Listing the available composites for MTG I get: 'airmass' 'ash' 'cimss_cloud_type' 'cimss_cloud_type_raw' 'cloud_phase', 'cloud_phase_distinction' 'cloud_phase_distinction_raw' 'cloud_phase_raw' 'clou

Ah, found the reason. Using area seviri_0dg with MTG gives you MSG resolution. Using mtg_fci_fdss_1km, you get full resolution... And there is also mtg_fci_fdss_2km, mtg_fci_fdss_6km and mtg_fci_fdss_

Another one about test data of MTG: Size of VIS images is 11136x11136, but satpy creates images of 3712x3712. Somewhere the image is resized? That's not done explicitely in the script I use. The image

To add to that: if IR channels are used in combination with VIS channels then downsampling to 5568x5568 can be expected, but not to 3712x3712?

Dear Group, firstly this is my first post and hope to learn a great deal from this forum and also supply information that may be useful to others. I’m generally a radio ham interested in Satellite com

Hello, Being adventurous, I upgraded my Eumetcast receiver PC to the latest Ubuntu LTS release. However, as I expected, it did not go exactly smoothly. Since pcscd depends on libgtk2, I installed it.

Hello All, Interesting problem today when I had time to look at the weather.at lunchtime. Lots of red X's and messages, loss of screen 2 and several SatSignal programmes 'shutdown,' some still working

I have perfect reception of the basic service in spite of my poor SNR (discussed at length recently). More out of curiosity than the expectation of any results, I tried HVS-1 – and have nothing. Just

Hello All, The launch of the first MTG imaging satellite is only a few months away and ground based operations have been gearing up to be ready. https://www.esa.int/Applications/Observing_the_Earth/Me

David. my station will be offline until August 25th. holidays Robert SP7RB 73 Wysłane z iPhone'a

Just noticed that GOES-18 data has commenced again at about 18.30 BST having been unavailable for over 3 days. Regards Ian.

Hi all, This morning, when I was trying the Python script for the Metop B/C passages, I have read an error: No supported files found. Please, how can I resolve this problem? In the quote, the log sess

Ernst (and others) last night I acquired Metop-C imagery, so maybe we have solved the dish-pointing issue - or are close to a resolution. Fingers still crossed. Robert

Lovely sun glint between Florida and Cuba today (photo-reduced image). Robert

I have updated the satpy scripts for polar satellites. Using an option '-histtle' the date of the tle is compared to the date of used data; if needed the right tle is downloaded from spacetrack. This

I now have IODC flowing very smoothly. Robert

A lot of effort by two engineers this morning resulted in raising the SNR to 8.2 I’m getting perfect HRIT imagery and broken RSS. Metop-B seems to be in a loop repeating the same GAC pass over and aga

A reminder that it's the monthly 48 hour Rapid Scan interruption next week: https://www.eumetsat.int/rapid-scanning-service-schedule "These temporary outages in the service are used to exercise the Me

While it’s very disappointing to be without access to all the good things coming down from Eutelsat 10A and data yet to come, nevertheless I do have some reception at 6.2 SNR. HRIT images are being re

Hi David I see that GOES-18 is about to be disseminated over Eumetcast https://www.eumetsat.int/parallel-dissemination-goes-18-abi-data Will there be an update to the GOES ABI Manager to take the data