The Eumetsat site carries specific instructions. Search for: "TBS 5927 DVB-S2 Receiver EUMETCast Windows Setup Guide" Virus-free. www.avg.com

A query if I may. I don't know if this is a problem suffered by anyone else, but my two instances of the GOES ABI manager, with their headers as high as I can get them, show on screen only to the bott

Ernst, and anyone to whom it may be of interest, after yesterday's dismal weather, with a SNR of near 8.0dB, and losses even of basic data, I took advantage of the sunny spell this morning to climb on

Thank you Ernst, it looks as though I may need a larger dish, as it was professionally adjusted and checked only a few short weeks ago, with a brand new Inverto LNB. I also then connected my Rx laptop

Ernst, thank you for your reply. Using BDAdataEx the Modcod box is set to 'All', so I assumed it covers everything in the same way as it does PIDs. The two TC ini files are each as downloaded with the

Good day all, perhaps someone far better informed than I would be kind enough to put me on the straight and narrow. Having recently replaced my dead SR1 with a TBS 5927 after some months lay off, and

Good evening all, having replaced my suspect SR1 Rx with a USB TBS-5927, I have carefully followed the Eumetsat setup guide for that receiver, and with all settings exactly as on page 12, I have obtai

Thank you all, yes I had tried the Telnet option from PuTTY, which came up with an error message "Network Error; connection refused"; and, having searched the oracle, the BIOS, (but the latter seems t

Thank you both Ernst and David, when using PuTTY to check the SR1 configuration as suggested, I was presented with an "unable to access serial port" error message. I am still using Win 7 Ultimate, and

Thank you Ernst, I will investigate the possibility of an uncalled for Rx configuration change. As far as a replacement receiver is concerned I am, unfortunately perhaps, one of the few people whose d

Ernst, I had indeed first checked the voltage in the cable end nearest to the LNB, but I then removed the LNB cable from its RF1 connector at the SR1, fitted the short test cable from my signal meter,

Hello all, perhaps someone could offer advice please. A few days ago I lost signal from my Ayecka SR1 Rx. The receiver appeared all correct except for the red locking LEDs. Suspecting a faiIed LNB I b

This may, or may not, be connected with your problem, but I recently experienced a similar situation after recent updates to a purchased AVG antivirus programme. This was despite applying scanning exc

I understand that asteroid TC4 should, weather permitting, be visible from the UK for a day or two from the 19th. inst. Is there any means to assess whether it may perhaps afford us a moon transit as

Thanks David, never let it be said that I cannot take a hint. I have uploaded a photo to an album under the name "Himawari Moon". Sadly, the full disk image is now of so low a resolution as to make it

Yes Hugo, I realised as soon as I sent it, and have already forwarded the file to your other address. ATB, Terence

Hugo, here is the complete 0330 file as a jpeg - with corrected moon. ATB, Terence

If you have been downloading the bracka.gif file from wettercentrale.de, alter the URL in Autoget to http://old.wetterzentrale.de/pics/bracka.gif http://old.wetterzentrale.de/pics/bracka.gif http://ol

Nigel, is Mersea Island close enough? Regards, Terence

Type: Planned Maintenance Ann Nr: 1846 Rev: 1 Start Time: 2016/05/11 08:00 End Time: 2016/05/11 18:00 Satellites: Subsystem: Component: Subject: ground-segment-maintenance Impact: risk-of-interruption