Date
1 - 13 of 13
overlays
|
On 04/09/2022 20:36, Robert Moore wrote:
Thanks David, I cannot look at any VIS images at present because I turned my PC off while away at a conference. Now only have IR images from this evening, will pick this up again tomorrow.Robert, Thanks for the screenshot. The rectification point at 45.5 degrees is correct, and the program uses that value (+/- 0.5 degrees) to change the "msg" in the saved image file name to "iodn". The previous program changed "msg" to "iodc", so if that worked before the update it should continue to work after the update, with "iodc" becoming "iodn". I've had no other reports of this issue. I have no idea what's happening! Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
Robert Moore
Thanks David, I cannot look at any VIS images at present because I turned my PC off while away at a conference. Now only have IR images from this evening, will pick this up again tomorrow.
toggle quoted message
Show quoted text
Meanwhile, my equivalent file attached. Robert -----Original Message-----
From: MSG-1@groups.io <MSG-1@groups.io> On Behalf Of David J Taylor GM8ARV ?????????????? ???? via groups.io Sent: 02 September 2022 15:42 To: MSG-1@groups.io Subject: Re: [MSG-1] overlays On 02/09/2022 11:43, Robert Moore wrote: David, getting closer: my saved IODC images are in the format 202209010845-msg-ch02.jpg. I attach a (reduced) ch02 image to show that this really was yesterday's Indian Ocean data!Well, there's the 40 degree offset! I don't know why, but on the Logs tab, the prolog header shows the rectification longitude, and that should look like the attached i.e. 45.5 degrees. Does it say "from prolog" at the top? Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
On 02/09/2022 11:43, Robert Moore wrote:
David, getting closer: my saved IODC images are in the format 202209010845-msg-ch02.jpg. I attach a (reduced) ch02 image to show that this really was yesterday's Indian Ocean data!Well, there's the 40 degree offset! I don't know why, but on the Logs tab, the prolog header shows the rectification longitude, and that should look like the attached i.e. 45.5 degrees. Does it say "from prolog" at the top? Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
Robert Moore
David, getting closer: my saved IODC images are in the format 202209010845-msg-ch02.jpg. I attach a (reduced) ch02 image to show that this really was yesterday's Indian Ocean data!
toggle quoted message
Show quoted text
Robert -----Original Message-----
From: MSG-1@groups.io <MSG-1@groups.io> On Behalf Of David J Taylor GM8ARV ?????????????? ???? via groups.io Sent: 02 September 2022 06:51 To: MSG-1@groups.io Subject: Re: [MSG-1] overlays On 01/09/2022 22:08, Robert Moore wrote: David,The versions numbers are fine, Robert. The source files will still say "IODC", but the saved image files should have "iodn" like: 202209020000-iodn-ch09.jpg It's the "iodn" which tells GeoSatSignal that it's the new - "n" - longitude. That is determined by a field in the satellite data sent for each segment of the image. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
On 01/09/2022 22:08, Robert Moore wrote:
David,The versions numbers are fine, Robert. The source files will still say "IODC", but the saved image files should have "iodn" like: 202209020000-iodn-ch09.jpg It's the "iodn" which tells GeoSatSignal that it's the new - "n" - longitude. That is determined by a field in the satellite data sent for each segment of the image. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
Robert Moore
David,
toggle quoted message
Show quoted text
My versions as follows: MDM V3.1.21.1337 GSS V8.2.6.1187 Images still coming through as .... _MSG2_IODC Something wrong there! On the receiver PC I'm pointing to E1B-GEO-1 'IODC High Rate SEVIRI' Doc.No. : EUM/OPS-MSG/DOC/22/1284775 does not really clarify matters for me. So still a bit stuck on this one. Robert -----Original Message-----
From: MSG-1@groups.io <MSG-1@groups.io> On Behalf Of David J Taylor GM8ARV ?????????????? ???? via groups.io Sent: 01 September 2022 14:57 To: MSG-1@groups.io Subject: Re: [MSG-1] overlays On 01/09/2022 12:59, Robert Moore wrote: Thank you DavidRobert, Have you updated GeoSatSignal to the current release. The new Indian Ocean data is only supported in V8.2.6 or later. Note that the image files names now have IODN rather than IODC: 202209010900-iodn-ch09.jpg You are running the current MSG Data Manager, I trust? V3.1.20? Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
On 01/09/2022 12:59, Robert Moore wrote:
Thank you DavidRobert, Have you updated GeoSatSignal to the current release. The new Indian Ocean data is only supported in V8.2.6 or later. Note that the image files names now have IODN rather than IODC: 202209010900-iodn-ch09.jpg You are running the current MSG Data Manager, I trust? V3.1.20? Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
Robert Moore
Thank you David
toggle quoted message
Show quoted text
I will go overlay hunting later. Immediate problem with IODC, I looked at this again and have noticed that (using whole hemisphere image in False Colour) all the longitudes are about 40 degrees out. Horn of Africa is at 5 degrees east and Bay of Bengal at 45 degrees (Dutch coast and Aden - as was). I'm trying to think where I might have gone wrong with settings. Robert -----Original Message-----
From: MSG-1@groups.io <MSG-1@groups.io> On Behalf Of David J Taylor GM8ARV ?????????????? ???? via groups.io Sent: 31 August 2022 15:10 To: MSG-1@groups.io Subject: Re: [MSG-1] overlays On 29/08/2022 15:33, Robert Moore wrote: Thanks David,Robert, Colour in the format they supply (4-bit PNG data) I cannot accommodate. There is new a new beta version here: https://www.satsignal.eu/software/beta.htm which handles mid-Atlantic 500mb overlays. I found two, one 24-hour forecast and one 36-hour forecast. Of course, neither overlay the current data perfectly, so if there's a better source please let me know and I might be able to fit it in. I hope that helps. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
On 29/08/2022 15:33, Robert Moore wrote:
Thanks David,Robert, Colour in the format they supply (4-bit PNG data) I cannot accommodate. There is new a new beta version here: https://www.satsignal.eu/software/beta.htm which handles mid-Atlantic 500mb overlays. I found two, one 24-hour forecast and one 36-hour forecast. Of course, neither overlay the current data perfectly, so if there's a better source please let me know and I might be able to fit it in. I hope that helps. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
On 29/08/2022 15:33, Robert Moore wrote:
Thanks David,Thanks, Robert. I can take a look at that later tomorrow. Likely the original code was purely for monochrome images, so some work may be required to handle colour. In particular I see that the background is not pure white, so a simple chart/background cannot be used. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
Robert Moore
Thanks David,
toggle quoted message
Show quoted text
A_24hr500.gif at https://ocean.weather.gov/shtml/A_24hr500.gif I'm sure when I last tried to overlay one of these charts it didn't have the coloured numbers etc but just black and white contours. But the naming is the same. The above chart would be OK, nevertheless. Robert -----Original Message-----
From: MSG-1@groups.io <MSG-1@groups.io> On Behalf Of David J Taylor GM8ARV ?????????????? ???? via groups.io Sent: 29 August 2022 14:45 To: MSG-1@groups.io Subject: Re: [MSG-1] overlays On 29/08/2022 12:21, Robert Moore wrote: One overlay that has eluded me is the 500mb chart on WV images in GSS.Robert, Not something I've tried. Could you please send me a 500 mb chart in the exact naming convention you use. If it's in the same projection as the MSLP chart it may be easy to accommodate. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
On 29/08/2022 12:21, Robert Moore wrote:
One overlay that has eluded me is the 500mb chart on WV images in GSS. AnyoneRobert, Not something I've tried. Could you please send me a 500 mb chart in the exact naming convention you use. If it's in the same projection as the MSLP chart it may be easy to accommodate. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv |
|
|
|
Robert Moore
One overlay that has eluded me is the 500mb chart on WV images in GSS. Anyone had any luck with this?
Robert
From: MSG-1@groups.io <MSG-1@groups.io>
On Behalf Of Ernst Lobsiger via groups.io
Sent: 29 August 2022 09:50 To: MSG-1@groups.io Subject: Re: [MSG-1] Using DWD synoptic overlays (MSLP charts)
David and All, |
|
|
.jpg)