Folks, The clock is now ticking - with the final transmission of the old HVS-1 service planned for December 23. This year! https://www.eumetsat.int/eumetcast-europe-service-transponder-migration By th

David I am using the Ayecka SR1 at the moment for basic/HVS-1 service and the setting is for 18v. Is vertical not 13v. Regards Ian.

Hi all, Wasn't sure whether to reply to one of the specific threads or just go with a new one - but going with the latter. On my previous Inverto White Tech C120 quad LNB, since replaced after finding

Hello All, Did we miss this? Not that it will presumably not make any different to users - yet. https://www.eumetsat.int/new-uplink-service-eumetcast-europe Also - and "please do not adjust your set"

Folks, while browsing through some recently downloaded docs from Eumetsat and Ayecka and looking here and there in the SR1 via telnet, I stumbled over an entry 'Air IP', here set to 192.~.161 . That t

Hi all, I feel like I've missed something painfully obvious but I've dug through the config files and scripts and can't seem to find what I'm missing. When I've tested HVS-2 on 11263 V or the HB13 ser

Unfortunately the Metop scripts don't work for AVHRRL1 data files from Internet. This is for V3.0, but as far as I can see also the case for v4.0. These files have 90 minutes in one file; nearly 500M

SpaceX is targeting Monday, November 21 for launch of the Eutelsat 10B mission to a geosynchronous transfer orbit from Space Launch Complex 40 (SLC-40) at Cape Canaveral Space Force Station in Florida

Folks, I'm getting complaints about the number of messages relating to 'Satpy Processing System" (SPS)' and I know a small number of folk have left the group as a result. Groups.IO has the ability to

Return-Path: <sentto-10851300-5-1061541007-Ulrich.Kliegis=netsurf.de@...> Delivered-To: Ulrich.Kliegis@... Received: (qmail 3680 invoked from network); 22 Aug 2003 08:30:09 -0000 Received: from n34.gr

As far as I understand in Satpy position of each pixel is done using a table present in the data files (not only subsat but also in 'x'-direction). Each Metop file also contains TLE info, making it po

Hello All, Due to Covid, I have been off from the PC, Now I am back and seeing messages talking about migration and other. Please anybody can tell me what’s going on and what I need to do? Actually I

Hello, May I ask for your help, please ? I am at home in Northern Bavaria and have been enjoying Eumetcast for quite some time, mainly its basic service via the Ayecka SR1. A short while ago I suddenl

All, I had this back from Ops yesterday regarding the sudden reduction in the TP 1 SNR level the other day which I reported to them. Thank you for the information and feedback you have provided, It wa

I'm seeing the level varying on TP1 (C4) across Europe, so I guess this is EUMETSAT tests in relation to the new HVS-2 transponder C3. If it's just a level change it confirms something I've suspected

David, Thanks for the advice and the link to your useful and comprehensive 'Windows 10 problems' page. Fancy having to have advice as to sorting out problems caused by an update to ones operating syst

During the tests I've just reported on, I thought I would take a look at the signals provided by the old and "new" HVS-2 transponders. - The Spectrum Spy plot in the lower waterfall window shows the n

EUMETSAT have confirmed that the new C3 transponder is in test mode since Friday 2022-11-11 at 15:20. They are also seeing SNR degradation since the switch-on. Here's a comparison of the existing BAS/

All, Just to report that 11.263 V appeared to be off around 15:20 UTC this afternoon - or perhaps I didn't wait long enough for it to lock up. This evening at 19:50 I'm getting 12.6 dB SNR and -21 dBm

The new HVS-2 feed on the vertically polarised 11236 MHz transponder has been active since yesterday afternoon as I reported on Twitter, and Douglas has found that it's carrying Sentinel data. It may