Ernst, So I was right-your Ramdisk is a faked HD for the client and you solved the file moving to the HD and the tmp fragment problem with your script! Great-this i/o waits we see will be no problem a

Ernst, thanks for providing your script. I will try to switch to Ramdisk and your script at the end of the week. Regards, Christian Am 02.03.16 um 15:38 schrieb ernst.lobsiger@... [MSG-1]: [Non-

Ernst, switched to the new 2.12.1.-11 client, the Ramdisk and the mvmsg script. Let's see how it will work! :-) Regards, Christian Am 01.03.16 um 22:52 schrieb Christian Peters hctpeters@... [MS

Ernst, I hope it will not overflow!?😳 It goes to the disk and is grabbed by MSG!? Your script already copies the renamed temps to the target-which is sdb!? Hope it works-otherwise it will stall-just o

Ernst, it dropped dramatically because the machine stalled in the night and it furthermore removes all files prior to 10h. have to look for the power supply ...maybe it's to weak... HVS should raise a

Ernst, yes....still beating with my hardware...! :-( I ordered a new Power supply...I hope that's the problem for my freezes. As the OS sometimes doesn't come up if I reboot maybe it's really an under

Ernst, thank you very much. I will adapt and try...! Did already some tests with xrit2pic so it's running here. Regards, Christian Am 06.03.16 um 19:23 schrieb ernst.lobsiger@... [MSG-1]:

Ernst, again...thank you very much. I set up my 3 hour pics by commandline and a cron job for every picture ( ...a really long xrit2pic commandline! :-D) Your scripts are much more smooth. I use the l

Ernst, .... Using preferences ... ==================================================== 16799 items (files) found. ---------------------------------------------------- Info: Using overlay file msg_9.5d

Ernst, the coastlines caused the error. Movie is generated. Have to play a little bit with frame rates and maybe projections... Btw......the machine stopped again...! :-/ I'm fed up now and ordered a

Rob, that sounds good. But I would ask for a little bit improvement of the commandline. If I run a script at the end of the day and would like a color movie on daylight, it would be great to have a co

Ernst, no success: memtest86: no errors, DIMMs reseated, switched to a new root disk too. First time it looks good, but stalled again. But the new machine is arriving soon...! :-) Regards, Christian A

Ernst, you are right. I looked into your xrit2pic.ini file. There is really an enc-speed and I took it over into my .ini. So most things are already working...maybe a time frame/range could be added..

Ernst, thank you very much for that statistic collector. I will give it a try. Maybe you could add an optional summary as David use? Maybe a 'nice to have' and informative too. Regards, Christian Btw.

Ernst, it's a never ending story...! :-/ I got the new machine but it is not running. After doing some test I think one Dimm is broken. I set it up now with my 16GB module I already had, installed all

Ernst, it's eluna.hcpeters.de:81 No...reception level S/NR is good...no problems with the old machine. But now lots of problems as you can see?! :-/ Am 13.03.16 um 19:03 schrieb ernst.lobsiger@...

Ernst and David, yes...maybe I really should look into the BIOS! Damn....not at home so have to wait till tomorrow....! :-D I even thought of an USB problem as all packets were recovered!? C-State cou

Ernst, I think there is an C-State setting: From the Manual: ...." Intel SpeedStep Technology: Intel SpeedStep technology allows processors to switch between multiple frequencies and voltage points fo

Ernst, yes...I did remove the routing setting and did a reboot (interface address as already set as described in your post) but no success! :-( I really have to check the BIOS setting....maybe it's po

Ernst, yes...I did that BIOS reset because of encircle my installation problems (which were solved I think.....the pair of two 8GB DIMMs seem not to like each other, installed RAM from the problematic