|
TBS6909X-V2 Update
Hi ! A Quattro LNB supports only one polarisation / range at one specific connector: LV, LH, HH, HV. Quattro LNBs are designed tu unse with multi swwitches. Regards Hartmut Von: MSG-1@groups.io <MSG-1
Hi ! A Quattro LNB supports only one polarisation / range at one specific connector: LV, LH, HH, HV. Quattro LNBs are designed tu unse with multi swwitches. Regards Hartmut Von: MSG-1@groups.io <MSG-1
|
By
Hartmut Schulla
· #30895
·
|
|
PyTROLL/SatPy Starter Kit V3.0
Hi Old Farts! Metop is also working with eps-gbl! Thank you Ernst! Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Freitag, 8. Jänner 2021 2
Hi Old Farts! Metop is also working with eps-gbl! Thank you Ernst! Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Freitag, 8. Jänner 2021 2
|
By
Hartmut Schulla
· #30824
·
|
|
SR1 Controller frozen.
Hi! Check your power supply and replace it, if original, with an stronger one. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von geojohnt via groups.io Gesendet: Samstag, 9. Jänner
Hi! Check your power supply and replace it, if original, with an stronger one. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von geojohnt via groups.io Gesendet: Samstag, 9. Jänner
|
By
Hartmut Schulla
· #30818
·
|
|
PyTROLL/SatPy Starter Kit V3.0
Hi! If you are on Python Miniconda 3.7 you should upgrade to 3.8 (latest version) ! Regards Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ferdinand Valk Gesendet: Samstag, 9. Jänner 2021 10:32
Hi! If you are on Python Miniconda 3.7 you should upgrade to 3.8 (latest version) ! Regards Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ferdinand Valk Gesendet: Samstag, 9. Jänner 2021 10:32
|
By
Hartmut Schulla
· #30812
·
|
|
PyTROLL/SatPy Starter Kit V3.0
Hi, Old Farts! Ernst, you forget to mention, current users of miniconda have to deinstall python miniconda first! I started a clean install and everthing works fine. Regards Hartmut Von: MSG-1@groups.
Hi, Old Farts! Ernst, you forget to mention, current users of miniconda have to deinstall python miniconda first! I started a clean install and everthing works fine. Regards Hartmut Von: MSG-1@groups.
|
By
Hartmut Schulla
· #30809
·
|
|
OLCI ERR and OLCI EFR
Hi folks! I user 2 SR1 connected to a splitter without DC block. The advantage is, that the SR1s will not get hot anymore. The current per SR1 is now divided by 2. Works great. Regards Hartmut -----Ur
Hi folks! I user 2 SR1 connected to a splitter without DC block. The advantage is, that the SR1s will not get hot anymore. The current per SR1 is now divided by 2. Works great. Regards Hartmut -----Ur
|
By
Hartmut Schulla
· #30757
·
|
|
Pytroll/SatPy for EUMETCast
Hi Ernst! I use it! Works great. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Montag, 4. Jänner 2021 23:33 An: MSG-1@groups.io Betreff: R
Hi Ernst! I use it! Works great. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Montag, 4. Jänner 2021 23:33 An: MSG-1@groups.io Betreff: R
|
By
Hartmut Schulla
· #30701
·
|
|
Pytroll/SatPy for EUMETCast
Hi! In my latest version now I use the timestamp of the involved segments. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Montag, 4. Jänner
Hi! In my latest version now I use the timestamp of the involved segments. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Montag, 4. Jänner
|
By
Hartmut Schulla
· #30698
·
|
|
Pytroll/SatPy for EUMETCast
Hi Ernst! I corrected the timestamp. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Montag, 4. Jänner 2021 17:19 An: MSG-1@groups.io Betref
Hi Ernst! I corrected the timestamp. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Montag, 4. Jänner 2021 17:19 An: MSG-1@groups.io Betref
|
By
Hartmut Schulla
· #30695
·
|
|
Pytroll/SatPy for EUMETCast
My latest picture with Pytroll/Satpy – It works! Regards Hartmut
My latest picture with Pytroll/Satpy – It works! Regards Hartmut
|
By
Hartmut Schulla
· #30691
·
|
|
Pytroll/SatPy for EUMETCast
Hi! I just seen it while searching in the archive! My Age is 71😊 Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Hugo Gesendet: Mittwoch, 29. April 2020 15:26 An: MSG-1@groups.io
Hi! I just seen it while searching in the archive! My Age is 71😊 Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Hugo Gesendet: Mittwoch, 29. April 2020 15:26 An: MSG-1@groups.io
|
By
Hartmut Schulla
· #30689
·
|
|
Pytroll/SatPy for EUMETCast
Hi Christian! It works! After comparing the files, I recognized that I had a typo in the definitions: Some trailing invisible characters or blanks. Thank you! Regards Hartmut Von: MSG-1@groups.io <MSG
Hi Christian! It works! After comparing the files, I recognized that I had a typo in the definitions: Some trailing invisible characters or blanks. Thank you! Regards Hartmut Von: MSG-1@groups.io <MSG
|
By
Hartmut Schulla
· #30684
·
|
|
Pytroll/SatPy for EUMETCast
Hi! Thanks fort he hint! I did the following: In the ppp_config i created a new folder named „readers“ and in this new folder I copied the mentioned .yaml file with the new extension definition inside
Hi! Thanks fort he hint! I did the following: In the ppp_config i created a new folder named „readers“ and in this new folder I copied the mentioned .yaml file with the new extension definition inside
|
By
Hartmut Schulla
· #30682
·
|
|
Pytroll/SatPy for EUMETCast
Hi Ernst! Everything looks fine. All three METOPs are working well. Regards hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Sonntag, 3. Jänner 2021
Hi Ernst! Everything looks fine. All three METOPs are working well. Regards hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger via groups.io Gesendet: Sonntag, 3. Jänner 2021
|
By
Hartmut Schulla
· #30680
·
|
|
Pytroll/SatPy for EUMETCast
Hi! Thank you! Now it works fine. I don’t understand why the extension .eps-glb wont work. Regards Hartmut for n in range (0, len(bestfiles)): shutil.copy2(bestfiles[n], tmpdir) os.system ("ren *.eps-
Hi! Thank you! Now it works fine. I don’t understand why the extension .eps-glb wont work. Regards Hartmut for n in range (0, len(bestfiles)): shutil.copy2(bestfiles[n], tmpdir) os.system ("ren *.eps-
|
By
Hartmut Schulla
· #30678
·
|
|
Pytroll/SatPy for EUMETCast
Hi folks! Something's going wrong with the files. I see in temp dir now all files without any extension: the script looks like: # Sorting seems not necessary?! bestfiles = sorted(bestfiles) print (bes
Hi folks! Something's going wrong with the files. I see in temp dir now all files without any extension: the script looks like: # Sorting seems not necessary?! bestfiles = sorted(bestfiles) print (bes
|
By
Hartmut Schulla
· #30674
·
|
|
Pytroll/SatPy for EUMETCast
Hi Christian! Thanks for the info, bur it does not work for me: This are the files I moved in the temp dir. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Christian Peters via gr
Hi Christian! Thanks for the info, bur it does not work for me: This are the files I moved in the temp dir. Regards Hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Christian Peters via gr
|
By
Hartmut Schulla
· #30670
·
|
|
Pytroll/SatPy for EUMETCast
HI Ernst! I’m now writing a small script to use decompressed eps-glb segment files who are provided by Metop Manger. Regards hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger
HI Ernst! I’m now writing a small script to use decompressed eps-glb segment files who are provided by Metop Manger. Regards hartmut Von: MSG-1@groups.io <MSG-1@groups.io>Im Auftrag von Ernst Lobsiger
|
By
Hartmut Schulla
· #30667
·
|
|
Pytroll/SatPy for EUMETCast
Hi! Thanks for the quick reply, but .eps-glb files are not the same as .bz2 files. In the python script .bz2 files are needed for decompression. Any suggestions? Regards Hartmut -----Ursprüngliche Nac
Hi! Thanks for the quick reply, but .eps-glb files are not the same as .bz2 files. In the python script .bz2 files are needed for decompression. Any suggestions? Regards Hartmut -----Ursprüngliche Nac
|
By
Hartmut Schulla
· #30665
·
|
|
Pytroll/SatPy for EUMETCast
Hi I’m running Pytroll/Satpy with MSG-4 and other geostationary satellites with success for some days. How can I get METOP running, because there are no RAW-Files available. Only .hpt files are in the
Hi I’m running Pytroll/Satpy with MSG-4 and other geostationary satellites with success for some days. How can I get METOP running, because there are no RAW-Files available. Only .hpt files are in the
|
By
Hartmut Schulla
· #30663
·
|