Date
1 - 5 of 5
C10 HV2
|
Manu
Hello everyone
Since last night I have no signal on my HV2 receiver (11 387.5 mHz):
 Did I miss something? Manu |
|
|
|
Cornish Man
I haven't had any signal on 11.387.5 mhaz for months On 25/11/2022 12:27, Manu wrote:
|
|
|
|
On 25/11/2022 12:27, Manu wrote:
Hello everyoneThe screen-shot is very difficult to read. Next time, please "attach" the image, not include it inline with the text. Try the PrtScn (print screen) key to capture the whole screen to the clipboard and past into an image editor to crop down to the region you want. 11387 MHz has been in continuous operation as far a I know. I check it twice a day. Your BAS/HVS-1 SNR shows as 9.4 dB, which is far too low for HVS-2. Look for 12 dB if possible. Perhaps it's the same for "cornishman" as well? Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
Manu
I'm going to check my satellite dish this weekend, maybe it has moved.
Could the commissioning of C3 HV2 have an influence on the signal levels of HV1/HV2? Manu |
|
|
|
On 25/11/2022 17:55, Manu wrote:
I'm going to check my satellite dish this weekend, maybe it has moved.Yes, and No. If your LNB is not correctly adjusted in skew, some of the C3 signal will be picked up by the LNB, so a little of the vertically polarised signal will get into the horizontal channel of the LNB and reduce the SNR. The 11263 vertical signal was off between 20-Sep and 11-Nov, so there would have been a step change on 11-Nov. However, there was a vertical signal from another server on 11263 from Jul-2018 until 20-Sep-2022, so there would have been cross-polarisation interference present during that whole period. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
