PyTROLL/SatPy Starter Kit V3.0
|
Ernst Lobsiger
Dear Members
Here comes the Pytroll/Satpy EUMETCast Windows Starter Kit V3.0 (YES 3.0). It should be "Childs Play" to get it working. I have double checked all the scripts on my Windows 10 Pro 64Bit PC that got the files readonly from a SAMBA share Z:. My definition of "Childs Play" remains the same as for V1.0: 0) You know that you have Windows 10 64Bit 1) You are not completely new to EUMETCast 2) You read and follow the HOWTO inside (RTFM) 3) You know where you find your satellite files All scripts have been developt under Debian 10 GNU/Linux. An almost identical Starter Kit for this OS will follow soon. Have fun Ernst
|
|
|
|
Ferdinand Valk
Ernst,
Thanks for all the work you’ve put into this. I see that you’ve made quite some standardization, which will make communication between users a lot easier as they’ll all sing from the same sheet of music. I’ll comment later after having gone through it all.
Cheers, Ferdinand
From: MSG-1@groups.io On Behalf Of Ernst Lobsiger via groups.io
Sent: Friday, 08 January, 2021 22:34 To: MSG-1@groups.io Subject: [MSG-1] PyTROLL/SatPy Starter Kit V3.0
Dear Members
|
|
|
|
Hartmut Schulla
Hi, Old Farts! Ernst, you forget to mention, current users of miniconda have to deinstall python miniconda first! I started a clean install and everthing works fine. Regards Hartmut
Von: MSG-1@groups.io <MSG-1@groups.io>
Im Auftrag von Ernst Lobsiger via groups.io
Dear Members
|
|
|
|
Hugo
Thanks Ernst, I'am certainly going to try it ...
Kind regards, Hugo
|
|
|
|
Ferdinand Valk
Hartmut,
Current users => I don’t understand why python would have to be deinstalled. It all works perfectly well on the existing platform. Satpy was the only upgrade (v0.25.1 iirc). I did rename the existing EMCdata and EMCtools directories to []-Old, so that I have temporarily access to adaptations I made, but no deinstall of any kind was needed. Ferdinand
From: MSG-1@groups.io On Behalf Of Hartmut Schulla via groups.io
Sent: Saturday, 09 January, 2021 09:01 To: MSG-1@groups.io Subject: Re: [MSG-1] PyTROLL/SatPy Starter Kit V3.0
Hi, Old Farts! Ernst, you forget to mention, current users of miniconda have to deinstall python miniconda first! I started a clean install and everthing works fine. Regards Hartmut //snip
|
|
|
|
Hartmut Schulla
Hi! If you are on Python Miniconda 3.7 you should upgrade to 3.8 (latest version) ! Regards
Von: MSG-1@groups.io <MSG-1@groups.io>
Im Auftrag von Ferdinand Valk
Hartmut,
Current users => I don’t understand why python would have to be deinstalled. It all works perfectly well on the existing platform. Satpy was the only upgrade (v0.25.1 iirc). I did rename the existing EMCdata and EMCtools directories to []-Old, so that I have temporarily access to adaptations I made, but no deinstall of any kind was needed. Ferdinand
From:
MSG-1@groups.io On Behalf Of Hartmut Schulla via groups.io
Sent: Saturday, 09 January, 2021 09:01 To: MSG-1@groups.io Subject: Re: [MSG-1] PyTROLL/SatPy Starter Kit V3.0
Hi, Old Farts! Ernst, you forget to mention, current users of miniconda have to deinstall python miniconda first! I started a clean install and everthing works fine. Regards Hartmut //snip
|
|
|
|
Ferdinand Valk
Ah, that is what you meant. I had done that already and forgotten about it. Thanks for the clarification. Ferdinand
From: MSG-1@groups.io On Behalf Of Hartmut Schulla via groups.io
Sent: Saturday, 09 January, 2021 09:36 To: MSG-1@groups.io Subject: Re: [MSG-1] PyTROLL/SatPy Starter Kit V3.0
Hi! If you are on Python Miniconda 3.7 you should upgrade to 3.8 (latest version) ! Regards
Von: MSG-1@groups.io <MSG-1@groups.io> Im Auftrag von Ferdinand Valk
Hartmut,
Current users => I don’t understand why python would have to be deinstalled. It all works perfectly well on the existing platform. Satpy was the only upgrade (v0.25.1 iirc). I did rename the existing EMCdata and EMCtools directories to []-Old, so that I have temporarily access to adaptations I made, but no deinstall of any kind was needed. Ferdinand
From: MSG-1@groups.io On Behalf Of Hartmut Schulla via groups.io
Hi, Old Farts! Ernst, you forget to mention, current users of miniconda have to deinstall python miniconda first! I started a clean install and everthing works fine. Regards Hartmut //snip
|
|
|
|
maurizio.calvitti@...
Many thanks Ernst, Of course I’m going to try 3.0 and let you know the outcomes!!
Cheers, Maurizio
Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di Hugo
Thanks Ernst, I'am certainly going to try it ...
|
|
|
|
Hartmut Schulla
Hi Old Farts! Metop is also working with eps-gbl! Thank you Ernst! Regards Hartmut
Von: MSG-1@groups.io <MSG-1@groups.io>
Im Auftrag von Ernst Lobsiger via groups.io
Dear Members
|
|
|
|
Ernst Lobsiger
Hartmut,
toggle quoted messageShow quoted text
a very nice image. In the middle you see the East-West glider racetrack where I flew my FAI 500km with a Cirrus 77. This was Trieben --> Lanzen Thurnau --> Gerlos Pass --> Trieben. Unfortunately that's long ago, it remains the Club. Cheers, Ernst Am 09.01.2021 18:36, schrieb Hartmut Schulla via groups.io:
Hi Old Farts!
|
|
|
|
Daniele Guardigli
Hi, Where can I find the starter kit? Thanks
Il sab 9 gen 2021, 09:10 Ferdinand Valk <fvalk@...> ha scritto:
|
|
|
|
Ernst Lobsiger
On Sat, Jan 9, 2021 at 12:21 PM, Daniele Guardigli wrote:
At the start of this topic (but I'll not help you to unzip it). Ernst
|
|
|
|
Graham Woolf
Hi Ernst
Thanks very much for all your efforts I have spent all day today re-installing Windows to a version that will work with BDAData ready for my 6909X arriving on Monday Will try the new kit at some stage Regards Graham
|
|
|
|
Douglas Deans
On 09/01/2021 21:40, Graham Woolf wrote:
Hi Ernst======================================================================= Good luck with that Graham. The things we do for our hobby. I will be following your efforts with the 6909X with great interest and may well follow you down the same path. Look forward to your updates. Hope it all goes well. Stay well. Kind regards, Douglas.
|
|
|