I have a 90cm dish and a horizontally polarised LNB. The receiver is a AYEDKA SR1and the coax is connected to RF1 input. I am presuming that i need to purchase a new dual polarisation LNB and run anot

Hello everyone, I join this useful group after having finally set up the reception of the EUMETSAT data, for which I am using the xrit2pic software. I want to report a problem that occurs regularly wi

I last used MSG Data Manager on Dec 11 last year without a problem. Starting today with no changes to the PC MSG Data Manager says no MSG files found in the data folder despite the received data folde

And one remapped version of Hunga Tonga’s eruption

A Meteosat-11 SEVIRI decontamination is planned from 17 to 24 January 2022. https://www.eumetsat.int/upcoming-meteosat-11-seviri-decontamination-2022 My best guess for MSG Data Manager users: https://

I have a 90cm dish and a horizontally polarised LNB. The receiver is a AYEDKA SR1and the coax is connected to RF1 input. I am presuming that i need to purchase a new dual polarisation LNB and run anot

Animation from data processed with my GeoSatSignal software. Data from JAXA's Himawari-8 satellite over EUMETCast, processed by my GeoSatSignal software. Cheers, David -- SatSignal Software - Quality

Hi All, This volcano eruption can now be observed with Himawari-8 and GOES-17. Point your software to latitude -20.57 (South) and longitude -175.38 (West). Cheers, Ernst

Hugo, I have been having fun with your fantastic bit of software. I can view all the data i have and have produced some lovely satellite images. The only part i do not fully understand is in the toolb

Hi folks! I downloaded and installed EumetCastViewer 64Bit from Github on Win10 64bit. It crashes immediatly after the start on both machines (Server2008r2 64Bit and WIN10 64Bit). There is one message

Good day to the group Following the installation information of the Eumetsat TBS6903 card, I cannot make two Running Dual BDADataEx work. Someone did it, and how they did it Thanks if you can give me

Yesterday For the first time in a few weeks I used EUMETCastView to visualise FY-3D data. Firstly I was extremely surprised to find that none of the data appeared to cover Europe, and also I was unabl

Hi Ernst or anyone I am having a go at using PyTroll/SatPy and have printed out and am using the very detailed but easy to follow instructions All was well until i reached my first stumbling block Aft

A Meteosat-11 SEVIRI decontamination is planned from 17 to 24 January 2022. During the Meteosat-11 decontamination period, no Meteosat-11 data will be available. Meteosat-9 Full Earth Scan (FES) data

Hi all and Merry Christmas I have been working through installing and making MRTG work with my Ayecka SR1 on windows. I have gone through the whole procedure and produced a mrtg.cfg file but when i us

Happy New Year to All. This year I have set a challenge to set up a geostationary weather satellite system. Looking to receive EUMETCAST and then do some PyTroll/SatPy. I have been receiving NOAA orbi

Hello all, When I run mrtg.cfg for AyeckaSR1 The traffic analysis will be for the combined HVS-1 and BAS services. Is there any way to have a traffic analysis separately, one traffic analysis for BAS

Hi David A very happy New Year to you I was wondering - with the upcoming changes to the Basic Service and renaming of channels etc as described here https://www.eumetsat.int/eumetcast-basic-service-c

Dear community We’ve just installed a Novra S400Pro DVB-S2 receiver connected to a Satellite dish for the reception of EUMETSAT products. The interface is configured to forward the entire stream to a

Hello everyone, Actually I am running two units. Ayecka SR1 for BAS and HVS-1 and TBS-5927 for HVS-2. I would like to run the MTYG for both. I have already set for the Ayecka And have a doubt how to c