Date
1 - 7 of 7
Meteosat-10 & Meteosat-11 mission swap - MSG Data Manager actions
|
For those those using the MSG Data Manager, I am hoping that the procedure used before will be all that is needed:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On your Rapid Scanning instance, March 13, 15:00 UTC or later: Stop the program scanning Setup Advanced Select the MSG-4 satellite Close the program Restart on March 28 or earlier. 28 March 08:00 UTC service is due to resume. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On your prime, zero degree, instance, early on March 21: Setup Advanced Select the MSG-3 satellite Close the program Restart the program. Data should resume that day after 2-6 hours approximately. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For RSS SEVIRI meteorological products please let me know whether the file name change causes any problems. I hope the transition is a smooth one. Fingers crossed! Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
Filenames
After Meteosat-10 has taken over the FES service from 21/03/2023, filenames will be as follows: For 0° SEVIRI image data: H-000-MSG3__-MSG3________-<channel>______-<segment>___-yyyyMMddhhmmss-C_ For 0° SEVIRI meteorological products: W_XX-EUMETSAT-Darmstadt,SING+LEV+SAT,MET10+<product>_C_EUMG_ yyyyMMddhhmmss _3.bin After Meteosat-11 has taken over the RSS service from 28/03/2023, filenames will be as follows: For RSS SEVIRI image data: H-000-MSG4__-MSG4_RSS____-<channel>______-<segment>___-yyyyMMddhhmmss-C_ For RSS SEVIRI meteorological products: W_XX-EUMETSAT-Darmstadt,SING+LEV+SAT,MET11+<product>_C_EUMG_ yyyyMMddhhmmss _4.bin |
|
|
|
In the frame of the Meteosat-10 / Meteosat-11 mission swap, the 0 deg SEVIRI data will be unavailable on 21 March 2023 from 08:00 up to 14:00 UTC. Meteosat-10 is planned to start scanning in FES shortly before 9:00 and dissemination of its images with geometric rectification is planned to resume at 09:00 UTC. However it is expected that a good radiometric quality will only be reached after 2 to 6 hours. Meteorological Products might take up to two weeks to reach a nominal quality.
|
|
|
|
James Brown
Seems to have worked well here David. Mission swap successful I think. Images back on.
toggle quoted message
Show quoted text
Thank you for the pointers. James. On 12 Mar 2023, at 15:04, David J Taylor GM8ARV 🏴 🇪🇺 via groups.io <david-taylor@...> wrote: |
|
|
|
Mission swap successful. All Systems work fine here too.
This morning, before I went to work, I started a 4th instance of MSG-Data-Manager for MSG-3, so that both satellites (MSG-3 and 4) could be received in parallel. When I came back from work, all I had to do was kill the instance of MSG-4. The MSG Animator meanwhile put the images of MSG-4 and then of MSG-3 together without any problems. |
|
|
|
James Brown
RSS back nicely this morning.
Thanks to all. James. _._,_._,_ |
|
|
|
Von: "James Brown" <satellite@...>
Betreff: Re: [MSG-1] Meteosat-10 & Meteosat-11 mission swap - MSG Data Manager actions Datum: Tue, 28 Mar 2023 12:27:13 +0100 An: <MSG-1@groups.io> Antwort an: <MSG-1@groups.io> RSS back nicely this morning.Same from my side. After setting the receiving channel right here, the flow is back. :) Cheers, U. |
|
|