Daniele, these *.ini files are highly TC station dependant. I have no idea what data you subscribed to and what kind of data management and/or data processing you intend to setup. There is no "one siz

Daniele, a closer look shows that you have all your hvs-1 files in a /default directory as is first setup by EUMETSAT. !!! THIS IS *VERY* BAD !!! This way you are mixing GOES16 and GOES17 files. I did

Daniele, Have you done point 6) of the HOWTO? It seems 'area' is not defined ... ... 6) Environment variables ------------------------ Pytroll/SatPy is mainly looking for two environment variables: #

Dear GNU/Linux users The version of szap-s2 distributed in the evaluation kit with dvbond0 produces considerable additional UNIX system load with TBS-6903X/09X cards. One reason is an added retreival

Graham, szap-s2 is probably the same you already have. mc-grp-join MUST be copied and will run in the background with the new solution. There is no eluna.tgz this time. Just use the same paths you hav

Hi Graham, it's up to you, whether you want to be a forerunner again. The change is not complicated. You stop /etc/init.d/tellicast-client and /etc/init.d/dvb-eumetcast. Make a backup of dvb-eumetcast

Dear GNU/Linux users As long as I can remember the static multicast router "smcroute" has been the solution to prevent packet loss when the TC client joins and leaves multicast groups. Smcroute seems

Roland, FY2 is in Basic Service. David already gave you the relevant link: https://eumetsatspace.atlassian.net/wiki/spaces/DSEC/pages/700055570/Channels+and+Packet+Identifiers+PIDs Ernst

Roland, FY-2G/2H is found in EUMETSAT_Data_Channel_12. File Names are "Z_SATE_C_BABJ..." Ernst

Roland, - GOMS (Electro-L) data has not been available for 7 mothhs now due to relocation of the satellite (see EUMETSAT user notification service) - GOES-16 is on E1H-TPG-1 (HVS-1, not bas) - Himawar

Roland, first of all this can only work if "desktop-pl2a052" resolves to some IP address. But maybe this is only a Windows name given to your receiver PC? If you open a CMD window (black "DOS-Window")

Hugo, thanks a lot for your first look at the problem. My OOP knowledge is just enough to use some methods but I never programmed an object so far. I had a look with h5dump into the FY-2G/H files and

Hugo, as you know my OOP knowledge is close to zero and I mostly work with mc and the command line. SatPy is lacking a reader for FY-2G/H that we receive in Basic Service EUMETSAT_Data_Channel_12. You

Roland, The port 2517 is deprecated. EUMETSAT port numbers used for the TC clients WEB interfaces are now: BASIC Service 8100 HVS-1 Service 8200 HVS-2 Service 8201 You can try on the receiver PC http:

John, That's what I got from Metop-C yesterday. A big gap as well ... Cheers, Ernst

Ferdinand and All Yes PyTROLL/SatPy is about learning by doing. BTW it also comes with a slstr_l2 reader. After some try and error here is one my first images. Even Lake Geneva has a ssst value :-). C

Ferdinand, thanks for sharing this. Let others adapt it for Metop-A and Metop-C so we get broader user expertise. AFAIK Metop-B and Metop-C are in the same orbit app. 180° out of phase. So someone can

Ferdinand, The reader only takes decompressed files. The single pass version decompresses bestfiles[]. For your multipass version you have to decompress goodfiles[]. You must add very few lines: ... #

Daniele, Learn a minimum of Python. I crippled a Sentinel-3A script of mine for you. Unzip your files into the Sentinel-3A temp directory (EMCdata/tempdirs/xsen3a). Pray and try. Ernst

Daniele, the answer is that you probably cannot do anything because the scripts assume that you have received a full day of Sentinel-3X and then depending on your point of interest find the proper fil