-----Messaggio originale-----
Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di David J Taylor
GM8ARV ?????????????? ???? via groups.io
Inviato: mercoledì 16 novembre 2022 20:03
A: MSG-1@groups.io
Oggetto: Re: [MSG-1] What to do?

On 16/11/2022 18:00, Vincenzo Mone wrote:

Hello All,

Due to Covid, I have been off from the PC,

Now I am back and seeing messages talking about migration and other.

Please anybody can tell me what’s going on and what I need to do?

Actually I am receiving the BAS and HVS-1 signal with the Ayecka SR1

And the HVS-2 signal with the TBS5927.

Do I need to turn the dish in different position?

Do I need to set something different in the Ayecka SR1 and/or TBS2927???

Any help will be really appreciated.

Thanks

73 de Enzo IK8OZV

Enzo,

Please see:
https://www.eumetsat.int/eumetcast-europe-service-transponder-
migration

Assuming you have two feeds from your dish, a dual or quad LNB, all you may
need to do is to retune your TBS5927. If you only have one cable you will
need to buy a dual or quad LNB and connect one lead for BAS/HVS-1 and the
second for HVS-2. I hope that no dish pointing changes are needed.

73,
David Gm8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv

-----Messaggio originale-----
Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di David J Taylor
GM8ARV ?????????????? ???? via groups.io
Inviato: giovedì 17 novembre 2022 12:06
A: MSG-1@groups.io
Oggetto: Re: [MSG-1] What to do?

On 16/11/2022 19:28, Vincenzo Mone wrote:

Hello David,
first thanks for your quick reply.
Apologise but I forgot to mention in the previous message that I use
ad LNB An Inverto Black Ultra Twin HGLN on that has two outputs. One
feeds the Ayecka for the BAS and HVS-1 Services and the other feeds the

TBS5927 for the HVS-2 Service with a 100 cm dish.

Apologise you've said that: " Assuming you have two feeds from your
dish, a dual or quad LNB, all you may need to do is to retune your TBS5927".
Please can I know how to retune it?
Thanks


73 de Enzo IK8OZV

Enzo,

Please follow the instructions for the software you are using, either the
BDADataEx or the TBS software.

Polarisation: Vertical, Frequency: 11263 MHz.

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv

-----Messaggio originale-----
Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di David J Taylor
GM8ARV ?????????????? ???? via groups.io
Inviato: giovedì 17 novembre 2022 20:02
A: MSG-1@groups.io
Oggetto: Re: [MSG-1] What to do?

On 17/11/2022 17:37, Vincenzo Mone wrote:

Hello David,
just a doubt I have and I hope you will clear it.
Actually I am receiving the HVS-2 service with the TBS5927 with these

parameters:

Satellite: 0100 Eutelsat W2A (10.0E)
LOF 1: 9750
LOF 2: 10600
Diseqc: Diseqc NUL
Transponder: 11388.H.33000
Frequency: 11388
Polarity: Horizontal
SymbolRate: 33000
Code: 0
Code Type: Gold Code.

My question is: do I need to create a new instance for HVS-2 with the
new data Or I need to modify the existing one with the new data.
Thanks

73 de Enzo IK8OZV

After the parallel running starts (Nov.24) just alter the parameters. No need
for a second instance.

https://www.eumetsat.int/eumetcast-europe-service-transponder-
migration

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv