Topics

Not connecting to data channels


Roger Mawhinney <roger@...>
 

My Tellique software (Html shell) shows I am receiving announcements OK and
that the system is trying to connect to data channels 2 & 3. The log file
shows a new key issued, an attempted connection and key expired, but no
channel data is received.

The IP address for the card is 192.168.238.238 and my user name and ID have
been verified and entered into Tellique recv.ini. I have reinstalled the
software and the DVB card, even changed PCI slots all to no avail. The
system was working up to the point where I decided to reinstall it!!

What should I try next?
Thanks
Roger


Douglas Deans <douglas@...>
 

----- Original Message -----
From: "Roger Mawhinney" <roger@mawhinney.uk.com>
To: <MSG-1@yahoogroups.com>
Sent: Friday, September 05, 2003 8:03 PM
Subject: [MSG-1] Not connecting to data channels


My Tellique software (Html shell) shows I am receiving announcements OK
and
that the system is trying to connect to data channels 2 & 3. The log file
shows a new key issued, an attempted connection and key expired, but no
channel data is received.

The IP address for the card is 192.168.238.238 and my user name and ID
have
been verified and entered into Tellique recv.ini. I have reinstalled the
software and the DVB card, even changed PCI slots all to no avail. The
system was working up to the point where I decided to reinstall it!!

What should I try next?
Thanks
Roger
Long shot .... When you load up Setup4PC and select data services do you
have :-

1. PID's 100,300.301 and 512 decimal
2. Under provider name you should see IP CastEumetsat
3. Under Transponder you should see 129 : 11096 MHz.

Hope you find the problem.

Regards
Douglas.


Roger Mawhinney <roger@...>
 

Douglas, Thanks very much - you were spot on. My standard Tellique
installation did not have the PIDs 300 and 301.
Roger

|

|-----Original Message-----
|From: Douglas Deans [mailto:douglas@dsdeans.freeserve.co.uk]
|Sent: 05 September 2003 20:16
|To: MSG-1
|
|
|----- Original Message -----
|From: "Roger Mawhinney" <roger@mawhinney.uk.com>
|To: <MSG-1@yahoogroups.com>
|Sent: Friday, September 05, 2003 8:03 PM
|Subject: [MSG-1] Not connecting to data channels
|
|
|> My Tellique software (Html shell) shows I am receiving
|announcements OK
|and
|> that the system is trying to connect to data channels 2 & 3.
| The log file
|> shows a new key issued, an attempted connection and key
|expired, but no
|> channel data is received.
|>
|> The IP address for the card is 192.168.238.238 and my user
|name and ID
|have
|> been verified and entered into Tellique recv.ini. I have
|reinstalled the
|> software and the DVB card, even changed PCI slots all to no
|avail. The
|> system was working up to the point where I decided to reinstall it!!
|>
|> What should I try next?
|> Thanks
|> Roger
|
|Long shot .... When you load up Setup4PC and select data
|services do you
|have :-
|
|1. PID's 100,300.301 and 512 decimal
|2. Under provider name you should see IP CastEumetsat
|3. Under Transponder you should see 129 : 11096 MHz.
|
|Hope you find the problem.
|
|Regards
|Douglas.
|
|
|
|------------------------ Yahoo! Groups Sponsor
|---------------------~-->
|Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
|Printer at Myinks.com. Free s/h on orders $50 or more to the
|US & Canada. http://www.c1tracking.com/l.asp?cid=5511
|http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/RLYolB/TM
|---------------------------------------------------------------
|------~->
|
|To unsubscribe from this group, send an email to:
|MSG-1-unsubscribe@yahoogroups.com
|
|
|
|Your use of Yahoo! Groups is subject to
|http://docs.yahoo.com/info/terms/
|
|