel `EUMETSAT Data Channel 2' VRB:2003-10-18 20:35:01.829:Delivered file `received\H-000-MS