|
Checking a LNB
diogenes1@...
Hello All,
Thank you to those who replied to my settings request. Other than mounting an LNB into a dish and checking for a signal is there any other way, perhaps using a multimeter, to check whether an LNB is functioning? Regards, Peter
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Ernst Lobsiger
Ferdinand,
that's a very nice image. I wonder if the structures we see on the ice is not copied from the thin cloud overhead (see gray cloud lower left of A-68a). Unfortunately Sentinel 3A/3B have repeat cicles of 27 days, so the last picture of this quality should be from November 5th. And *YES*, here it is! Cheers, Ernst
|
|
|
|
Re: EUMETSAT new website.
On 03/12/2020 10:07, geojohnt via groups.io wrote:
All,Yes. Did you not follow the user invite to test which was on Twitter? Sadly, it's broken many of the links, including links found by Google. It makes it more difficult to help folks when you know the information is there, but it can't be found. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Ferdinand Valk
May I add yesterday’s Sentinel 3B 11:29 image, showing considerable ice surface detail. Ferdinand
From: MSG-1@groups.io On Behalf Of Ernst Lobsiger via groups.io
Sent: Thursday, 03 December, 2020 01:39 To: MSG-1@groups.io Subject: Re: [MSG-1] Pytroll/SatPy for EUMETCast
Here is an early hit of Sentinel-3A and good old SNAP 4.0 convert.
|
|
|
|
EUMETSAT new website.
geojohnt@...
All,
Gosh, have you seen the newly revamped EUMETSAT website?
Regards,
John Tellick.
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Ernst Lobsiger
Here is an early hit of Sentinel-3A and good old SNAP 4.0 convert.
Cheers, Ernst
|
|
|
|
Re: Eumetcast - SatPy Problem: "No IMPF configuration field found in prologue"
Ernst Lobsiger
Francis,
have you tried the full monty debug stuff? Before the script code begins: from satpy.utils import debug_on debug_on() Regards, Ernst
|
|
|
|
Re: Eumetcast - SatPy Problem: "No IMPF configuration field found in prologue"
Christian Peters
BTW: I got this too, but it’s just an info:
toggle quoted messageShow quoted text
[INFO: 2020-12-02 20:36:07 : hrit_msg] No IMPF configuration field found in prologue. Didi you try other slots!? Maybe this one slot is corrupt due bad receiving? Regards, Christian
|
|
|
|
Re: Eumetcast - SatPy Problem: "No IMPF configuration field found in prologue"
Christian Peters
Francis,
toggle quoted messageShow quoted text
al fine here with this composite, see pic. Do you really provide all channels uncompressed and even the PRO and EPI file? Could you check whether „files" contains all needed files? Maybe you should post some more of the code? Regards, Christian
|
|
|
|
Sentinel 3 iceberg A 68A animation
|
|
|
|
Eumetcast - SatPy Problem: "No IMPF configuration field found in prologue"
Hi folks, hope you are all well, greetings from South West Ireland!
I have been using Pytroll, then SatPy for some time in Linux. I moved to Python3 a few months ago, got is sort of sorted, but for a while I have problems with the natural_color_with_night_ir and night_ir_with_background Composits. I use the first for creating an animation. It used to work, but not now. I am even providing all the available wavelengths in case I have one missing, but I still get the same error. When I run the script and get to the global_scene.load([self.composite]) I get this error hrit_msg - INFO - read_prologue - 287 - No IMPF configuration field found in prologue. I have looked at the SatPy Issues, nothing there. There is a post here but that was caused by misnaming the composit. The composit I want is definitely in the reader global_scene = Scene(filenames=files, reader='seviri_l1b_hrit') Does anyone have any ideas why I get this? Thanks.......
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Ernst Lobsiger
Here comes South Georgia with it's custom Stereographic Projection.
Cheers, Ernst
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Hugo
You can even see A-68a iceberg from the Meteosat images ...
This is the same projection I used from my previous images ... grts, Hugo
|
|
|
|
Re: Settings for HVS-1 & 2
Cornish Man
toggle quoted messageShow quoted text
From: diogenes1 via groups.io
Sent: 02 December 2020 13:47 To: Msg 1 Subject: [MSG-1] Settings for HVS-1 & 2
Hello All, Could someone please confirm, or otherwise, the following settings.
HVS-1 frequency 11263 MHz, horizontal polarisation, ModCodes 16 APSK_2/3, GoldCode 0 HVS-2 frequency 11388 MHz, the rest as above.
Thank you Peter. Mono no aware (物の哀れ)
-- Securely sent with Tutanota. Get your own encrypted, ad-free mailbox: https://tutanota.com
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Ernst Lobsiger
On Wed, Dec 2, 2020 at 03:33 AM, Graham Woolf wrote:
Hi ErnstGraham, here is the Python equivalent of what I do with bash and SNAP 4.0 convert. You can integrate that in your Python Sentinel processing script to look for special images. Cheers, Ernst
|
|
|
|
Re: Settings for HVS-1 & 2
Ernst Lobsiger
Peter,
Please look on page 10 ff https://www-cdn.eumetsat.int/files/2020-04/pdf_td15_eumetcast.pdf Regards, Ernst
|
|
|
|
Settings for HVS-1 & 2
diogenes1@...
Hello All, Could someone please confirm, or otherwise, the following settings. HVS-1 frequency 11263 MHz, horizontal polarisation, ModCodes 16 APSK_2/3, GoldCode 0 HVS-2 frequency 11388 MHz, the rest as above. Thank you Peter. Mono no aware (物の哀れ) -- Securely sent with Tutanota. Get your own encrypted, ad-free mailbox: https://tutanota.com
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Hugo
Hi,
I uploaded 6 images from Metop of the A-68A iceberg ( 2 oct, 15 oct, 1 nov, 15 nov, 1 dec , 2 dec 2020) in a perpective projection. Interesting to see the speed of that iceberg .... (https://www.flickr.com/photos/137270544@N02/) grts, Hugo
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Ernst Lobsiger
On Wed, Dec 2, 2020 at 03:33 AM, Graham Woolf wrote:
take that data but only process individual segments as they arrive so nothing fancyHi Graham First of all todays image is even better looking. It's a central pass over South Georgia and a cloud free view on the iceberg. I also process every segment of the Sentinels-3A/3B. I still use SNAP 4.0 convert. But as in the python scripts I can set a POI or even a list of POIs. These images are then hard linked in a special directory and are not deleted after a while like all others. This is still a bash script but it should be easy to implement that with the range search code I use in all LEO satellite satpy scripts. Regards, Ernst
|
|
|
|
Re: Pytroll/SatPy for EUMETCast
Graham Woolf
Hi Ernst
Re I now also asked the Sentinels to have an eye on that. How have you done that ? Do you have a python script for Sentinel too ? I take that data but only process individual segments as they arrive so nothing fancy Regards Graham
|
|
|
