Hello Hugo,
I assume you will have to make some internal changes to the program to accommodate the Meteosat 10/11 swap. Meteosat 10 now FES sat from this morning.
It still thinks Meteosat 10 (MSG3 in file name) data is RSS and deals with it accordingly.

Regards,
Douglas.

Hi Douglas,

You should be able to change the parameters in the settings of the geo satellite window.
Just swap MET_11 with MET_10 and in the search name MSG4 with MSG3.
So the first tab will be Meteosat 10 and the second tab will be Meteosat 11 ( and RSS ).
I'am not able to test it for the moment because I'am in Tenerife...

Regards,

Hugo


P.S.

If you screw up the Geo.ini file, just delete it and the program will create a new one with the original values.


Op 2023-03-21 13:52, schreef Douglas Deans via groups.io:

On 21/03/2023 17:44, Hugo wrote:

Hi Douglas,
You should be able to change the parameters in the settings of the geo satellite window.
Just swap MET_11 with MET_10 and in the search name MSG4 with MSG3.
So the first tab will be Meteosat 10 and the second tab will be Meteosat 11 ( and RSS ).
I'am not able to test it for the moment because I'am in Tenerife...
Regards,
Hugo
P.S.
If you screw up the Geo.ini file, just delete it and the program will create a new one with the original values.

====================================================================================

Ah thanks Hugo. Completely forgot about those ini files.
I am sure that will work fine.
Thanks for the reply and enjoy the rest of your holiday.

Regards,
Douglas.

Hi Douglas,

Holidays are over ...
I included an updated Geosatellites.ini file with the updated parameters.
Just copy that ini file to the EUMETCastView directory and everything should work as before.

Kind regards,

Hugo

On 03/04/2023 17:37, Hugo wrote:

Hi Douglas,
Holidays are over ...
I included an updated Geosatellites.ini file with the updated parameters.
Just copy that ini file to the EUMETCastView directory and everything should work as before.
Kind regards,
Hugo

=======================================================================================

Many thanks Hugo. I did get the Meteosats up and running successfully but could not get correct country outline locations for the videos.

Not sure if they also rely on the ini file for those parameters.
Perhaps the way I changed the ini files was incorrect so I will see if your update resolves that.

Again my thanks. Hope you had a good holiday.

Best regards,
Douglas.

On 03/04/2023 19:25, Douglas Deans via groups.io wrote:

On 03/04/2023 17:37, Hugo wrote:

Hi Douglas,

Holidays are over ...
I included an updated Geosatellites.ini file with the updated parameters.
Just copy that ini file to the EUMETCastView directory and everything should work as before.

Kind regards,

Hugo

=======================================================================================
Many thanks Hugo. I did get the Meteosats up and running successfully but could not get correct country outline locations for the videos.
Not sure if they also rely on the ini file for those parameters.
Perhaps the way I changed the ini files was incorrect so I will see if your update resolves that.
Again my thanks. Hope you had a good holiday.
Best regards,
Douglas.

====================================================================================================

Adding to my last mail, I put in your new ini file Hugo, but there still seems to be problems with the meteosat 10 and 11 country outline locations for the videos. Images are fine.

Kind regards,
Douglas.