Got it!!!!!!
|
Vincenzo Mone
Hello Folks, This message to tell everyone that helped that finally I got it. Yes finally I got both incoming data from both BAS and HVS-1 With just 1 dish and the SR1 device. I have understood that my dish is small for both the services, Just 80cm from South Italy, but nevertheless, with the help of the Ayecka-SR1-console software and a fine tuning of the dish I managed to get the signal from 8.6 to 9.1 and can get both the services. In the next days I will try to increase the size of the dish to at least 100cm But if I can manage it as I have to put it on the balcony, I will try with a 120cm one. Again a big Thanks to thanks to those who spent a word in helping me.
Now please David If you read this email and you remember my softwares purchased and upgraded From you, will you please tell me which one I need to upgrade and which to get new as new services, maybe with the prices in PM. thanks
73 de Enzo IK8OZV ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
|
|
|
|
Philip Robinson
Hi Vincenzo I am really pleased for you and welcome to the hvs-1 club......only one way to go now hvs-2 :-)   good luck Philip
------ Original Message ------
From: "Vincenzo Mone" <vimone@...>
To: "'MSG-1 Mailing List'" <MSG-1@groups.io>
Sent: 28/08/2021 19:10:49
Subject: [MSG-1] Got it!!!!!!
|
|
|
|
On 28/08/2021 19:10, Vincenzo Mone wrote:
Now please David If you read this email and you remember my softwares purchased and upgradedVincenzo, As far as I can see all your licences are current. Updates and beta versions can be downloaded from my Web site. I run all the beta versions as if they were "production" versions, so I would advise: - First update to the current version of each program (making sure to read the release notes). Current: https://www.satsignal.eu - Then update to the beta versions if there are features you need. Beta: https://www.satsignal.eu/software/beta.htm 73, David GM8ARV -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv
|
|
|
|
Vincenzo Mone
David,
toggle quoted messageShow quoted text
thanks for your reply, is there on your site any page that explains how to set all the programs? I have started with the MSGDM but as it is a long time I did not use them I forgot how to set them. I have installed the TEllicast as all the datas goes in just one folder also if I prefer in different ones but I could not find the correct path where the program has to find the files so I just installed, how I said The tellicast in one folder and in the MSGSM I gave as path: F:\EUMETCast\received\bas\default\ But I am noticing that all the pictures I got in the various small windows of the MSGDM MSG HRIT Are stretched out, if I remember it was as I saw before the RSS ones. Any advices please? I do not know if the MSGDM is to use also for the HVS-1 reception. Thanks for your efforts. 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 ********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
-----Messaggio originale-----
|
|
|
|
On 29/08/2021 12:50, Vincenzo Mone wrote:
David,Enzo, The programs have sensible defaults, and all have read-me files. I suggest you refer to the notes you made when you first installed them. You can check the FAQ as well: https://www.satsignal.eu/software/faq.htm The default install from EUMETSAT does separate out the data into different directories, but I suggest you start with what you currently have. Stretched thumbnail images for RSS is normal. The saved images should have the correct aspect ratio. If the images in the full-scan or IODC are wrong follow the instructions here: https://www.satsignal.eu/software/faq.htm#MSG-Q66 The MSG Data Manager can handle the 10-minute Himawari data on the HVS-1 stream. 73, David GM8ARV -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter: @gm8arv
|
|
|
