I have the Hauppauge nexus-s card I beleive its a skystar 1 but not
sure. Does anyone have this card running with the Tellicast system.

Been using the card for sat TV for a long time but never used it for
data until recently on the sat at once service.

Regards
Bill

Bill,

I have successfully used an Hauppauge WinTV-Nova card during the
summer. Make sure you have the right driver from the Hauppauge
website (probably Hauppauge UK or Germany is better than US, as DVB
is not yet too popular in the US). Your card is much more
sophisticated compared to the Nova, so you will only use part of it
with EumetCast.

Tellique does not talk directly to the card, it uses the standard
TCP/IP driver to do that. You will then need to make sure the card
has the appropriate virtual Ethernet driver installed, and that the
IP address is configured as 192.168.238.238.

Let me know if you need further help.

Bye, Luca
Brussels, Belgium

--- In MSG-1@..., "Bill Maddox" <tobymaddox@y...> wrote:

I have the Hauppauge nexus-s card I beleive its a skystar 1 but not
sure. Does anyone have this card running with the Tellicast system.

Been using the card for sat TV for a long time but never used it

for

data until recently on the sat at once service.

Thanks for the response but my card died a death last night :(
While I'm waiting for a new one or a repair I went and bought the
new Hauppauge Dec3000-s. So far my testing has shown it to be a
little faster for my downloads on SAT@Once, used to have to wait
hours before i had anything worth looking at.
Looks like I will go ahead and register for msg-1 and start getting
some decent images, I'm used to the gray grainy sort :)

Again thanks for the info


Regards
Bill