All bolts checked - only one needed tightening. Signal strength still 35 dBm, C/N now 10.7 dB _very_ marginal I would have thought. Robert ==================================== Agreed, Robert, although

From: Robert Moore OK I’ll hold fire on this until I’ve looked at other options. I don’t really want to lose HVS-1. Robert ====================================== Robert, You don't need to lose HVS-1 -

Robert, Aha, 'that more like it.' The low SNR possibly causing your your more frequent gaps in data? Regards, John. ================================= A stable 11 dB SNR is OK, but not if it's dipping

David, Thanks for the advice. Right, Windows search disabled. Interesting(?) that. When I go to Settings > Windows Security > Firewall and Network protection [Domain network No action needed. Private

David, Thanks for your further comments. I run MSG-4, IODC and RSS MDM's but in reduced channels. The above MSG-4 MDM FSD FY-2H, FY-2G both 6 channels selected - GOMS all channels selected but it seem

David I use(d) one common RAM disk of 3 GB for BASIC + HVS-1 + HVS-2. Your problem are the broken tmp files. I remove those if they have *not* been touched for XX minutes. Maybe your trimtree can do t

David, the installation is relatively new. I like to observe how it performs during the upcoming solar outage. To write this up for GEO Quarterly is possible. But I need some help with correcting the

Hi all, now I am using a 128 GB external SSD with USB 3.0 for all temp data from BAS, HVS-1 and HVS-2. All target directories are situated on the SSD too. There is no need for Robocopy, because David'

David, Thanks for pointing me (again) to TD 15. It really is now quite comprehensive. And I still have my 999 MB RAMdisk unused which I was going to (will) experiment with. As you know Ops want me to

David I started this email mid-morning and finished it in the afternoon! "Unused files": The EARS AVHRR Manager should be handling the NOAA-19 data. Is there an image on the NOAA_19 tab, and if so, wh

David, Sorry for the delay in responding - just seen this 'way down the pile.' My SNR is always around 13.00 dB in clear sky conditions, so I guess that is not the problem and disabling HVS-1 won't ma

Graham [] David will certainly comment as an experienced SR1 user how well the ON /OFF switching with SNR works. Regards Ernst ========================= I run three SR1 receivers (for various reasons)

From ESA: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Join us for the ESA’s third edition of the Φ-week. Φ-week is the annual Earth Observation event organised by ESA-EOP. It focuses on innovation in E

Hi This question may have been asked before but I cant seem to find it I have two SR1's one has BAS/HVS1 and the other has HVS2 Is this the best arrangement or might it be better to move the HVS1 onto

From ESA: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Register now to take part in ESA's Open Day 2020 [ https://www.esa.int/About_Us/ESTEC/Open_day_2020/Register_now_to_take_part_in_ESA_s_Open_Day

It was quite unusual!David Very unususl indeed. I do not remember to have seen something like that. And YES it would be worth asking what they did! Maybe someone at EUMETSAT follows the discussion her

On Sun, Sep 20, 2020 at 01:45 AM, David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺 wrote: By the way, there was a sustained missed/recovered packets period last night on HVS-2 from ~20:20 to 20:45, seen by all active

David, as Ernst said, try to disable C-States (I did in complete). Cures the problem with the SkyStar2 eXpress HD and even on Smaug where I use two TBS 5925 the get full service. Even there it was ok

David Running out of other options: Have you tried to disable C-States in the BIOS (if possible at all)? Christian recently had this deja vue with a Technisat SkyStar2 eXpress HD card on his Ancalagon

Progress report. I've been trying to resolve the steady missed/recovered TelliCast packets issue on PC Penguin, and I did further tests yesterday and today but without success so far. - Adding a RAMdi