Date
1 - 6 of 6
Bdadataex
|
Aldo
Good day to the group
Following the installation information of the Eumetsat TBS6903 card, I cannot make two Running Dual BDADataEx work.
Someone did it, and how they did it
Thanks if you can give me a solution
kind regards
Aldo Fantoni ik1rgm
|
|
|
|
On 05/01/2022 17:03, Aldo via groups.io wrote:
Good day to the groupAldo, I have some notes here: https://www.satsignal.eu/wxsat/dvb-s2/T1-T2.html#single-cable 73, David GM8ARV -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv
|
|
|
|
Aldo
Hi, David
Where can I find the program
SR-Test.exe
to make this script you recommend
73 and thanks Aldo ik1rgm
|
|
|
|
On 07/01/2022 14:02, Aldo via groups.io wrote:
Hi, DavidALdo, The program is from CrazyCat, and may already be installed with his software. As I can't find a copy online, I've put my copy here: https://www.satsignal.eu/software/SR-Test.exe If you already have a splitter, it's probably better to use that rather than the "single-cable" trick. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv
|
|
|
|
Aldo
Hi David
Thanks for the reply and the program and advice.
Unfortunately I have a problem with the parabola installed and it does not receive the HVS-1 channel.
Due to the wind it has moved and receives only eumetcast base and of 80 cm I have to replace with 100 cm. thanks 73 aldo ik1rgm
|
|
|
|
On 09/01/2022 09:57, Aldo via groups.io wrote:
Hi DavidAldo, There's a document here with the footprint of the 10A satellite: https://www.eumetsat.int/eumetcast https://www-cdn.eumetsat.int/files/2020-04/img_eutelsat_10a_ku_band_cover.jpg Your 80cm may be OK once it is fixed very well! The 100 cm will get more signal. but it will also catch more wind, and it will also be more sensitive to any changes in its pointing. You can't win! It is also very important to get the dish correctly set: - azimuth (obvious) - elevation (obvious) - skew of the LNB (to minimise reception of the vertically polarised signal) - focus (move the LNB slightly closer to or further away from the dish) My apologies if you already know all this, but we are dealing with very weak and quite wide bandwidth signals. Every extra fraction of a dB is worth the effort. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv
|
|
|