Dear all, After installing a larger 105 cm dish I have 1,4 dB more SNR comparing to my 88 cm dish. (12,0 vs 10,6 dB) Satellite is locked but the transport status is not locked. Switching back to the 8

Thanks John for contacting EUMETSAT. First I noticed my SNR was 4 dB down. But after restarting the SR1 and tweaking the cross polarisation my SNR was about 1 dB down. With a 88 cm dish not much link

At this moment my signal (15 km SW from Amsterdam) is about 4 dB down. 8.7 dB instead of 12,7 dB. HVS connection is lost... Is it just me with such a big signal drop? Greetings, Herman Vijlbrief

Many thanks David for this prompt update! I had made a separate Himawari instance of MDM pointed to the E1H-TPG-2 directory on my RX PC. As far as i can see after a quick look all the Himawari data is

Everything looks normal here Ian. Regards, Herman Op 27-10-2016 om 12:08 schreef 'Ian' iandeans142@... [MSG-1]:

Op 12-8-2016 om 19:24 schreef thorsten.miglus@... [MSG-1]: I See the same missing segments as Thorsten. (OS of the RX PC is Win 7 ultimate 32 bits) Greetings, Herman

Many thanks Hugo! Problem solved. Greetings and have a nice weekend, Herman Op 15-1-2016 om 15:58 schreef hvanruys@... [MSG-1]:

Hugo, I use the program to decode VIIRS data. Most of the time in true colours. After the command "make image" I see when pushing the VIRRS button that an image was made. Normally I use the stereograp

Hugo, Many thanks for your your excellent software! Until release 1.1.2 the software works without any problem and creates beautiful pictures. Release 1.1.3. works fine but stop working when I push th

Enzo, In the parameters setting of the receive.ini file f.i. [parameters] interface_address=0.0.0.0 file_database_size=282000000 #file_delivery_counter=50 file_delivery_speed=20000000 Greetings, Herma

David, Many thanks for this update! RGB works perfect. Cheers, Herman

Roland, Did you change the the interface_address in the TelliCast recv.ini to 0.0.0.0 ? That did the trick in my setup.... regards, Herman Vijlbrief roland-fechter@... [MSG-1] schreef op 27-11

Ian, David, Just to report: I use the SR1C with software version 250. The link margin threshold settings are unchanged since i set them more then one week ago to -0.6 and -0.3 Regards, Herman Vijlbrie

'Ian' iandeans142@... [MSG-1] schreef op 9-11-2014 23:00: Thanks Ian for your reply. In the mean time I managed the MODCOD setting and al works fine now. Greetings, Herman >

Thanks Arne for your reply. My software version of the SR1C is 105b250 and the firmware version is 202b922. I followed the explanation as described and modified the MODCOD setting to 8PSK3/5 alone. An

First of all may thanks to David, Arne and all others who helps me to receive the DVB-S2 data stream. Also thanks to Eumetsat providing the Eumetcast setup guide for the SR1. With all this knowledge I

roland-fechter@... [MSG-1] schreef op 7-11-2014 18:19: Roland, Just 1,5 hour ago i pointed my disk to 10A after i locked my SR1 on the DVB-S2 signal with my disk pointed at 9E. Using the conso

No missing Metop A or B chunks here yesterday and today until now. (Still using the DVB-S service....) Last year i had an increase of missing Metop chunks. After upgrading my old Pentium 4 RX PC to an

Since 0400 FY-2D and since 0430 FY-2E data is back again. Greetings Herman

Op 27-11-2011 13:34, ericmacgurk@... schreef: Eric. Do you use the current version of Metop Manager V 1.4.13.291? This is necessary because of the new Metop compressed format. Regards, Herman